What Causes Car Air Conditioning Buttons to Malfunction?

How to Adjust Rearview Mirrors for Subject 2 Driving Test?

Here is the relevant introduction on adjusting rearview mirrors for Subject 2 driving test: 1. Reverse Parking: During reverse parking training, when moving the vehicle left backward, focus mainly on the left mirror; when moving right backward, focus on the right mirror. Adjusting the rearview mirrors vertically allows you to clearly see the position of points and lines on the ground, serving as a reference during training. Therefore, adjust the mirrors vertically until you can see the rear wheels or even the contact point between the rear wheels and the ground. Adjusting the mirrors horizontally affects the breadth of your field of vision, helping you make early judgments during training. Hence, adjust the mirrors horizontally until you can see the rear of the car or even the rear corners of the garage. 2. Hill Start: When going uphill, maintain a 30cm distance between the car body and the right roadside line. Adjust the right mirror downward until you can clearly see the wheels and the right roadside line. 3. Right-angle Turn: When approaching a right-angle turn, if it's a left turn, stay close to the right roadside line. Adjust the right mirror outward and downward until you can clearly see the distance between the car body and the roadside line. During the turn, maintain a 10cm distance between the car body and the right line, which is the optimal distance for a right-angle right turn. The same principle applies to right turns. 4. Curve Driving: During curve driving, rearview mirrors serve as excellent auxiliary references. Adjust both mirrors maximally downward and inward to clearly observe the distance between the rear wheels and the S-curve line, allowing timely adjustments in direction and speed. 5. Parallel Parking: Parallel parking involves frequent use of both side mirrors. Taking right parallel parking as an example, before parking, ensure the wheels are about 10cm from the roadside line. When the rear wheels are about to reach the front line of the parking space, turn the steering wheel fully to the right. Both steps require the right mirror to clearly see the rear wheels and the roadside line. The next steps involve looking at the inner corner of the parking space to straighten the steering wheel and observing when the left rear wheel touches the outer line of the parking space to turn the steering wheel fully right for parking. Both steps require the left mirror, which should be slightly more outward compared to the right mirror to ensure the inner corner of the parking space is visible immediately.

15

5

Share

What are the body dimensions of the Yingzhi 737?

The Yingzhi 737 has a body length of 4510mm, a width of 1760mm, a height of 1750mm, and a wheelbase of 2785mm. More details about the Yingzhi 737 are as follows: 1. The Yingzhi 737 is equipped with a 1.5-liter naturally aspirated engine, with a maximum power of 83kw, a maximum torque of 141nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4000 rpm. 2. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 3. The front suspension of the Yingzhi 737 uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The use of a torsion beam in the rear suspension can expand the rear seating space and trunk space.

9

3

Share

Which car brand does the Leapmotor S01 belong to?

Leapmotor S01 belongs to the Leapmotor brand. More related information is as follows: 1. It was jointly invested by Zhejiang Dahua Technology Co., Ltd. and its major founders. It is an innovative intelligent electric vehicle enterprise and a vehicle manufacturer with complete independent R&D capabilities for intelligent electric vehicles. 2. The dimensions of the Leapmotor S01 are 4075mm in length, 1760mm in width, and 1380mm in height, with a wheelbase of 2500mm. It is equipped with a fixed gear ratio transmission. The body type of the Leapmotor S01 is a 3-door, 4-seat hatchback, with a top speed of 140 km/h, a luggage compartment volume of 237 to 690L, and tire specifications of 205/45R17.

12

5

Share

What is the Difference Between O-Ring Chains and Standard Chains?

O-ring chains are designed to seal lubricants, isolating the components that require lubrication from the output parts to prevent oil leakage. Standard chains refer to a series of metal links or rings used to obstruct traffic pathways, such as on streets, river or harbor entrances, or chains used in mechanical transmissions. The differences between O-ring chains and standard chains can be summarized in three aspects: 1. Different classifications: (1) O-ring chains: O-rings are generally categorized into single-piece and assembled types; (2) Standard chains: These include short-pitch precision roller chains, heavy-duty transmission curved plate roller chains, and chains for cement machinery. 2. Different service life: (1) O-ring chains: O-ring chains are durable and have a long lifespan but are relatively heavier; (2) Standard chains: Standard chains are more flexible but have a shorter lifespan compared to O-ring chains. 3. Different structures: (1) O-ring chains: Each joint of an O-ring chain has an O-ring seal on both sides of the pin; (2) Standard chains: Standard chains lack O-ring seals and cannot block sand, mud, water, or dust.

2

1

Share

How to Distinguish Between Automatic and Manual Transmission Cars?

Manual and automatic transmissions differ in the following ways: 1. Different operation difficulty: Manual transmission primarily relies on the driver stepping on the clutch to complete gear shifting operations. Automatic transmission mainly depends on the hydraulic transmission principle of the torque converter to automatically complete gear shifting. 2. Different safety levels: The neutral gear in manual transmission cars causes the vehicle to lose power, posing a safety hazard during driving. Automatic transmission cars cannot use the neutral gear while driving. 3. Different operations: Manual transmission involves manually moving the gear lever to change the gear engagement device inside the transmission, altering the gear ratio. Automatic transmission means the driver does not need to shift gears manually; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions.

8

1

Share

What to Do If You Cross the Solid White Line When Turning Right at an Intersection?

Turning right and crossing the solid white line results in a fine and a deduction of 3 points. Below are the specific details on how to check for traffic violations related to motor vehicles: 1. If a motor vehicle commits a violation: If penalties are required according to regulations, the traffic police department usually posts the violation information online within 7 working days. 2. If you commit a violation while driving: The processing time for electronic monitoring by traffic police is approximately 3-5 working days. Whether the motor vehicle is suspected of violating traffic rules can generally be checked after about a week. If no results are found, it can usually be confirmed that no violation occurred. 3. Violations across provinces, municipalities, or autonomous regions: The time frame mentioned for publishing violation information applies within the same province, municipality, or autonomous region. For violations that occur across different regions, the query time may extend to more than 15 working days.

11

3

Share

What Causes Car Air Conditioning Buttons to Malfunction?

How to Adjust Rearview Mirrors for Subject 2 Driving Test?

What are the body dimensions of the Yingzhi 737?

Which car brand does the Leapmotor S01 belong to?

What is the Difference Between O-Ring Chains and Standard Chains?

How to Distinguish Between Automatic and Manual Transmission Cars?

What to Do If You Cross the Solid White Line When Turning Right at an Intersection?

What Causes High Engine Temperature?

What is the sound when hitting the radar?

Which institutions can inspect used cars?

Standard Values for Intake Air Temperature Sensor?