What causes engine vibration in the Geely Boyue?

2 Answers
Helen
07/24/25 3:30am
Engine vibration in the Geely Boyue is typically caused by a dirty throttle body or severe carbon buildup in the fuel injectors. An engine is a machine that converts other forms of energy into mechanical energy. It can refer to either the power-generating device or the entire machine including the power unit. Engine types include internal combustion engines, external combustion engines, gas turbines, and electric motors. The Geely Boyue is a compact SUV with dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, featuring a wheelbase of 2670mm. This 5-door, 5-seat SUV comes with a 6-speed manual transmission and a top speed of 195 km/h. The vehicle utilizes a turbocharged intake system, delivering a maximum horsepower of 163ps and a peak torque of 250nm. It employs front-wheel drive with a MacPherson strut front suspension and a multi-link independent rear suspension, built on a unibody structure.
Was this review help?
7
1
Share
FaithLynn
08/10/25 11:03pm
My Geely Boyue's engine has shaken a few times, and there are quite a few reasons for it. Worn-out spark plugs or faulty ignition coils are the most common causes, leading to shaking due to incomplete fuel combustion. It could also be dirty fuel injectors, clogged fuel lines affecting fuel supply, or issues with the air flow meter causing uneven air intake. Carbon buildup in the throttle body can also make the engine unstable, especially noticeable during idle. Sometimes, damaged engine mounts can cause vibrations to transfer into the cabin if they're not securely fixed. I recommend checking the spark plugs first—if they've been used for tens of thousands of kilometers, they're prone to failure. Clogged fuel filters or dirty air filters also need cleaning; don't neglect these routine maintenance tasks. The Geely Boyue's engine is quite common, and these issues have been encountered before. It's best to visit a professional shop to read the fault codes with a diagnostic tool to confirm the exact problem and get it repaired promptly to avoid further damage. After all, the engine is a core component and shouldn't be taken lightly.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

What Documents Are Needed for New Vehicle Inspection?

Here are the specific materials required for new vehicle inspection: 1. Fill out the "Motor Vehicle Inspection Record Form". For private vehicles, in addition to the owner's signature, a copy of the owner's ID card must be attached. For company vehicles, a copy of the enterprise code certificate must be attached, and the "Power of Attorney" must be filled out and stamped with the official seal. 2. The vehicle identification number (VIN) rubbing paper should be pasted in the corresponding position on the "Motor Vehicle Inspection Record Form". 3. Vehicle license (both original and duplicate pages). 4. Compulsory traffic accident liability insurance policy (duplicate). 5. Self-repaired vehicles or those repaired by a repair shop need to be stamped on the inspection form (exempted for the first and second annual inspections of new vehicles). 6. Motor vehicle safety technical inspection certificate. 7. Light gasoline vehicles need to provide a tail gas inspection qualified report using the steady-state working condition method.
1
5
Share

When Should Spark Plugs Be Replaced in a Car?

A car's spark plugs should be replaced under the following circumstances: difficulty starting, reduced power, excessive exhaust emissions, or increased fuel consumption. Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers, but this may vary depending on the brand and engine type. It is recommended to follow the vehicle's manual. The following standards can be used as a reference for maintenance replacement: platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, and remove the high-voltage ignition wires, marking each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one, ensuring that any external debris such as leaves or dust is cleaned off before proceeding. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to fully tighten it. Reinstall the high-voltage ignition wires in the correct firing order and secure the cover back in place.
4
4
Share

How to Use Headlights When Driving at Night?

Here are the specific methods for using headlights during night driving: 1. Under normal circumstances, only the low beam is necessary when driving at night, and turn signals should be used when turning. Urban roads are well-lit, so there is no need to use high beams unless there is insufficient lighting. 2. When encountering oncoming traffic, if you are using low beams, no adjustment is needed. If high beams were previously on, they should be switched to low beams in advance. Otherwise, high beams can prevent the oncoming driver from accurately judging your vehicle's width, potentially causing an accident. After passing the oncoming vehicle, decide whether to switch back to high beams based on road conditions. 3. When driving straight through an intersection at night, use low beams. At uncontrolled intersections, slow down and alternately flash high and low beams as a signal. 4. When overtaking, first activate the turn signal, then honk and quickly alternate between high and low beams to alert the vehicle ahead. After confirming that the vehicle ahead has no intention of changing lanes, proceed with the overtaking maneuver swiftly. Avoid driving side by side for an extended period. Once the overtaking is complete and sufficient distance from the overtaken vehicle is achieved, use the turn signal to merge back into the original lane.
8
1
Share

Why does the dash cam only record for a few minutes before stopping?

If the dash cam stops recording after just a few minutes, it might be due to the recording time settings. Here are the specific details about dash cams: 1. The loop recording settings for dash cams usually offer different time options such as 1 minute, 2 minutes, 3 minutes, 5 minutes, or 10 minutes. Once a segment is recorded, it moves on to the next. 2. When setting the loop recording time, avoid choosing a duration that is too short or too long. If the recording time is too short, the video will be split into more segments, increasing the chance of dropped frames. Conversely, if the time is too long, fewer videos will be stored, and they will be overwritten quickly. It is recommended to set the recording time to 3 or 5 minutes for optimal performance. 3. A dash cam is a device that records images, sounds, and other relevant information during vehicle travel. Once installed, it can capture the entire driving process in video and audio, providing evidence in case of traffic accidents.
16
3
Share

Can Winter Tires Be Used in Summer?

Winter tires can be used in summer. Here are the specific details about winter tires: 1. Winter tires are designed to provide friction in low-temperature environments. They are very soft, maintaining sufficient grip on snow and offering good noise reduction. However, their structure is not intended for summer use, as they have poor heat dissipation and are more prone to blowouts. 2. The soft structure of winter tires, optimized for snowy conditions, wears out quickly on summer roads and performs poorly in terms of water drainage. 3. Winter tires are generally suitable for temperatures below 7 degrees Celsius. In regions with consistently high temperatures, using them year-round may be acceptable. Based on the usage environment, if temperature variations are minimal, all-season tires may be a better option.
5
1
Share

Can You Make a U-Turn Over a Single Yellow Line?

Single solid yellow lines cannot be crossed for a U-turn, while single dashed yellow lines allow U-turns under safe conditions. Here are the specific details about single yellow lines: 1. Single solid yellow lines must not be crossed, hence U-turns are prohibited. Single dashed yellow lines may be crossed for U-turns or lane changes when traffic laws and right-of-way rules are followed, provided it is safe. 2. Generally, solid yellow lines are used to separate lanes and are painted along the center of the road. Roads with four or more lanes typically use double solid yellow lines, while narrower roads use single solid yellow lines to minimize space taken by lane markings. 3. Dashed yellow lines are usually marked on narrower roads to separate opposing traffic lanes. When safe, drivers may cross them for overtaking or making U-turns.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.