What Causes Chassis Noise When Driving Over Bumpy Roads?

How to Solve P1101 Trouble Code?

p1101 trouble code causes and solutions are mainly the following, respectively introduced as follows: 1. Cause: It may be incorrect intake air flow. 2. Solution: Need to replace the mass air flow sensor. Here are some other content introductions: 1. Introduction: The mass air flow sensor, also known as air flow meter, is one of the important sensors for electronic fuel injection engines. 2. Function: It converts the inhaled air flow into electrical signals and sends them to the electronic control unit (ECU), serving as one of the basic signals for fuel injection determination. It is the sensor that measures the air flow inhaled by the engine.

3

1

Share

What does remote parking mean?

Remote parking refers to the function that allows the car owner to remotely start the vehicle and control its forward/backward movement as well as steering left or right within a range of approximately 10 meters using a remote control similar to a slide phone. Models equipped with this feature include the BMW 7 Series and BYD Qin. The remote parking function mainly includes three types: remote entry/exit, remote parking in, and remote parking out. Here are the detailed introductions: 1. Entry/Exit: When parking, the driver can stop the car in front of the parking space and then use the remote control to maneuver the vehicle into the space after getting out. When retrieving the car, the driver can start the engine and activate the remote parking system from outside the vehicle using the remote control, then control the vehicle to exit the parking space. This function is suitable for narrow vertical parking spaces or scenarios where it's difficult to open car doors. 2. Remote Parking In: The driver can first activate the remote parking system inside the vehicle, search for and confirm the target parking space, then shift to P gear, engage the EPB, and exit the vehicle. The remote control can then be used outside the car to complete the parking process. This function is generally suitable for parallel, vertical, and inclined parking spaces. 3. Remote Parking Out: The driver can first start the engine and activate the remote parking system from outside the vehicle using the remote control, then continue to issue parking-out commands, allowing the remote parking system to control the vehicle's exit. This function is generally suitable for parallel parking spaces.

5

4

Share

Are New Energy Vehicles Charged Highway Tolls?

New energy vehicles are required to pay highway tolls. Both new energy electric vehicles and conventional fuel-powered vehicles are subject to toll charges. Electric vehicles that are legally registered and licensed are permitted to drive on highways, while low-speed electric vehicles (such as elderly mobility scooters) and unregistered electric vehicles are not allowed. Additional Information: Below are some considerations for new energy vehicles when driving on highways: 1. Monitor Battery Level: Since electric vehicles rely solely on battery power during operation, it is essential to pay attention to the remaining range before entering a highway to avoid running out of power midway. If the battery level is insufficient, drivers can recharge at the nearest rest stop. It is advisable to familiarize oneself with the locations of charging stations along the route before setting out. 2. Pay Attention to Load: Similar to fuel-powered vehicles, excessive load in an electric vehicle will require more power during driving, leading to reduced range.

8

3

Share

What are the five major signs before a car tire blowout?

Five major signs before a car tire blowout are as follows: 1. Tire sidewall cracks: Not all issues with tires are concentrated on the tread; the sidewalls can also develop problems. By inspecting the sidewalls for visible cracks and cuts, these small grooves can indicate potential future air leaks or even worse, tire blowouts. These tire failures should be avoided at all costs. 2. Tread wear indicator bars: Tread wear indicator bars are flat rubber strips embedded perpendicularly along the tread grooves. If you notice one or two of these bars during inspection, it means the tread depth has significantly reduced. Extra caution is needed when driving on wet or slippery roads. If almost all the indicator bars are visible, it's time to replace the tires as soon as possible. 3. Excessive vibration and shaking: Vehicle shaking can be caused by various factors, such as tire misalignment, imbalance, or issues with the shock absorbers. However, shaking can also indicate internal tire problems. Even if the tires aren't the root cause, prolonged shaking can degrade tire performance and lead to tire issues soon after. 4. Tread depth: The tread depth should always be greater than 1.6 mm. If you frequently drive on low-traction wet roads, it's best to maintain a tread depth at least twice this value. A tread depth gauge can be used to measure this accurately. 5. Bulges and blisters on the tire: In some cases, the outer surface of the tire may develop bulges or blisters due to insufficient strength, similar to an aneurysm in a blood vessel. If the vehicle isn't taken to a repair shop promptly, these weak spots can lead to sudden tire blowouts.

