What Causes Difficulty in Engaging Reverse Gear?

1 Answers
VanRachel
07/25/25 1:14pm
Difficulty in engaging reverse gear can be attributed to the following reasons: Low vehicle temperature: When the vehicle is cold, the transmission oil has not fully lubricated the system. Mismatch between speed and gear: Difficulty in shifting into first gear while moving indicates a mismatch between vehicle speed and gear selection. Absence of synchronizer for first and reverse gears: First gear and reverse gear lack synchronizers. Solutions for difficulty in engaging reverse gear: Attempt to engage reverse gear when stationary: It is recommended to try engaging reverse gear when the vehicle is completely stationary. If the transmission produces a "clunking" sound during the process, it indicates incomplete clutch disengagement. The issue can be resolved after repairing the clutch. Difficulty in engaging first gear: If reverse gear engages smoothly but first gear is problematic, it is advisable to visit a specialized repair shop to adjust the gear shift position and replace the transmission oil, which should resolve the issue.
Was this review help?
15
3
Share
More Forum Discussions

How Many Days in Advance Can Vehicle Owners Renew Their Driver's License?

You can apply for a license renewal at the vehicle management office up to 90 days before your driver's license expires. The consequences of failing to renew an expired driver's license are as follows: 1. If the license has been expired for less than one year: As long as the holder renews it promptly, there will be no issues. 2. If the license has been expired for more than one year but less than three years: The license will be in a "revocable but recoverable" status, and the holder must apply at the vehicle management office to take the Theory Test (Subject One). The license can only be retrieved after passing the exam. 3. If the license has been expired for three years or more: The license will be permanently revoked, and the holder must re-enroll in a driving school and retake all exams to obtain a new license.
20
1
Share

Can a Vehicle Have Two Vehicle Licenses?

It is procedurally feasible to obtain an additional vehicle license. At the vehicle management office, one can claim the loss of the original license to acquire a duplicate. However, this practice is illegal and not advisable. Below is more relevant information about vehicle licenses: 1. The vehicle license bears an annual inspection seal (social vehicles require annual inspection, while private vehicles are inspected every two years for the first six years). Upon expiration, one of the licenses will become invalid. 2. This act is illegal. If a stolen vehicle is traced back to having a license, the truth will come to light, and the loss cannot be calculated at just 5%. The consequences are imaginable.
11
3
Share

What maintenance items are required for a car at 45,000 kilometers?

For a car at 45,000 kilometers, the routine maintenance includes changing the engine oil and oil filter, replacing the air filter, cabin air filter, and fuel filter—essentially replacing all three filters. Additionally, a comprehensive inspection and cleaning of the entire vehicle should be performed. The most critical aspects of car maintenance are changing the engine oil and oil filter, washing the car, and regularly checking the tire tread and pressure, oil level, coolant level, and brake fluid level. Below are five key points for engine maintenance: Maintenance points: Use the appropriate grade of engine oil and change it regularly (every 5,000 kilometers) along with the filter. Maintain the air cleaner frequently and replace it periodically (every 20,000 kilometers). Clean the fuel system regularly and replace the fuel filter (every 30,000 kilometers). Service the radiator cooling mesh periodically (every 30,000 kilometers). Replace the spark plugs (every 40,000 kilometers or based on driving conditions).
17
3
Share

Is it safe to drive with a tire pressure of 172?

When the tire pressure is 172, it is not safe to continue driving because low tire pressure increases tire movement, generates excessive friction leading to temperature rise, softens the tire, and reduces its strength. Prolonged high-speed driving under such conditions may result in a tire blowout. Relevant information about tire pressure is as follows: Normal tire pressure range: The ideal tire pressure ranges between 2.3 to 2.7 BAR. However, during summer when temperatures are high, tire pressure may rise above 3.0 BAR after driving. Therefore, maintaining tire pressure between 2.3 to 2.5 BAR in summer is more appropriate. Consequences of low tire pressure: Increases friction coefficient with the road surface, leading to higher fuel consumption; causes steering wheel heaviness and potential alignment issues, compromising driving safety; excessive tire movement leads to abnormal heat generation; friction with the ground multiplies, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength, which can cause a blowout during high-speed driving; low pressure increases tire deformation, leading to sidewall cracks, flexing movements, excessive heat, rubber degradation, fabric layer fatigue, cord breakage, and increases the tire's contact area, accelerating shoulder wear.
19
3
Share

What Do the Dashboard Lights Mean?

Here is an introduction to the dashboard lights: 1. The commonly seen left and right arrows indicate turn signals. 2. Electric power steering and collision warning system indicator lights. 3. Passenger seat belt must be fastened indicator. 4. Seat belt warning light, oil-related warning, and brake system warning. 5. Key detection failure indicator. 6. Power battery fault alarm indicator. 7. ABC system error requires special attention. 8. The engine oil indicator has different colors: red and yellow. If it's red, immediate inspection is required. 9. A lightning bolt symbol represents electronic throttle control system malfunction.
18
0
Share

What Issues Should Be Noted When Driving on Highways?

When driving on highways, the following issues should be noted: 1. Drive within the designated lanes: Vehicles on highways must adhere to traffic regulations, with different vehicle types staying in their respective lanes. For example, large buses and trucks should drive in the right lane, while small passenger vehicles should stay in the middle lane. Avoid driving in lanes not designated for your vehicle type for extended periods unless under special circumstances. 2. Fasten seat belts: Both the driver and front-seat passenger must wear seat belts throughout the entire journey on the highway. Do not unfasten them midway, and never skip wearing them out of complacency, as the consequences in case of danger could be severe. 3. Stay focused while driving: On highways, avoid making phone calls, looking at your phone, or using headphones to listen to recordings, as this may prevent you from hearing other vehicles' horns, leading to hazards. Also, refrain from throwing items out of the car to avoid affecting other vehicles or causing accidents. 4. Adhere to speed limits: When entering the highway, accelerate to at least 50 km/h as soon as possible. Speed up from the ramp to the acceleration lane before merging into the main lane, ensuring you do not obstruct other vehicles already in the main lane. During normal driving, do not exceed the maximum or minimum speed limits to prevent accidents. 5. Avoid unnecessary lane changes: Do not change lanes arbitrarily on highways. If overtaking is necessary, signal in advance and only overtake in the adjacent lane. Do not overtake multiple vehicles consecutively, and return to your original lane promptly after overtaking. Avoid driving on lane markings. 6. Avoid sudden steering: Always hold the steering wheel with both hands to maintain control. Avoid the bad habit of driving with one hand, as strong winds or adverse weather conditions may make steering difficult, potentially leading to accidents. 7. Never reverse or drive against traffic on highways: If you miss an exit, proceed to the next one. Do not attempt to turn around by crossing the median or reversing, as this could cause severe hazards. 8. Maintain a safe distance from other vehicles: Generally, determine the following distance based on your speed, referring to roadside distance markers. While keeping a safe distance from the vehicle ahead, also monitor the vehicle behind you. In case of emergency braking, always check the distance of the rear vehicle to prevent collisions.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.