What Causes Disc Brake Lock-Up Without Rebound?

What Causes the Yellow Exclamation Mark in Honda Cars?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard with exclamation marks, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed explanation of the exclamation mark warning lights: General Faults: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common causes include parking sensor faults, fuel cutoff system intervention or faults, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a transmission fault or transmission fluid level below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: An exclamation mark inside a circle with parentheses. This represents a brake system warning, mainly indicating a brake system fault or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Abnormality: An exclamation mark with a horizontal line below parentheses. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a fault in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or check yourself by focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. In addition, during daily vehicle use, the fault lights displayed on the dashboard are divided into two colors: yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the nearest repair point to eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. If this occurs, do not continue driving. Pull over immediately and call for professional assistance to prevent unpredictable risks to the vehicle and personal safety. It is important to note that when the car is started, all lights will illuminate as the system performs an automatic check. After the check is completed, the lights will turn off automatically. If a light does not illuminate when the ignition is turned on, remains lit, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional assistance promptly to inspect and eliminate potential safety hazards.

13

5

Share

Where is the air conditioning pressure sensor located on the Audi A6?

The air conditioning pressure sensor on the Audi A6 is located in the engine compartment. Below are the relevant details: 1. Interior temperature sensor: Typically installed under the instrument panel, this is a negative temperature coefficient (NTC) thermistor-type temperature sensor that provides cabin temperature signals to the air conditioning electronic control unit. 2. Ambient temperature sensor: This is also an NTC thermistor-type temperature sensor, usually installed on the lower side of the front bumper, which provides external temperature signals to the air conditioning electronic control unit.

15

4

Share

Can I Take the Subject 1 Test After 10 Days of Registration?

After successfully registering at a driving school, you can schedule the Subject 1 test in about 10 days. Before scheduling, you should review the Subject 1 study materials and practice test questions. Driving school registration is only a preliminary step. After registration, the driving school submits your information to the Vehicle Management Office (VMO). Upon approval, the VMO will issue a serial number, indicating successful registration, after which you can schedule the Subject 1 test. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the Subject 1 test consists of 100 multiple-choice and true/false questions, each worth 1 point. If you answer 11 questions incorrectly during the test, the system will automatically submit the exam and end the test. Subject 1 Test Content: Regulations on driving licenses and motor vehicle management; road traffic conditions and regulations; traffic safety violations and penalties; regulations on road traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 Test Notes: During the test, students should dress appropriately—no slippers are allowed. Electronic devices and bags are prohibited in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen, and store personal belongings in a locker before entering the exam room. Upon entering, verify your identity at the assigned station, locate your seat, and begin the test. Ensure the camera is aligned with you and follow exam rules. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it—unsigned reports are invalid. There is no limit to the number of times you can schedule the Subject 1 test. Each subject allows one exam attempt, with one retake if you fail. If you skip the retake or fail it, the exam process ends, and you must reschedule. In contrast, Subject 2 and Subject 3 allow only five exam attempts each, with scheduling permitted after ten days. If you fail the Subject 3 safe driving knowledge test, your previously passed road driving skills test results remain valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 covers traffic safety laws, regulations, and related knowledge. Subject 2 assesses field driving skills. Subject 3 includes two components: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4, though this term is not officially recognized in the regulations (i.e., the Ministry of Public Security Order No. 123).

3

2

Share

Which Came First, Cars or Traffic Lights?

Traffic lights actually predate automobiles in world history. Here is relevant information about traffic lights: 1. Traffic Lights: Also known as Traffic Signal Lights, they are indicators that regulate vehicle and pedestrian movement. 2. Locations: Typically installed at intersections and other areas requiring traffic control, they generally consist of red, green, and yellow lights - red indicating stop, green indicating go, and yellow serving as a warning. 3. Categories: Common types include motor vehicle signals, non-motor vehicle signals, pedestrian crossing signals, directional indicators (arrow signals), and flashing warning signals.

11

0

Share

What Brand is the Five-Pointed Star?

The five-pointed star logo represents Venucia and JAC Motors. The Venucia emblem features four small stars surrounding a larger star, with the blue color inside the logo symbolizing dreams, representing Venucia's down-to-earth approach. Relevant information is as follows: 1. Logo: The JAC Motors emblem has an outer elliptical shape symbolizing the Earth, indicating that JAC Motors creates world-class vehicles by integrating global resources to achieve global operations. 2. Dimensions: The Venucia D60 measures 4756mm in length, 1803mm in width, and 1487mm in height, with a wheelbase of 2700mm. It is a 4-door, 5-seater sedan with a 5-speed manual transmission and a top speed of 180 km/h.

10

0

Share

What is the difference between Camry A25A and A25C?

The differences between Camry A25A and A25C are: 1. Version difference: A25A represents Toyota's TNGA 2.5L engine, which is originally imported from Japan, while the A25C engine is the domestically produced version. 2. Assembly difference: A25A is the complete engine assembly imported from Japan, fully assembled in Japan before being shipped over, whereas A25C involves importing all necessary engine parts from Japan and assembling them at GAC Group's factory. 3. Performance of A25A or A25C: Both A25A and A25C engines feature new technology that allows free switching between the Otto cycle and Atkinson cycle systems, giving this internal combustion engine a compression ratio of 13:1.

16

2

Share

What Causes Disc Brake Lock-Up Without Rebound?

What Causes the Yellow Exclamation Mark in Honda Cars?

Where is the air conditioning pressure sensor located on the Audi A6?

Can I Take the Subject 1 Test After 10 Days of Registration?

Which Came First, Cars or Traffic Lights?

What Brand is the Five-Pointed Star?

What is the difference between Camry A25A and A25C?

What does it mean when the eco light in a car is on?

What does ABS on the car dashboard mean?

Does changing tires include the rims?

What does D+- mean in automatic transmission and how to switch it?