What Causes BYD Window Lift Failure?

How to Set Up One-Button Unlock for All Four Doors on an Audi

Without pressing the brake pedal, press the one-touch start button to power on the vehicle. Then locate the "Vehicle Settings" option on the central control screen, and find the "Door Locks" option in the list. If this option is enabled, simply disable it to achieve one-button unlocking for all four doors. For some vehicles that cannot adjust door lock settings, you'll need to visit an authorized dealership to have technicians modify the unlocking program in the ECU using specialized equipment.

18

0

Share

How to Use the Cruise Control on Qoros 5?

First, turn on the cruise control switch. When reaching the desired speed, press the SET button to activate cruise control. The SET button at the bottom left represents setting the cruise control speed, or it can be directly set to the current speed. Use the +/- buttons to adjust the speed. During cruise control, operations such as shifting gears or stepping on the brake will interrupt the cruise. In this case, you can press the RES button to restore the last set speed and continue cruising.

15

4

Share

How to Change the Scheduled Time for Subject 2?

Open the Comprehensive Traffic Safety Service Management Platform and select your province/city. Click 'Register Now', fill in user information including ID card number and the mobile number used during registration, then select 'First-time applicant for motor vehicle driver's license'. For exam scheduling, choose the subject, test venue, and the start/end time for the application. Confirm submission by verifying all information and clicking 'Complete'. The system will generate a service serial number and arrange the exam on the scheduled date.

3

1

Share

Will points be deducted for sitting cross-legged in the passenger seat?

Sitting cross-legged in the passenger seat does not result in point deductions. However, if passengers become too relaxed and adopt incorrect postures, sudden turns, braking, or accidents may lead to injuries ranging from sprains and fractures to even life-threatening situations. Hazards of sitting cross-legged in the car: When relaxed, some passengers may place one or both legs on the seat. Sitting cross-legged inherently carries many risks, such as causing diseases in the lower limbs, knees, and lumbar spine. During the ride, vehicle jolts and swaying can exacerbate these hazards. Even when wearing a seatbelt, the cross-legged posture can alter the belt's position, preventing it from effectively securing the passenger during emergencies. This is particularly dangerous as the impact on the abdomen and ribs cannot be transferred to the legs, leading to severe injuries. Hazards of placing legs on the dashboard: This posture obstructs the driver's view of the right-side mirror and road conditions, increasing the risk of right-side collisions. In the event of sudden braking or a frontal collision, the upper body may violently lurch forward. With legs placed too high, the body can be compressed into a "V" shape, subjecting the waist to extreme impact forces. Under high-speed and intense impacts, there is even a risk of high-level paralysis or suffocation. Additionally, this posture can interfere with the proper deployment of the front passenger airbag.

1

5

Share

What is the reason for BMW fan output stage detecting an open load circuit?

BMW fan output stage detects an open load circuit due to reasons such as coil overheating damage or absence of 220V AC input, as detailed below: Coil overheating damage: Prolonged use of the fan causes excessive dust accumulation, increasing the friction coefficient between the rotor and bearings, leading to rotor obstruction or even seizing, resulting in coil overheating damage. Solution: After powering off, open the rear cover of the fan, add a few drops of lubricating oil to the bearing sleeves at both ends of the rotor, and rotate the blades while adding oil until they move freely, thereby eliminating the blower fault. No 220V AC input: This may be due to the absence of 220V AC input or coil damage. Solution: Disconnect the power, separate the two lead wires of the fan from the power supply connection points, leaving them suspended. Turn on the power and carefully measure both ends of the power line with a test pen. If one end lights up and the other does not, it indicates the power input is normal, and the issue might be with the fan coil. If both ends do not light up, it suggests a problem with the power input line.

14

4

Share

Correct Method for Defogging the 2021 Sagitar

Press the car's brake pedal all the way down to prepare for starting the engine. Press the one-touch start button to start the engine, then let it idle for a while. Allow the engine to idle for about 10 minutes to raise the coolant temperature to normal operating levels. Press the AUTO button to activate the automatic climate control system. Press the defogger button to clear fog; press the front defogger control button to clear the windshield, or press the rear defogger control button for the rear window.

10

0

Share

What Causes BYD Window Lift Failure?

How to Set Up One-Button Unlock for All Four Doors on an Audi

How to Use the Cruise Control on Qoros 5?

How to Change the Scheduled Time for Subject 2?

Will points be deducted for sitting cross-legged in the passenger seat?

What is the reason for BMW fan output stage detecting an open load circuit?

Correct Method for Defogging the 2021 Sagitar

Is there an SMS notification after fuel card consumption?

How to Shift Gears in a Porsche Tutorial

What Causes the Cigarette Lighter Light on Baojun 510 Not to Work?

Is a Driver's License Required for Handling Traffic Violations?