What Causes Brake Noise Without Pressing the Brake Pedal?

1 Answers
MacOscar
07/30/25 3:58am
The reasons for brake noise without pressing the brake pedal are as follows: 1. Use of inferior or overly hard brake pads: If inferior or overly hard brake pads are used, they will produce a squeaking sound when rubbing against the brake disc during braking. Therefore, it is essential to use high-quality brake pads when replacing them. 2. Presence of sand or foreign objects between the brake pad and brake disc: During normal driving, it is inevitable to pass through some complex road conditions. Due to the unique design of disc brakes, some sand and foreign objects may enter between the brake pad and brake disc, which can also cause abnormal noise during braking.
Was this review help?
1
4
Share
More Forum Discussions

Do New Cars Need Antifreeze?

New cars do not need antifreeze. Antifreeze should be replaced approximately every two years, with each replacement requiring between 4 to 5 liters. The main functions of antifreeze are: 1. Preventing the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head during cold winter parking; 2. Effectively preventing boiling during high summer temperatures to avoid overheating; 3. Antifreeze also has anti-corrosion properties. The steps for replacing antifreeze are: 1. Unscrew the radiator cap to drain the old antifreeze; 2. Run the engine at idle and inject clean water until the radiator discharges clear water; 3. Wait for the clean water to drain completely and close the water valve; 4. Refill with new antifreeze until the liquid level is between the MAX and MIN marks; 5. Close the cap and let the engine idle for two to three minutes.
17
2
Share

What do the letters in a car license plate number represent?

Car license plate letters represent a specific city or district within a province or municipality. A car license plate, also known as a vehicle registration plate, serves the following purposes: 1. Identifying the vehicle's region of registration through the plate number; 2. Enabling tracing of the vehicle's owner and registration details based on the plate number. Car license plates are categorized by their applicable scope into: 1. Special plates for new energy vehicles; 2. Plates for large vehicles; 3. Plates for small vehicles; 4. Trailer plates. The installation method for car license plates is as follows: 1. Align the plate with the vehicle's mounting points, ensuring it is straight and properly positioned; 2. Insert the screw rods into the mounting holes and secure them with a flat-head screwdriver; 3. Snap the four screw caps into place in sequence.
2
1
Share

How to Check and Display the Engine Oil Level in a Range Rover Sport?

To check and display the engine oil level in a Range Rover Sport, follow these steps: 1. Open the hood and turn on the ignition; 2. Access the instrument cluster menu and select the maintenance information menu; 3. After entering the oil level selection menu, press the Cancel button on the steering wheel twice consecutively to update and view the oil level. The Range Rover Sport is a mid-to-large-sized 5-door, 5-seat SUV with the following dimensions: length 4879 mm, width 2073 mm, height 1803 mm, and a wheelbase of 2923 mm. It is equipped with a 3.0T twin-turbocharged engine, delivering a maximum power of 265 kW and a maximum torque of 495 Nm, paired with an 8-speed automatic transmission.
7
4
Share

Should You Brake or Depress the Clutch First When Downshifting a Manual Transmission Car?

When downshifting a manual transmission car, you should brake first. A manual transmission, or manual gearbox, operates by using the gear shift lever to alter the meshing gear ratios, thereby changing the driving torque to suit different driving conditions. The driving method for a manual transmission car is as follows: 1. Fully depress the clutch pedal; 2. Push the gear lever to engage the 1st gear, the starting gear; 3. Gently press down the turn signal lever to activate the left turn signal, alerting vehicles in front and behind; 4. Press the horn button to notify pedestrians in front of the vehicle that you are about to start; 5. Release the vehicle's handbrake; 6. Lift the left foot gradually until the clutch reaches the half-engaged state, at which point the vehicle will begin to vibrate slightly; 7. As the vehicle starts moving, release the clutch and gently press the accelerator.
12
1
Share

Is Dongfeng Renault a joint venture car?

Dongfeng Renault is a joint venture car, which belongs to the small SUV category. Taking the Dongfeng Renault City K-ZE 2019 E-Fun model as an example, its body dimensions are: length 3735 mm, width 1579 mm, height 1484 mm, wheelbase 2423 mm, minimum ground clearance 151 mm, and trunk capacity 300 liters. The Dongfeng Renault City K-ZE 2019 E-Fun model is equipped with a permanent magnet synchronous motor, with a total motor power of 33 kW and a total motor torque of 125 Nm. It is paired with a 1-speed fixed gear ratio transmission. The front suspension uses a MacPherson independent suspension, and the rear suspension uses a torsion beam non-independent suspension.
10
1
Share

What are the effects of a tire being crushed by a curb?

The effects of a tire being crushed by a curb are: 1. It can easily damage the suspension system; 2. It may lead to bulging and increase the risk of a tire blowout. The functions of a tire are: 1. To ensure good ride comfort and smooth driving; 2. To cushion the impact during driving; 3. To ensure good adhesion between the wheel and the road surface, improving traction, braking, and passability; 4. To bear the weight of the vehicle. Precautions for tire usage include: 1. Avoid starting the car too abruptly; instead, start smoothly at a low speed; 2. Drive straight on good roads without swerving or making sharp turns; 3. Control the speed appropriately when going downhill based on the slope's gradient, length, and road conditions.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.