What Causes Engine Shaking and the Malfunction Indicator Light to Illuminate?

1 Answers
KarterLynn
07/29/25 9:16pm
When the engine malfunction indicator light comes on and the vehicle starts to shake, it is necessary to stop immediately and call for a tow truck to await rescue. The causes of this phenomenon include: 1. Poor combustion of the air-fuel mixture in the engine. When the mixture in the cylinder is too rich, the vehicle may experience knocking, shaking, and other symptoms. 2. Abnormal fuel supply pressure or a malfunctioning intake pressure sensor. If the fuel pump's supply pressure is abnormal or the intake pressure sensor provides incorrect readings or performs poorly, it can lead to body shaking and insufficient power. 3. Faulty operation of the spark plugs, high-voltage wires, or ignition coils. Poor performance of the ignition system or improper spark plug firing can also cause the engine malfunction light to illuminate, along with vehicle shaking and power loss.
Was this review help?
10
4
Share
More Forum Discussions

Is it mandatory to wear a full-face helmet for motorcycles?

Motorcycles do not necessarily require wearing a full-face helmet. Helmet: A helmet consists of a shell, cushioning layer, padding, wearing device, and accessories. The shell is made of tough material capable of absorbing certain impact energy, directly protecting against external forces impacting the skull. The cushioning layer absorbs more impact energy than the shell, providing sufficient buffering against mechanical shocks. Function of wearing a helmet: In the event of a traffic accident, wearing a helmet means the tough outer shell can first directly resist external forces impacting the head, mitigating the instantaneous collision force. The inner cushioning layer further reduces the intensity and speed of the external forces acting on the skull while dispersing the force, thereby preventing damage to the brain.
12
5
Share

What is the reason for the seat belt not fastening?

Seat belt not fastening is due to damage to the seat belt buckle. Seat Belt: Seat belts have become a primary consideration for drivers and passengers, and one of the most important features in cars. Traditional components ensuring safe driving, such as rearview mirrors and side mirrors (traditional rearview systems), seat belts, AIRBAG (airbags), and ABS (anti-lock braking systems), are well-known to drivers and passengers and are commonly used in imported luxury vehicles. Function of Seat Belts: In the event of an emergency stop, seat belts can restrain the driver and passengers in their seats to prevent forward movement, thereby protecting them from secondary collisions and injuries.
14
4
Share

Can the Engine Still Run if the Connecting Rod is Broken?

Engine connecting rod broken cannot run. Main causes of engine connecting rod fracture: Water entering the engine cylinder (combustion chamber); continuous fuel injection by the engine; poor lubrication between the connecting rod and crankshaft leading to seizure; quality issues with the connecting rod itself; incorrect maintenance procedures or improper operation; damage to the crankcase system causing oil to flood the cylinder, among other reasons. Water entering the cylinder: When a vehicle is driven on roads with standing water, the engine may suck water into the cylinder. The water initially entering the cylinder quickly turns into vapor under the high temperature of the cylinder block, preventing the formation of a combustible mixture in that cylinder. As more water enters, it accumulates on top of the piston, reducing the effective volume of the combustion chamber and increasing compression resistance, thereby increasing the pressure transmitted from the piston to the connecting rod. When the amount of water reaches a certain level, the compression stroke essentially becomes the compression of water, causing the pressure on the connecting rod to increase sharply, leading to bending, deformation, and even fracture, potentially breaking the engine block.
1
3
Share

What Causes Engine Resonance for Over Ten Minutes When Cold?

Cold start vibration is mainly caused by carbon deposits, weak ignition, low cylinder pressure, substandard fuel, etc. Detailed causes: Excessive carbon deposits on throttle body, fuel injectors, and intake passages; When there's excessive carbon buildup inside the engine, gasoline sprayed by the cold start injectors gets largely absorbed by the deposits, resulting in an overly lean air-fuel mixture during cold starts that causes vibration; Mechanical failures in ignition coils, spark plugs, or fuel injectors leading to cylinder misfires; Insufficient fuel pressure or cylinder pressure causing power deficiency; Poor fuel quality; Damaged or excessively dirty idle control valve; Intake manifold leaks; Damaged engine mounts or cushion pads; Oxidized or low-grade engine oil with poor low-temperature fluidity, leading to inadequate cold start protection. Recommendation: It's advisable to visit a 4S shop or repair facility for inspection and maintenance to enhance the vehicle's safety performance.
20
3
Share

What Causes Poor Rebound in Motorcycle Suspension?

Poor rebound in motorcycle suspension is caused by a broken or overly soft suspension spring. Inverted Suspension: Inverted suspension provides greater support to the vehicle body, which is beneficial for extreme driving and cornering. In the event of a collision, due to its strong rigidity, the triple clamp or frame is more likely to deform, which is the opposite of conventional suspension. The spring is less likely to be damaged in a fall. The piston moves upward from below. Conventional Suspension: It is thinner at the top and thicker at the bottom, with the mechanical structure of the suspension located below. It has a relatively longer travel, a simple structure, and is less prone to oil leakage. In a frontal collision, the suspension usually deforms, while the triple clamp is less likely to be damaged. However, its performance in motion is average, and it has some impact on the rigidity of the vehicle body. The spring is more likely to be damaged in a fall. The piston moves downward from above. Motorcycle Suspension: The function of motorcycle suspension is to elastically connect the frame and the wheels, absorbing and mitigating the impact and vibrations from uneven road surfaces on the frame. If the suspension is too hard, the vehicle will vibrate severely, and the rider will constantly experience shocks. If it is too soft, the vibration frequency and amplitude will make the rider uncomfortable.
7
1
Share

Can OnStar start the engine without the key?

Yes. OnStar has a remote control function, which allows you to start the engine even without the key. Remote Start: After remotely starting the engine via OnStar, bring the key into the vehicle's sensing area, press the brake pedal, and press the start button. When the light turns green, you can drive away. OnStar is a comprehensive wireless service that utilizes wireless technology and GPS satellites, allowing users to connect with a customer service center with just one button and receive full voice assistance to resolve issues. Features of OnStar Remote Start: High reliability with significantly reduced failure rates; convenient usage, enabling remote engine start anytime and anywhere; full vehicle heating to minimize cold-start wear on the engine, effectively protecting the vehicle; easy installation.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.