What Causes Brake Noise Immediately After Washing the Car?

1 Answers
AbelRose
07/30/25 5:31am
Reasons for brake noise after washing the car are as follows: 1. Water enters the wheel's brake drum during washing, and sand particles splash onto the brake pads along with the water, causing noise when braking. 2. It is recommended not to park the car immediately after washing. Instead, consciously drive a certain distance and perform multiple braking actions to expel the water from the brake drum and prevent issues. Below are specific methods for maintaining car brake components: 1. Driving with the handbrake engaged causes greater wear to the brake components as speed increases, and also damages the tires to some extent. 2. Develop correct driving habits. Before driving, check if the handbrake is released and pay attention to the dashboard. 3. Relatively speaking, the dashboard displays the most comprehensive information. By constantly observing the dashboard and paying attention to warning lights, you can avoid driving with the handbrake engaged.
Was this review help?
8
2
Share
More Forum Discussions

What is the maintenance method for the Xiali N7?

You can perform car maintenance yourself by purchasing the necessary items according to the instructions in the maintenance manual. However, if the car is still under warranty, you must go to a service station because if you perform maintenance yourself, the service station will not provide compensation if any issues arise later. Maintaining the wiper blades: Wiper blades are particularly prone to wear and tear. They can be replaced at external beauty shops, which is much cheaper than at 4S stores, and the quality is also good. Maintaining the air filter: During regular use, frequently open the front hood, take it out, and blow it clean. The air filter doesn’t need to be replaced even after several oil changes, especially in cities with relatively light air pollution.
13
3
Share

What is the reason for the rear wiper of BMW X5 not spraying water?

WU_BA_QI_CHE_PIC_PLACE_HOLDER The wiper not spraying water is caused by the filter screen on the motor being clogged with scale or decomposed matter. Usage of the wiper: By pushing the control lever up and down, you can control the wiper's operation (intermittent, off, auto, and high/low speed). If in the auto adjustment state, you can change the sensitivity of the rain sensor-controlled wiper by turning the adjustment knob, thereby adjusting the wiper's frequency. As for the front windshield washing, simply pull the control lever lightly toward the driver, and the windshield washer and wiper will work simultaneously. Precautions when using the wiper: If you find that the washer fluid is not spraying out but the wiper is working, do not continue to press the button. At this time, check if the washer fluid warning light is on. If it is, you should promptly refill the washer fluid.
11
5
Share

What is the difference between Audi A4 4WD and 2WD?

Four-wheel drive (4WD) and two-wheel drive (2WD) vehicles differ in the number of driven wheels. A 2WD vehicle has only two driven wheels, while a 4WD vehicle has four. Meaning of 2WD: Two-wheel drive means that only two wheels are driven, typically either the front wheels (front-wheel drive) or the rear wheels (rear-wheel drive). In contrast, four-wheel drive means all four wheels can be driven simultaneously, with both the front and rear wheels providing power. Four-wheel drive (4WD): Four-wheel drive offers advantages when driving on poor road conditions. For example, if the front wheels lose traction, the rear wheels can still drive the vehicle, making it suitable for off-road use. However, 4WD consumes more fuel. On the other hand, 2WD is more suitable for city commuting, offering lower fuel consumption compared to 4WD, though its off-road performance is inferior to that of 4WD.
20
5
Share

Does the Mercedes S350 require lift mode for tire replacement?

The Mercedes S350 does not require lift mode for tire replacement. Tires must be replaced when reaching the wear limit: The tire wear has reached the wear limit indicator. There are small triangular patterns along the sidewall and the edge of the tread. Moving horizontally from any of these triangles to the tread pattern, you will find small raised bars within the tread grooves, which are the safety indicators. If the tread wears down to this point, it means the tires should be replaced. Replace tires based on aging condition: Check the aging condition of the tires. If there are many cracks but they do not affect normal use, the tires can still be used. However, if the cracks are deeper than 3 millimeters, the tires need to be replaced. Tires with tread deformation or bead damage must be replaced: Tires with tread deformation or bead damage, tires that have been driven flat causing sidewall damage, or tires corroded by chemicals should not be used.
16
3
Share

What is the reason for the ambient lights in the Mercedes S450 not working?

The reason the ambient lights in a Mercedes are not working could be that the car is not powered on, preventing the ambient lights from turning on, or there might be an issue with the wiring. The role of ambient lights: These ambient lights usually come in colors such as red, blue, green, and others, making the car interior more vibrant at night, enhancing the atmosphere, and creating a certain mood inside the vehicle. They have many positive effects on both the car's ambiance and the passengers. Safety precautions when using ambient lights: However, it's important to note that these ambient lights could potentially affect normal driving. If the lights flash too quickly or are too bright, they might distract the driver, leading to safety hazards. Therefore, when setting up ambient lights, it's crucial not to interfere with safe driving.
10
3
Share

What are the reasons for the dashboard of Chery Fengyun 2 not lighting up?

Chery Fengyun 2 dashboard not lighting up reasons are as follows: Dashboard light damage: If the dashboard lights are damaged, they need to be replaced promptly; Power supply circuit failure: If the dashboard power supply circuit is damaged, resulting in an open circuit or short circuit, it can also cause the car dashboard not to light up; Fuse damage: If the dashboard power supply fuse is blown, it will naturally result in no power supply, and the dashboard will not light up. Battery issues: For example, if the battery has reached the end of its lifespan, or if the battery terminals are loose, making poor contact, or the terminals might be oxidized. Dashboard CPU damage: If all the indicator lights on the dashboard are not lighting up and the car shuts off immediately after starting, it is highly likely that there is an issue with the dashboard, with a common cause being damage to the dashboard CPU.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.