What Causes Brake Noise in Volvo Cars?

2 Answers
LeAvery
09/08/25 5:20am
Volvo brake noise may be caused by the following reasons: Break-in period for new cars: The break-in of brake pads is an important part. It usually takes a few hundred kilometers of driving before the brakes feel more comfortable. Newly replaced brake pads also need a break-in period to better integrate with the old rotors. Initially, the brake pads may feel very hard, and it typically takes a few hundred kilometers of driving for them to feel better. Small sand particles in brakes: While driving, very small sand particles may get between the pads and rotors, sometimes causing noise due to friction. This usually does not require repair; driving for a while can help the particles fall out. Brake damage: Missing or damaged fixing screws on the brake rotors can also cause brake noise. If there is a fault in the brake system, inspection and repair are necessary.
Was this review help?
11
0
Share
SanLila
09/20/25 3:58am
Last time I drove my Volvo, I suddenly heard a sharp squealing sound when braking, which felt like metal scraping and was quite unpleasant. I immediately became concerned about safety. Common causes include severely worn brake pads, hard spots or impurities on the pads, or uneven surfaces causing friction noise. It could also be due to rust on the brake discs, especially after rainy or humid weather, but this type of noise might disappear after driving for a while. If the brake pads were recently replaced, slight noise during the first few hundred kilometers of the break-in period is normal. However, don’t take it lightly, as unusual noises may indicate reduced braking efficiency, increasing the risk of rear-end collisions. I recommend regular inspections of the braking system, such as having it professionally checked every six months or every 10,000 kilometers to ensure everything is functioning properly. Regularly cleaning the tires and brake areas can also help reduce dust buildup.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

What to Do If the Car's Exhaust Pipe Rusts?

The car's exhaust pipe can be treated for rust by using a lift to raise the vehicle and then spraying some rust remover on the exhaust pipe. This helps remove rust and prevents further rusting. The sections of the exhaust pipe most prone to rust are the middle and rear sections located on the chassis. Due to the extremely high temperatures of the exhaust pipe, it is not possible to install protective plates. The exhaust pipe is part of the engine's exhaust system, which mainly includes the exhaust manifold, exhaust pipe, and muffler. The car's exhaust pipe is installed between the engine's exhaust manifold and the muffler, providing a flexible connection for the entire exhaust system. This setup helps reduce vibration and noise, facilitates installation, and extends the lifespan of the exhaust and muffler system.
9
4
Share

How to Tell If the Car You Bought Is New

Methods to determine if the car you bought is new: 1. Check the production date on the nameplate located on the co-pilot side. For domestically produced cars, it should not exceed 3 months, and for imported cars, it should not exceed 6 months. Otherwise, it may be a stock car. 2. Check the car's odometer, which should not exceed 50 kilometers. If you suspect the dealership has tampered with the odometer, you can feel the exhaust pipe for black residue, which indicates the car has been driven more than 50 kilometers. 3. Inspect the production date of the tires. There are four consecutive numbers on the tires; the first two digits represent the week of production (the week of the year), and the last two digits represent the year. 4. Open the engine hood and check the screws for any signs of being turned.
16
4
Share

How to Turn Off the Auto Start-Stop Function in the Excelle?

The method to turn off the auto start-stop function in the Excelle: 1. The start-stop function switch is located next to the ignition switch or on the center console panel; 2. After the engine starts, the auto start-stop system will activate, and it can be manually deactivated by pressing the switch button. The Excelle is another masterpiece launched by the Buick brand following the new Regal, new LaCrosse, and Enclave, based on the "global platform, European and American technology." It features a new wing-shaped chrome grille, wing-shaped LED auto-sensing headlights, wing-shaped LED taillights, dual-peak body characteristic lines, an ultra-wide-view exterior rearview mirror, and 16-inch dual five-spoke luxury two-tone aluminum alloy wheels.
18
5
Share

Is it unsafe to fill up the gas tank in summer?

It is not advisable to fill up the gas tank completely in summer, as doing so can not only cause damage to the vehicle and disrupt the normal operation of the engine, but also pose a risk of fire or explosion. Additional information: 1. A full gas tank can easily block the vent hole. Once the vent hole is blocked, negative pressure will form inside the tank, leading to poor fuel supply or even a complete lack of fuel. This can result in the vehicle failing to start immediately after refueling. 2. When driving on highways, a full tank can cause jerky movements, making the ride uncomfortable for both the driver and passengers. Moreover, if the tank is overfilled, especially in summer, gasoline vapors may not form properly. These vapors can directly enter the carbon canister through the fuel components, potentially damaging it.
20
1
Share

What are the reasons for a vehicle's OBD test failure?

Reasons for a vehicle's OBD test failure: 1. The car's OBD system is too outdated and needs a system upgrade at a 4S shop; 2. There are faults in the car's system, which can be resolved by going to a 4S shop to troubleshoot, having the mechanic inspect and repair, then clearing the fault codes before retesting. OBD is the On-Board Diagnostics system, which monitors the engine's operating conditions to check if the vehicle's emissions exceed standards. If they do, it immediately issues a warning. When a system fault occurs, the malfunction indicator lamp or check engine warning light will illuminate, and the Powertrain Control Module (PCM) stores the fault information in memory. Through a specific procedure, the fault codes can be read from the PCM.
7
4
Share

How to Replace the Battery in an Old Magotan Car Key?

Steps to replace the battery in an old Magotan car key: 1. Locate the release button on the key, press it, and pull out the mechanical key; 2. Press the plastic clip and remove the battery holder; 3. Take out the old battery; 4. Install the new battery, ensuring the positive side faces upward; 5. After replacing the battery, reassemble the key in the reverse order of disassembly. The Magotan is a mid-size sedan under the Volkswagen brand, with body dimensions of 4866mm in length, 1832mm in width, and 1464mm in height. This model is equipped with three types of engines: a 1.4L turbocharged engine, a low-power 2.0L turbocharged engine, and a high-power 2.0L turbocharged engine.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.