What Causes Car Vibration When Driving?

What is the Function of Shock Absorbers?

The function of shock absorbers is to suppress the oscillations caused by the rebound of springs after absorbing shocks and the impacts from the road surface. When driving on uneven roads, although the shock-absorbing springs can filter out the vibrations from the road, the springs themselves still undergo reciprocating motion. Shock absorbers are used to suppress this spring bouncing. If the shock absorbers are too soft, the vehicle body will bounce up and down; if they are too hard, they will create excessive resistance, hindering the normal operation of the springs. During the modification of the suspension system, stiff shock absorbers should be paired with stiff springs. The stiffness of the springs is closely related to the vehicle weight, so heavier vehicles generally use stiffer shock absorbers.

16

1

Share

How to Use the Cruise Control in the Reiz?

How to use the cruise control in the Reiz: 1. The cruise control switch is located on the cruise control lever at the lower right of the steering wheel; 2. Push it to the left to turn on the cruise control, and the green cruise indicator light on the dashboard will illuminate; 3. When the vehicle speed reaches the desired speed between 40 and 140 km/h, operate the cruise control lever downward (set), and the current speed will be set. The Reiz is the domestic name for the Japanese Toyota MARKX model, a mid-size car under FAW Toyota. In terms of body dimensions, it measures 4750mm in length, 1795mm in width, 1450mm in height, with a wheelbase of 2850mm.

10

5

Share

What Causes the Car to Stall When the Clutch is Depressed?

The reason why the car stalls when the clutch is depressed: It may be that after the clutch is fully depressed, the clutch does not disengage, making it easier to stall. The clutch cable or clutch disc should be replaced immediately. The clutch is the medium that transmits engine power to the gearbox. Its assembly includes the clutch plate, clutch pressure plate, release sleeve, release bearing, return spring, clutch cable, clutch release fork, etc. The clutch is located in the flywheel housing between the engine and the gearbox. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the gearbox. During driving, the driver can depress or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the gearbox, thereby cutting off or transmitting the power input from the engine to the gearbox.

2

0

Share

What are the reasons for high water temperature in a car?

The reasons for high water temperature in a car are: 1. Coolant leakage or insufficient coolant can cause the engine water temperature to rise; 2. When the vehicle is running at high speed, the heat generated cannot be transferred to the antifreeze in time, affecting heat dissipation; 3. The impeller cracking or loosening from the pump shaft slows down the coolant circulation speed; 4. Thermostat failure; 5. Long-term use of water as a medium leads to rust formation in the engine and radiator, resulting in poor radiator heat dissipation. When the car's water temperature is too high, avoid shutting off the engine immediately. Keep the engine idling for a while, turn on the air conditioning heater to assist in heat dissipation, and open the engine hood to help dissipate heat. Only shut off the engine after the coolant temperature drops to the normal range.

16

1

Share

How to Turn Off the Rear Wiper of FAW-Volkswagen Tayron?

The method to turn off the rear wiper of FAW-Volkswagen Tayron: Lift the wiper lever upward to turn it off, and press it downward to turn it on. The Tayron is a premium German mid-size SUV with dimensions of 4595 mm in length, 1860 mm in width, and 1660 mm in height, and a wheelbase of 2731 mm. In terms of interior design, the Tayron features a wraparound cockpit design that complements its rugged exterior, enhanced by multiple geometric cutting and folding line designs, further emphasizing a sense of strength. The Floating design of the center console is simple and elegant, with a clear functional layout and detailed designs that add a premium feel. For the suspension system, the Tayron is equipped with a MacPherson strut front suspension and a multi-link rear suspension.

9

1

Share

What transmission does the Geely Emgrand use?

Geely Emgrand is equipped with two types of transmissions, one is a 5-speed manual transmission (MT), and the other is a continuously variable transmission (CVT). Below are the relevant details about the Geely Emgrand: Dimensions: The Geely Emgrand is a compact car with a body length of 4632mm, width of 1789mm, height of 1470mm, and a wheelbase of 2650mm. Powertrain: The car is equipped with a 1.5-liter naturally aspirated engine, delivering a maximum power of 80kw and a maximum torque of 142nm. It features an aluminum alloy cylinder head and block, with multi-point electronic fuel injection. The front suspension of the Geely Emgrand is a MacPherson independent suspension, while the rear suspension is a torsion beam non-independent suspension.

8

4

Share

What Causes Car Vibration When Driving?

What is the Function of Shock Absorbers?

How to Use the Cruise Control in the Reiz?

What Causes the Car to Stall When the Clutch is Depressed?

What are the reasons for high water temperature in a car?

How to Turn Off the Rear Wiper of FAW-Volkswagen Tayron?

What transmission does the Geely Emgrand use?

How Often Should the Car Fuel Filter Be Replaced?

What is a smart car?

What does the white 80 road marking mean?

What does the Subject 2 simulator mean?