What Causes Engine Shaking Issues?

1 Answers
SanJordan
07/29/25 10:57am
Engine shaking issues can be caused by the following reasons: 1. Engine Mount Deterioration or Loosening: Engine mounts are rubber blocks placed between the engine and the vehicle frame. If these mounts become worn or loose, the engine's vibration will become noticeably abnormal. 2. Engine Misfire: An engine misfire occurs when one or more cylinders fail to function properly. Common symptoms include intermittent exhaust flow, severe shaking of the exhaust pipe, noticeable engine vibration, and sometimes accompanied by a sputtering sound. 3. Carbon Buildup: Excessive carbon deposits inside the engine can reduce ignition efficiency and decrease air intake performance, ultimately leading to engine shaking and sluggish acceleration. 4. Fuel System Malfunction: Using an incompatible fuel grade can reduce the vehicle's power output and performance. Alternatively, a blocked fuel tank vent, clogged fuel tank switch, fuel filter, or fuel line between the tank and carburetor can restrict fuel supply, resulting in a lean air-fuel mixture and engine shaking. 5. Air Intake System Fault: A clogged air filter due to prolonged use without cleaning can restrict airflow, leading to an overly rich air-fuel mixture and reduced engine power. 6. Cold Start: During a cold start, the engine's lubrication is less effective due to thicker, less fluid oil, which can cause mechanical wear noises. Additionally, the lower coolant temperature and richer air-fuel mixture during cold starts can lead to incomplete combustion, resulting in engine shaking.
Was this review help?
1
5
Share
More Forum Discussions

How to Remove Mold from Car Seats?

After using specialized mold removers, proceed with repairs to restore the original appearance. In fact, seat maintenance should start from daily care. If mold adheres to the leather for a long time, it can damage the leather. Especially when the seats get wet, they must be wiped immediately and dried in a well-ventilated area to prevent mold growth.
14
3
Share

How to Remove Paint from Leather Seats?

Paint on leather seats can be gently wiped off with gasoline, as gasoline and paint undergo a corresponding chemical reaction, causing the paint to dissolve. After using gasoline to wipe off the paint, you can then gently scrub the area with soap a second time, which will make the leather seats cleaner after removing the paint. In addition to using gasoline, you can also first lightly scrape the affected area with a tool, which helps loosen the paint on the surface of the leather.
5
5
Share

Why Does BYD Charging Always Stop Automatically?

BYD charging frequently stops automatically for the following reasons: 1. Automatic power cut at the start of charging: This is most likely due to battery damage or poor contact. 2. Abnormal faults during the charging process: The charging system will automatically cut off power, and a fault prompt will appear on the electric vehicle's instrument panel or corresponding fault information will be displayed on the charging equipment. 3. Automatic power cut after the battery is fully charged: This is a normal phenomenon caused by the protection function. If the issue does not fall under the above scenarios, please seek assistance from professionals at a repair shop.
13
4
Share

How to Correct Left Side Being Too Wide When Reversing into the Garage?

When reversing into the garage, it's crucial to maintain a steady speed, especially when backing in from the right side. If the distance between the car body and the right front corner is wider than three fingers, there's no need to adjust the steering wheel. If it's narrower, turn the steering wheel back half a turn. Once you see the right rear corner, immediately check the left rearview mirror. As soon as you spot the left bottom corner, straighten the wheel immediately, then gradually fine-tune the direction.
19
4
Share

Do I need to empty the trunk for vehicle inspection?

Vehicle inspection does not require emptying the trunk. Here are the relevant details: Vehicle annual inspection can be done three months in advance: According to the "Motor Vehicle Registration Regulations", vehicle owners can apply for the inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection validity period. Bring your driver's license, ID card, vehicle registration certificate, and the current valid compulsory traffic insurance policy. Exempt vehicles: For motor vehicles within the exemption scope, prepare the above materials and go to the nearest vehicle management office to handle the annual inspection. Staff will input the corresponding motor vehicle and compulsory traffic insurance information into the system, and you can then receive the new inspection compliance mark.
10
3
Share

What Causes the Sand-Like Friction Sound When Rolling Up the Window?

Window glass seal aging: The abnormal noise when rolling up the car window glass may be caused by aging of the window glass seal. After the seal ages, the friction increases, leading to the noise. This situation tends to be more noticeable in summer, as the aged seal expands more significantly after exposure to sunlight, resulting in greater friction and more severe noise. Dirty gap between the glass and seal: Another possible reason is that the gap between the glass and the seal is too dirty. Particles in the dust rubbing against the glass can also produce abnormal noise.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.