What Causes Cracks on the Sidewall of Car Tires?

1 Answers
MacSawyer
07/30/25 12:02am
The reasons for cracks on the sidewall of car tires are: 1. Natural aging of the tire; 2. Impact damage to the tire. Precautions for using car tires include: 1. When inflating tires, reduce the tire temperature to normal levels to avoid affecting pressure judgment; 2. Inflate to around 2.5bar; 3. Regularly check the wear level of car tires; 4. Avoid exposing tires to high temperatures. The extent to which tire cracks require replacement is: 1. Cracks appear on the tire sidewall; 2. Cracks are too long or deep, reaching the standard tread depth of 1.6mm; 3. Tire bulging occurs; 4. Wavy cracks on the tire surface; 5. Obvious scratches or punctures on the tire surface.
Was this review help?
14
5
Share
More Forum Discussions

What size is the tire wrench for the 2010 BYD F3?

The tire wrench for the 2010 BYD F3 is size 19, and it is installed under the partition in the car's trunk. The functions of the tires are: 1. To prevent severe vibrations and early damage to car components, adapt to the vehicle's high-speed performance, and reduce noise during driving; 2. To support the entire weight of the vehicle, withstand the car's load, and transmit forces and moments in other directions. The 2010 BYD F3 is a compact car with body dimensions of 4533 mm in length, 1705 mm in width, and 1490 mm in height. The engine of the 2010 BYD F3 has a maximum power of 80.0 kW, a maximum horsepower of 109, and a maximum torque of 145.0 Nm.
8
4
Share

What is the minimum engine displacement for motorcycles to ride on highways?

Motorcycles with a 50cc engine displacement can ride on highways. Displacement refers to the volume of fluid inhaled or discharged per stroke or cycle, serving as a crucial parameter for measuring a vehicle's performance. It is usually marked on the body or rear of the vehicle. Generally, the larger the displacement, the more energy the engine releases per unit of time. The correct gear-shifting method for motorcycles is: 1. Before shifting, twist the throttle to increase its opening degree, ensuring the engine has sufficient power to maintain speed during gear changes; 2. After slightly increasing the throttle, quickly close it; 3. Use the left hand to firmly grip the clutch lever, disengaging the clutch in preparation for shifting; 4. Step on the foot shift lever to shift to a higher gear; 5. Gradually release the clutch lever; 6. Promptly twist the throttle grip backward to reopen the closed throttle.
4
0
Share

How Many Years Until a Motorcycle is Scrapped?

Motorcycles must be mandatorily scrapped after 13 years of service. Generally, motorcycles are subject to compulsory scrapping after 8-10 years of use (with slight regional variations), and those in good condition may have their service life extended by up to three years. Introduction to Vehicle Scrapping Period: The vehicle scrapping period refers to a safety inspection system based on the number of seats and the duration of use for vehicles. According to regulations, small and micro non-operational passenger vehicles, large non-operational cars, and wheeled special-purpose machinery vehicles have no usage time limit. Introduction to New Scrapping Standards: Vehicles must be scrapped if they reach the prescribed service life; if they still fail to meet the national safety technical standards for in-use vehicles after repair and adjustment; if they continue to emit pollutants or noise that do not comply with national standards for in-use vehicles after repair, adjustment, or the application of control technology; or if they fail to obtain the mandatory inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection validity period.
12
0
Share

What to do about severe rear tire wear on the Haima S5?

The solutions for severe rear tire wear on the Haima S5 are: 1. Perform a four-wheel alignment; 2. Replace the tires. The maintenance methods for tires include: 1. Regularly check tire pressure to ensure it is neither too high nor too low; 2. Frequently remove debris from tire treads to avoid blowouts; 3. Inspect tire wear and replace them promptly based on wear conditions. The Haima S5 is a compact SUV launched by Haima Motors. Taking the 2019 Haima S5 manual elite model as an example, its body dimensions are: length 4418 mm, width 1823 mm, height 1630 mm, with a wheelbase of 2630 mm.
20
5
Share

What are the types of exhaust valves?

There are various types of exhaust valves, including single-port exhaust valves, double-port exhaust valves, composite exhaust valves, and high-speed exhaust valves. Single-port exhaust valve: The single-port exhaust valve (exhaust valve) is used in independent heating systems, central heating systems, heating boilers, central air conditioning, floor heating, and solar heating systems for pipeline exhaust. Since water usually contains a certain amount of dissolved air, and the solubility of air decreases as the temperature rises, gas gradually separates from the water during circulation and accumulates to form large bubbles or even gas columns. Due to the continuous replenishment of water, gas is frequently generated. Double-port exhaust valve: The double-port exhaust valve is suitable for water pipelines as a device to remove gas from the pipeline, improving the efficiency of water delivery equipment and protecting the pipeline from deformation or rupture. It is an essential device for pipelines. High-speed exhaust valve: The high-speed double-port exhaust valve is the most advanced cylinder-type exhaust valve in China, surpassing ordinary high-speed (double-port) exhaust valves and composite double-port exhaust valves in structural performance. It can continuously and rapidly exhaust gas from pipelines, whether in multi-segment water columns, gas columns, or under pressure or no pressure. The float ball does not press against the exhaust port, eliminating the risk of jamming or damage.
13
3
Share

What brand is the car with the R logo?

The car with the R logo is Rolls-Royce. Models under Rolls-Royce include: Phantom, Cullinan, Ghost, Wraith, and Dawn. Taking the 2018 Dawn as an example, its body dimensions are: length 5295mm, width 1947mm, height 1506mm, with a wheelbase of 3112mm and a fuel tank capacity of 82 liters. The 2018 Dawn is equipped with a 6.6T twin-turbocharged engine, with a maximum power of 420kW and a maximum torque of 820Nm, paired with an 8-speed automatic transmission. The front suspension uses a double-wishbone independent suspension, and the rear suspension uses a multi-link independent suspension.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.