17

0

Share

What is Sheet Metal Repair?

Automotive sheet metal is a technical method of car repair. In this context, automotive sheet metal is equivalent to automotive sheet metal repair, which refers to the process of restoring the car body after a collision. This includes all tasks except for the anti-corrosion and decorative painting work on the car body. Examples include analyzing car body damage, measuring the car body, shaping the sheet metal, stretch correction, stress-relief welding, as well as assembling and adjusting car body accessories. Here are situations where sheet metal repair is required: 1. Impact-induced dents: Impact-induced dents require sheet metal repair. Dents in sheet metal parts can be repaired using hammering or pulling methods. Different approaches are used depending on the specific situation. Of course, the process varies based on the severity of the dent, and the material of the car body must also be considered. 2. Warping or skew deformation: Methods for repairing warped or skewed sheet metal parts. Sheet metal parts may become warped or skewed due to impacts, scratches, or improper use. These deformations can be corrected using mechanical methods or flame heating and hammering techniques. 3. Cracks or punctures: Methods for repairing cracks or punctures in sheet metal parts. For surfaces damaged by impact or punctures, adhesive patch repairs can be used. Common adhesives currently in use include epoxy resin glue, phenolic resin glue, and copper oxide adhesives. 4. Cracks or severe local damage: For these two scenarios, traditional car repairs would involve welding or repair methods. However, 4S shops nowadays typically opt for direct replacement.

9

4

Share

What is the general composition of a wheeled vehicle's running system?

The running system of a wheeled vehicle is generally composed of the frame, axle, wheels, and suspension. Below is a detailed introduction to the running system of wheeled vehicles: 1. Frame: The frame is a bridge-like structure that connects various axles and serves as the installation foundation for the entire vehicle. Its function is to mount the vehicle's assemblies and components, ensuring they maintain correct relative positions, and to withstand various static and dynamic loads from the vehicle and the ground. 2. Axle: The axle transmits forces in all directions between the frame (or the load-bearing body) and the wheels. Axles are categorized into four types: steering axle, drive axle, steering drive axle, and support axle. The steering axle allows the front wheels to pivot at certain angles for steering, while also bearing vertical loads, longitudinal and lateral forces from road conditions and braking, and the moments generated by these forces. 3. Wheels: Wheels are rotating components with tires mounted externally and axles at the center, designed to bear loads. They consist of the hub, rim, and spokes. Wheels are mainly divided into disc-type and spoke-type. Their functions include supporting the total mass of the vehicle and cargo; ensuring good adhesion between the wheels and the road surface to enhance traction, braking, and off-road capability; working with the vehicle suspension to reduce impacts during driving and mitigate resulting vibrations, ensuring a comfortable and smooth ride. 4. Suspension: The vehicle suspension refers to all power-transmitting connecting devices between the frame and the axle. It elastically connects the axle to the body, cushioning impacts from uneven road surfaces to ensure passenger comfort and cargo safety; quickly dampening vibrations caused by the elastic system; transmitting vertical, longitudinal, and lateral reaction forces and their moments; and guiding the wheels to move along a specific trajectory relative to the body.

11

2

Share

What Causes Chassis Noise When Driving Over Bumpy Roads?

How to Solve P1101 Trouble Code?

What does remote parking mean?

Are New Energy Vehicles Charged Highway Tolls?

What are the five major signs before a car tire blowout?

What is Sheet Metal Repair?

What is the general composition of a wheeled vehicle's running system?

Are Hybrid Vehicles Issued Blue or Green License Plates?

How often should a sedan be inspected after 6 years?

What are the 6 warning signs before a car catches fire?

Principles and Techniques for Reversing Semi-Trailers and Towing Trailers