What Causes Engine Start-Stop Malfunction?

1 Answers
EmmettDella
07/30/25 9:45am
Engine start-stop malfunction may be caused by insufficient battery power. Here are precautions for engine start-stop: 1. Do not use air conditioning with start-stop: If air conditioning is used with start-stop, the engine will restart within 10 seconds. With start-stop activated, the air conditioner only blows air without cooling. If the temperature difference between inside and outside becomes too large, the engine will restart, and frequent starts and vibrations will significantly reduce passenger comfort. 2. Do not use automatic start-stop in traffic jams: Turning off the start-stop system to improve passenger comfort is more important than reducing fuel consumption. Additionally, starting the engine after stopping results in slower acceleration. Turning off automatic start-stop reduces excessive engine wear caused by frequent starts and prevents sluggish acceleration. 3. Do not activate the start-stop system on slopes: When temporarily stopping on a slope, avoid using the start-stop system. Releasing the brake may cause the vehicle to slide directly, and if the engine fails to ignite in time, insufficient braking force assistance can lead to dangerous situations.
Was this review help?
16
5
Share
More Forum Discussions

What are the functions and benefits of paint coating?

Introduction to the benefits of paint coating: 1. Paint coating can protect the vehicle from minor daily scratches. Even when external forces exceed the elastic protection range of the coating, it usually only leaves scratches on the coating without damaging the paint surface. 2. Paint coating isolates the paint surface from the external environment, effectively preventing oxidation and resisting corrosion from bird droppings, insect fluids, acid rain, etc. 3. Paint coating can make the car paint shine like a mirror, making the body easier to clean and maintain. A simple rinse with water can restore its brightness as new, saving a lot on car washing costs. 4. Paint coating can enhance the brightness of the car surface, making the paint look crystal clear and radiant, with a brightness level of over 95% (new cars typically have around 70%).
14
0
Share

What does mode mean in a car?

In cars, mode generally refers to pattern or direction. Some functions of the mode button are explained below: 1. Mode on the multifunction steering wheel: If mode is located on the multifunction steering wheel, it is basically a button to switch between car multimedia modes, used to toggle between FM radio, AM radio, CD, or USB modes. Additionally, when listening to the radio, CD, or external audio source, pressing the MODE button will synchronize the display between the tachometer and speedometer with the system. 2. Mode for air conditioning control on the center console: If the mode button is in the air conditioning control area of the center console, it is used to switch the car's air conditioning outlet modes, generally toggling between modes such as foot vent, head vent, and windshield vent.
10
1
Share

Does the vehicle inspection validity period until July refer to the beginning or end of the month?

The annual inspection expiration date marked as July on the vehicle license refers to the end of July. Below are the regulations for different vehicle inspection cycles: 1. Commercial vehicles: Passenger transport vehicles must be inspected annually within the first 5 years; after 5 years, every 6 months. 2. Trucks: Trucks and large/medium-sized non-commercial passenger vehicles must be inspected annually within the first 10 years; after 10 years, every 6 months. 3. Small vehicles: Small and mini non-commercial passenger vehicles must be inspected every 2 years within the first 6 years, and those meeting exemption conditions only need to obtain inspection labels. Starting from November 20, 2020, 7-9 seat non-commercial mini/micro buses (excluding vans) are included in the exemption range.
11
3
Share

Which validity period applies when merging two driver's licenses?

The highest permissible vehicle type recorded on the driver's license serves as the standard for processing services. Below is extended information about license expiration: 1. Expired or revoked driver's license: Although the validity period is indicated on the license's inner page, many people overlook it. If the license has been expired for less than 1 year, the holder only needs to submit materials to the DMV within 1 year of expiration to renew it. 2. Driving with an expired license: Driving a motor vehicle with an expired license constitutes a violation and may result in fines. Driving after the license has been revoked may lead to fines and possible administrative detention.
10
5
Share

What is the seat height of the CFMOTO 250SR?

The seat height of the CFMOTO 250SR is 780mm. Related specifications: 1. Engine: Single-cylinder, liquid-cooled, four-stroke, with a displacement of 249ml. Bore × stroke is 72×61.2mm, and the maximum power is 20.5/9750kw(r/min). 2. Body: Length × width × height is 2010×750×1080mm, with a wheelbase of 1360mm. 3. Wheel specifications: Front wheel 110/70r17, rear wheel 140/60r17.
14
0
Share

Which is Suitable, 12V or 24V Car Battery Charger?

A 12V 24AH car battery charger using a 1.5A current can fully charge the battery within 16 hours. Common knowledge about battery charging and lifespan: The smaller the charging current (trickle charging), the longer the battery's lifespan. This is because a larger charging current leads to more intense chemical reactions inside the battery, which directly affects its lifespan. CCA parameter of the battery: There is a CCA parameter in the performance specifications of a car battery, which stands for the maximum discharge current value of the battery. When charging the battery, the charging current must never exceed the CCA current value. Otherwise, forced charging is no different from destroying the battery.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.