What causes engine vibration in the Camry?

1 Answers
FinleyLynn
07/29/25 7:49pm
Toyota Camry engine vibration can be caused by various factors, including ignition timing, carbon buildup in the engine, and excessively high engine temperature, all of which may lead to engine vibration. If severe engine vibration occurs while driving, it is advisable to stop and inspect the vehicle promptly to avoid affecting normal operation. Below is a brief introduction to this vehicle model: 1. The all-new generation Toyota Camry is built on the new TNGA platform. In terms of body dimensions, the car measures 4900mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. 2. The facelifted eighth-generation Camry is equipped with three powertrains: TNGA 2.5L HEV, TNGA 2.5L, and TNGA 2.0L, offering a total of ten models across three series: Luxury, Sport, and Hybrid.
Was this review help?
13
1
Share
More Forum Discussions

What does it mean when the atoiltemp light comes on?

atoiltemp light is the transmission oil temperature warning light. Here are the relevant details: 1. When the light comes on: If it appears before inserting the key to start the vehicle, it's part of the self-check system and will automatically turn off after starting. 2. Meaning when illuminated: If the light comes on while driving, it indicates the transmission oil temperature is too high, and you should pull over to let it cool down. 3. Handling measures: This usually occurs during traffic jams or mountain driving. If it happens frequently, it's recommended to visit a 4S store to clear the code or upgrade the program. The existing active safety features in the vehicle's safety system ensure reliability during both normal road and off-road driving. When transmission oil temperature reaches 115°C, DTC (Diagnostic Trouble Code) will be set and information stored to assist technical analysis.
4
1
Share

Where is the oil dipstick located on the Haval H6?

Haval H6 oil dipstick is located on the inner side of the engine. To check the oil level: Locate the oil dipstick. The oil dipstick is usually located near the engine, either on top or on the side. A distinctive feature of the dipstick is that it has a pull ring, making it easy to identify. Pull out the oil dipstick. Checking the oil level: To check the oil level, ensure the vehicle is cooled down. If you have just driven the car or the engine is running, checking the oil level will not be accurate. Clean off any oil residue. After pulling out the dipstick for the first time, wipe it clean with a tissue, then reinsert it. Pull out the oil dipstick a second time to check the oil level on the dipstick.
13
4
Share

Is a 90°C water temperature normal for an Audi Q5?

Audi Q5's water temperature between 80°C and 90°C is considered normal. Reasons for overheating: One common cause of overheating is insufficient coolant, which often occurs when owners neglect timely top-ups. It's crucial to note that when adding coolant, you must use the same brand and model to prevent chemical reactions between different formulations that could render the antifreeze ineffective. Another possibility is leakage causing coolant loss - owners should carefully inspect for leaks and repair them promptly. Reasons for low temperature: Low water temperature may indicate cooling fan malfunction. Normally, fans only operate when temperature is high and remain inactive at normal or lower temperatures. Another potential cause is thermostat failure. The thermostat regulates coolant flow into the engine water jacket based on temperature readings. If defective, uncontrolled continuous coolant flow into the engine for cooling will cause temperature drops.
8
5
Share

What Causes Air Suspension Failure in Audi Vehicles?

Audi vehicle air suspension failure may be caused by air leakage. Troubleshooting method: The air suspension can be manually adjusted. The technician accessed the vehicle's MMI system and found that the lift mode of the air suspension remained in an unselectable gray state. Subsequently, a diagnostic tool was used to enter the adjustment system to perform the inflation function. Initially, the front axle inflation proceeded normally, and the front of the vehicle rose noticeably. However, after completing the inflation operation, the vehicle body began to descend, and a distinct air leakage sound could be heard from the right front shock absorber. Repeating the operation and exiting the vehicle for observation confirmed the presence of an air leak. Repair process: A specialized air suspension leakage detector was connected for testing. First, the detector was used to raise the shock absorber and open the switches on both sides. After the shock absorber pressure gauge reached its maximum value, the valve on the connected side was closed for observation. At this point, the pressure gauge displayed a gradually decreasing value, accompanied by the sound of air leakage. After two minutes, the value stabilized, and the leakage sound disappeared, confirming that the right front shock absorber indeed had an air leakage fault.
20
5
Share

Is the first maintenance at BMW 4S stores free?

BMW 4S stores do not offer free first maintenance. The main items replaced during the first maintenance are engine oil and the oil filter: It is advisable for car owners not to miss the first maintenance, as the new car is in a running-in state where mechanical parts are breaking in, and the demand for lubricants is relatively high. This is precisely the significance of performing the first maintenance. Car maintenance refers to the regular: preventive work of inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Modern car maintenance: Modern car maintenance mainly includes the maintenance scope of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The purpose of car maintenance: To keep the car clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
10
2
Share

How long is the battery warranty for the Cadillac CT6?

Cadillac CT6 battery warranty is 1 year. The following are precautions for daily battery use: Long-term parking of the car: You can disconnect the two electrodes on the battery. Note that when removing the positive and negative electrode wires from the electrode posts, remove the negative wire first, or disconnect the negative terminal from the car chassis. Then remove the other end marked with the positive terminal. During daily driving: Regularly check whether the small holes on the battery cover are ventilated. If the small holes on the battery cover are blocked, the generated hydrogen and oxygen cannot escape, and when the electrolyte expands, it will break the battery casing, affecting the battery's lifespan. When starting the car: The total duration of each engine start should not exceed 5 seconds, and the interval between restarts should be no less than 15 seconds. If the car still does not start after multiple attempts, check other aspects such as the circuit, ignition coil, or fuel system for issues.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.