What Causes Continuous Tire Pressure Alarm?

2 Answers
Zane
09/03/25 5:48am
Common reasons for frequent tire pressure alarms include: 1. Tire replacement without resetting the tire pressure module; 2. Nail punctures causing changes in tire pressure; 3. Inflating tires without resetting the tire pressure monitoring system; 4. Prolonged vehicle inactivity leading to decreased tire pressure due to lack of inflation. The method to reset the tire pressure monitoring system is: 1. Ensure the vehicle's tire pressure is within the normal range; 2. Park the vehicle on a flat surface and turn off the engine; 3. Power on the vehicle and hold down the tire pressure monitoring button; 4. After 5 seconds, an alarm sound will be heard, and releasing the button indicates a successful reset. The functions of tire pressure monitoring are: 1. Immediate alarm in case of rapid or slow air leakage when a tire is punctured; 2. Alert when tire loosening causes unbalanced friction, leading to high temperatures (up to 70°C) to prevent blowouts; 3. Warning when tire pressure falls below the vehicle's set limit due to prolonged lack of inflation, preventing low pressure from causing tire temperature rise and blowouts.
Was this review help?
2
3
Share
McQuinn
09/15/25 7:16am
I find that the tire pressure warning frequently goes off, and the most common reason is a tire leak. The tire might have been punctured by a nail or debris, causing a slow leak and insufficient pressure; or the weather might have turned colder, causing the tire pressure to drop naturally and triggering a false alarm. Another possibility is a sensor malfunction, such as a dead battery in the sensor, poor wire contact, or a system calibration error. As a seasoned long-distance driver, I've encountered this many times. Whenever the alarm sounds, I immediately pull over and manually check each tire's pressure with a portable gauge—usually, the front tires are more prone to issues. Safety should never be overlooked, as low tire pressure can increase the risk of a blowout and fuel consumption. If something happens on the highway, it might be too late. My advice is to first go to a gas station to inflate and check the tires when the alarm goes off. If the problem persists, visit a repair shop to inspect the sensors and tire sealing—don’t delay to avoid potential hazards.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

What is a Limited Slip Differential?

Limited Slip Differential is an improved type of differential that restricts wheel slip. Below is relevant information about Limited Slip Differentials. 1, Definition of Limited Slip Differential: It refers to a type of differential that allows the speed difference between the two drive wheels within a certain range to ensure normal driving performance such as turning. 2, Types of Limited Slip Differentials: helical gear, ball lock, viscous coupling, mechanical, active, and eccentric wheel types. 3, Disadvantages of Limited Slip Differentials: In drive wheels equipped with differentials, when one wheel encounters greater external resistance than the other, the differential will allocate more power to the wheel with less resistance. This is why cars often get stuck in mud, with wheels spinning and sinking deeper.
18
2
Share

What is the urban fuel consumption of the Changan CS35?

Changan CS35 urban fuel consumption is 6.1 liters per 100 kilometers. Here is an introduction about the Changan CS35: 1. Highlights: Superior airbag technology, comprehensive safety protection: oversized side curtain airbags with 100% window coverage and anti-rollover design; rapid deployment within 0.03 seconds, millisecond-level response for timely protection; 6 airbags, creating an all-around safety barrier; equipped with Bosch's latest-generation airbag controller and 4 airbag sensors, significantly improving safety. 2. Key events: In August 2019, the CS75PLUS pre-sale and global media test drive event crossed 7 major cities, covering a total distance of 1,975 kilometers. Within 19 days of pre-sale, total orders reached 11,729 units.
18
5
Share

How to Turn on the External Circulation in the New Bora?

On the car's air conditioning control panel, there is a button for switching between internal and external circulation modes. Press this button to toggle between the internal circulation mode and the external circulation mode. Here are the highlights of this car: 1. Engine: The Bora is a compact sedan under the Volkswagen brand, equipped with two types of engines: a 1.4-liter turbocharged engine and a 1.5-liter naturally aspirated engine. The 1.4-liter turbocharged engine delivers 150 horsepower and a maximum torque of 250 Nm. The engine's maximum power is achieved at 5000 to 6000 rpm, and the maximum torque is available from 1750 to 3000 rpm. 2. Fuel Consumption: It has very low fuel consumption and is highly fuel-efficient.
5
0
Share

What is the Difference Between Gear Drive and Belt Drive?

Gear drive and belt drive differ in their transmission methods: gear drive transmits power through the meshing of gears, where the driving and driven gears rotate in opposite directions; belt drive transmits power through friction, with the driving and driven pulleys rotating in the same direction. The working principle of the driving force control system is: 1. Based on the vehicle's driving conditions, appropriate control algorithms are used to keep the slip rate of the driving wheels as close to the normal value as possible; 2. Under harsh road conditions or complex driving scenarios, the system maximizes the utilization of the engine's driving torque to ensure rapid and stable vehicle starting and acceleration.
16
1
Share

What is the method to look up a vehicle by its license plate number?

According to the license plate number, the method to look up a vehicle is: 1. Go online and click to enter the online vehicle management office, then click to enter the motor vehicle information inquiry; 2. Input the type and number of the motor vehicle license plate you need to inquire, and click search; 3. Determine the vehicle you need to inquire through relevant information such as body color, vehicle brand, driver, and file number. The steps to install the license plate are: 1. You need to screw all the fixing screw components onto the fixing points where the front and rear of the vehicle can see the fixed license plate; 2. After the license plate is in the right position, tighten all the screws; 3. Align the cap with the cushion block and press it down, then press the cap into place to fix it.
4
3
Share

What is the sign of a malfunctioning anti-lock braking system?

The sign of a malfunctioning anti-lock braking system is the display of 'ABS'. The functions of the anti-lock braking system are: 1. To prevent loss of vehicle control, increase braking distance, and improve vehicle safety; 2. To enhance the overall braking performance of the vehicle; 3. To prevent wheel lock-up during braking; 4. To ensure the driver can control the direction during braking and prevent rear axle skidding. The working principle of the anti-lock braking system is: during emergency braking, relying on highly sensitive wheel speed sensors installed on each wheel, the system detects wheel lock-up. The computer immediately controls the pressure regulator to release pressure from the wheel's brake caliper, allowing the wheel to resume rotation, thereby achieving the purpose of preventing wheel lock-up.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.