What Causes Car Shaking During Hard Acceleration?

1 Answers
LeZoe
07/30/25 10:32am
Car shaking during hard acceleration can be attributed to the following causes and solutions: 1. Dirty throttle body or excessive carbon buildup in fuel injectors and intake manifold. Solution: Clean the throttle body, fuel injectors, and intake manifold. 2. Incomplete fuel combustion in cylinders. Solution: Clean the fuel system and switch to higher-quality gasoline with a higher octane rating. 3. Engine malfunction. Solution: It is recommended to send the vehicle to a 4S shop as soon as possible for professional diagnosis and repair based on the actual condition. 4. Bulges or foreign objects on the tread of any of the four tires. Solution: Clean the tires, or replace them if the damage is severe.
Was this review help?
15
5
Share
More Forum Discussions

How to Wire a Motorcycle Alarm?

Connect the red wire to the red wire of the ignition switch, the orange wire to the black wire of the ignition switch, and the black wire of the alarm to the ground. The blue wire is the ignition wire; generally, the red-yellow wire is the ignition wire for most motorcycles. Connect the blue wire to the red-yellow wire, and connect the two yellow wires to the turn signals respectively.
5
4
Share

What is the correct way to shut down a motorcycle?

Reduce the throttle to lower the speed, and if necessary, gently apply the rear brake. Shift the transmission to fourth or first gear (depending on road conditions). When the vehicle reaches the predetermined point, shift to neutral, gently apply the rear brake, and you can smoothly stop the motorcycle at the intended location.
7
5
Share

How to Inspect a Motorcycle?

You can apply for the inspection compliance mark (commonly known as annual inspection) at the vehicle management office within three months before the expiration of the motorcycle's inspection validity period. Before applying, the owner of the motor vehicle should complete the handling of any road traffic violations and accidents related to the vehicle.
18
2
Share

How to Force Open a Motorcycle Magnetic Cover Lock?

Try using a similar key from another brand or model; sometimes it might coincidentally open that magnetic cover lock. Remove the front panel and the front cargo box to take off that magnetic cover lock, then you can access the keyhole.
4
2
Share

How to Use Motorcycle Tubeless Tire Sealant?

Unscrew the tire valve cap, then use a valve wrench to remove the valve core and completely deflate the tire. If there is existing sealant in the tire, ensure the valve is facing downward during deflation. Before use, invert the sealant bottle and shake it vigorously to ensure even mixing. Remove the adapter tube from the sealant bottle, cut open the outlet, and attach the adapter tube. Connect the sealant and adapter tube to the valve stem, then squeeze the recommended amount of sealant into the tire.
18
0
Share

How to Penalize Illegal Parking of Motorcycles?

If law enforcement officers are present at the scene, they can point out the illegal act, issue a verbal warning, and order the driver to leave immediately. Depending on the situation, penalties may be imposed. If the motorcycle obstructs the passage of other vehicles or pedestrians, the illegal driver may be fined.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.