···
Log in / Register

What Causes Engine Idle Shaking?

1 Answers
JayceLee
07/28/25 11:07am

Causes of idle shaking include severe engine carbon buildup, ignition system issues, unstable oil pressure, and aging engine components. The details are as follows: 1. Severe engine carbon buildup: Excessive carbon deposits in the engine can lead to poor engine performance, increased fuel consumption, and even difficulty starting. Over time, this can cause significant damage to the vehicle. The main causes of carbon buildup are poor driving habits, such as prolonged idling, aggressive acceleration and braking, low-quality fuel, driving at high gears with low speeds, and lack of regular maintenance. 2. Ignition system problems: When certain components or wiring in the car's ignition system experience open circuits, short circuits, insufficient primary current, low secondary voltage, or failed ignition timing adjustments, the engine may run unevenly. This results in poor acceleration, reduced power and fuel efficiency, and idle shaking. 3. Unstable oil pressure: Many factors can cause unstable engine oil pressure, such as insufficient oil, dirty oil, thinning oil, oil pipe leaks, oil pump damage, or excessive wear of its components. If the engine continues to operate under low oil pressure, severe cases may lead to "bearing seizure," making the engine unable to start and requiring bearing replacement or repair.

Was this review help?
2
1
Share
More Forum Discussions

Can You Still Drive When the Mercedes Collision Prevention System Stops?

You can still drive when the Mercedes collision prevention system stops, and it normally does not affect the vehicle's operation. The driver can restore normal function by turning off the engine and restarting it. Below is an introduction to the collision prevention system: Introduction to the Collision Warning System: The automotive collision warning system is primarily designed to assist drivers in avoiding major traffic accidents such as high-speed or low-speed rear-end collisions, unintentional lane departures at high speeds, and collisions with pedestrians. Like a third eye, it continuously monitors the road conditions ahead of the vehicle, identifies and assesses various potential hazards, and provides different auditory and visual alerts to help drivers avoid or mitigate collision accidents. Main functions include: Distance Monitoring and Warning—the system continuously monitors the distance to the vehicle ahead and provides three levels of distance monitoring alerts based on the proximity to the vehicle ahead; Lane Departure Warning—if the turn signal is not activated, the system generates a lane departure alert approximately 0.5 seconds before the vehicle crosses various lane markings; Forward Collision Warning—the system warns the driver of an impending collision with the vehicle ahead. When the time to collision with the vehicle ahead is within 2.7 seconds at the current speed, the system will produce audible and visual warnings.
18
3
Share

Do all Volkswagen 1.4T engines consume engine oil?

Volkswagen's EA211 1.4T engine does not typically burn engine oil. However, it is normal for some engine oil consumption to occur as long as it remains within the standard consumption limits. Excessive consumption would indicate an oil burning issue. Below is an introduction to engine oil burning: 1. The most important cause of oil burning: Poor quality engine oil. Low-quality oil fails to clean away dust from the air intake during engine operation and carbon deposits formed after combustion. If carbon deposits accumulate in the engine, they can lead to poor lubrication, increased wear, higher fuel consumption, reduced power output, and ultimately oil burning. 2. Factors affecting oil burning: Such as driving conditions, driving habits, maintenance practices, etc. These factors can accelerate oil consumption leading to oil burning, causing the following vehicle issues: Carbon deposits forming in the combustion chamber, causing the piston rings' compression rings to stick and resulting in poor sealing; Sludge forming in the lubrication system, clogging the oil control rings' return holes and weakening their oil-scraping performance; Wear occurring between the pistons and cylinder walls; Corrosion and aging of valve seals leading to sealing failure. Additionally, modern vehicles are equipped with a crankcase ventilation system (PCV valve), and if this malfunctions, it can also increase oil consumption.
16
5
Share

What is the tutorial for replacing the battery in a Mercedes-Benz C180 two-door coupe key?

Mercedes-Benz C180 two-door coupe key battery replacement tutorial is: 1. Slide the switch on the top of the key to pull out the mechanical spare key; 2. Insert the mechanical key into the slot on the other side and push it slightly to make the back cover pop open automatically, then remove the remote control back cover; 3. Take out the old key battery and replace it with a new one. Taking the 2013 Mercedes-Benz C180 as an example, it is a mid-size car with body dimensions of 4581mm in length, 1770mm in width, 1448mm in height, and a wheelbase of 2760mm. The 2013 Mercedes-Benz C180 is equipped with a 1.8T turbocharged engine, delivering a maximum horsepower of 156PS, a maximum torque of 250Nm, and a maximum power of 115kW, paired with a 7-speed automatic transmission.
18
3
Share

Is Porsche Owned by Volkswagen?

Porsche is a luxury automobile brand under the Volkswagen Group, also known as 'Porsche', and is one of the main representatives of European and American automobiles. The models under Porsche include: Porsche 911, Porsche 718, Porsche Macan, Porsche Panamera, Porsche Cayenne, etc. Taking the 2021 Porsche 718 as an example, its body dimensions are: length 4379mm, width 1801mm, height 1272mm. The 2021 Porsche 718 features MacPherson independent suspension both in the front and rear, equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 366PS, maximum torque of 430Nm, and maximum power of 269kW, paired with a 7-speed dual-clutch transmission.
5
4
Share

What causes the power steering failure in Mercedes-Benz C200L?

Mercedes-Benz C200L power steering failure reasons are as follows: Power steering pump failure: Lack of oil in the power steering pump, blocked oil passages, or air in the oil passages can all cause poor performance of the power steering pump. Solution: Check if the steering pump is working properly. If there is air, read the fault codes and bleed the air. Pressure loss or solenoid valve power failure: Due to dirty or leaking power steering fluid, oil pressure cannot be established. Solenoid valve circuit failure leads to no power supply. Solution: Replace the power steering fluid and check the solenoid valve's continuity. Poor connector contact: Poor contact in the control system wiring harness connectors, blown fuses, system fuse blown, relay damage, or failure of the controller, motor, or sensor can affect the electric power steering system.
2
0
Share

What are the precautions for roadside parking?

Precautions for roadside parking include: 1. Do not park in sections with no-parking signs or markings; 2. Do not park at intersections, railway crossings, sharp curves, narrow roads less than 4m wide, bridges, steep slopes, tunnels, or within 50m of these locations; 3. Do not open the door or allow passengers to enter/exit before the vehicle comes to a complete stop, and ensure door opening/closing does not obstruct other vehicles or pedestrians; 4. Turn off all electrical equipment before shutting off the engine to prevent battery drain from prolonged usage. The method for roadside parking is: 1. Check if there are time-limited parking signs—temporary parking is allowed where such signs exist; 2. Reduce speed, activate the right turn signal, and check the right-side rearview mirror for approaching vehicles or pedestrians; 3. After parking steadily by the roadside, engage the handbrake or press the parking button; 4. At night, turn on the hazard warning lights.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.