What Causes Car Body Vibration After Ignition?

2 Answers
VonJames
07/25/25 5:28am
The severe vibration of a car engine can be caused by aging or loosening of engine mounts, carbon buildup issues, or fuel system malfunctions. Ignition System Malfunction: Problems in the ignition system, such as faults in the car's ignition system, can lead to poor ignition system performance and inadequate spark plug firing, resulting in unstable engine operation during idle. Aging of Engine Mounts: Aging or loosening of engine mounts, which are rubber blocks placed between the engine and the car frame, can cause severe engine vibration. These mounts are designed to reduce engine vibration and provide cushioning during operation, as well as to secure the engine in place. Once the engine mounts age or loosen, the engine's vibration becomes significantly worse. Carbon Buildup Issues: Carbon deposits, including those in the cylinders, throttle body, spark plugs, and intake manifold, can affect the engine's performance. Excessive carbon buildup inside the engine can impact ignition energy, air intake efficiency, and the air-fuel mixture ratio, leading to unstable power output and causing vibrations during idle and acceleration. Poor Fuel Quality: In many cases in China, unstable engine operation, such as "idle" vibration, is closely related to fuel quality. Poor fuel quality can damage engine performance, leading to idle vibration issues.
Was this review help?
12
2
Share
WilliamRose
08/10/25 5:44pm
Body shaking after startup is actually quite common. I’ve encountered it a few times myself, mainly due to issues with the engine ignition system. For example, worn or aged spark plugs can cause uneven ignition, making the car jerk. Another common cause is loose engine mounts—the rubber pads can deform over time, leading to noticeable shaking when idling. Excessive carbon buildup is also troublesome; it can clog the throttle body, disrupting air intake and causing instability. I recommend visiting a reliable repair shop as soon as possible—don’t let a minor issue escalate into major repairs, especially since shaking at high speeds can be dangerous. Regular maintenance, such as cleaning ignition coils and fuel injectors, can help prevent these problems.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

What Causes Car AC to Freeze and Stop Blowing Air?

The reasons why a car's air conditioning system freezes and stops blowing air are as follows: 1. Clogged AC filter: This can prevent airflow, leading to freezing. You can remove the AC filter to check if it's too dirty, as excessive dirt can block the filter and stop airflow. 2. Blower motor failure: A damaged blower motor can cause the AC to stop blowing air. If this occurs, it's necessary to promptly visit a 4S shop or repair facility for inspection and repair. 3. Issues with the car's AC control system: For example, a faulty expansion valve. If the expansion valve opens too much, it can cause the evaporator temperature to drop too low, leading to ice blockage and preventing airflow. If the AC system shows signs of freezing and you can't identify the cause, it's advisable to visit a repair shop for professional diagnosis and replacement of faulty components.
20
0
Share

Is It Illegal to Modify the Front Face of an Old Model Car to a New One?

Modifying the appearance of an old model car to resemble a new one is not illegal as long as it is legally registered and recorded with the vehicle management office. However, if it is not registered, it is considered an illegal act. Below is a brief introduction to motor vehicle violations: 1. Unclear license plate: Heavy and medium-duty trucks and their trailers fail to display the enlarged license plate number as required, or the enlarged license plate number is unclear. 2. Unauthorized color change: Spraying or pasting logos, body advertisements, changing the body color, or replacing the engine, body, or frame without completing the required change registration within the specified time limit. 3. Safety non-compliance: Trucks and trailers fail to install side and rear lower protective devices, paste reflective body markings, or undergo safety technical inspections within the specified period. 4. Unregistered changes: The vehicle owner fails to apply for the transfer of the vehicle registration to the local vehicle management office within the specified time limit after the vehicle registration is transferred out from the original registration office.
10
0
Share

Does Starting at 2000 RPM Damage a CVT Transmission?

Starting at 2000 RPM does not damage a CVT transmission. High engine RPM during startup is a normal occurrence. Typically, the engine can reach 1200-1500 RPM at the moment of startup, and in cold weather conditions, the engine RPM may even be higher. Below is an introduction to CVT transmissions and their functions: Introduction to CVT Transmissions: A transmission is a gearbox that alters the gear ratio and the direction of motion. It is located between the clutch and the central drive. Functions of a CVT Transmission: During vehicle operation, to adapt to different driving conditions, the driving force and speed of the car need to vary within a certain range. Since the existing engine's torque and speed range cannot meet these requirements, a transmission is installed to address this.
17
3
Share

Do You Need to Press the Clutch When Starting the Car?

Starting the car requires pressing the clutch. The reasons are as follows: 1. Pressing the clutch reduces the engine load, thereby prolonging the engine's lifespan; 2. If the clutch is not pressed during ignition for a long time, the engine's ignition performance will gradually deteriorate; 3. Starting the car without pressing the clutch, although possible, increases the starter's load and causes the battery to output a higher current, negatively affecting the engine's ignition performance. Over time, this can cause certain damage to the car; 4. Pressing the clutch when starting also helps prevent potential hazards.
9
4
Share

Which country's brand is DS in the automotive industry?

DS is a French automotive brand, with models such as the DS4S, DS5, DS7, DS5LS, and DS6 under its lineup. Taking the DS5 as an example, its body dimensions are: length 4530mm, width 1871mm, height 1520mm, with a wheelbase of 2727mm, a fuel tank capacity of 60 liters, a trunk capacity of 468 liters, and a body weight of 1600kg. The DS5 is equipped with a 1.6T turbocharged engine, delivering a maximum horsepower of 181PS, a maximum power of 133kW, a maximum torque of 250Nm, and is paired with an 8-speed automatic transmission.
1
3
Share

What are the reasons for brake pad noise without pressing the brake?

The reasons for brake pad noise without pressing the brake are: 1. Corrosion of the brake disc or brake pads; 2. The brake pads are new; 3. Excessive wear of the brake disc and brake pads; 4. Incorrect installation or mismatched model of brake pads; 5. Use of inferior or overly hard brake pads; 6. Abnormal brake caliper or lack of brake fluid; 7. Presence of foreign objects between the brake drum or disc and the pads. Solutions for abnormal brake pad noise: 1. Apply butter or specialized lubricant at the connection between the brake pads and the brake caliper; 2. Regularly inspect and replace the brake pads; 3. Regularly adjust the brakes; 4. Avoid frequent use of the brakes.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.