What Causes Body Trembling During Acceleration in Volkswagen Tiguan?

1 Answers
NicoleRose
07/29/25 12:04pm
The causes of body trembling during acceleration in Volkswagen Tiguan are as follows: 1. Excessive carbon deposits: Severe carbon buildup in the engine cylinders can lead to clogged spark plugs and valves, directly causing the car to shake at idle. If the vehicle's acceleration performance has significantly declined and the shaking is persistent, consider an engine cylinder cleaning. 2. Fuel supply system malfunction: Unstable fuel pressure can cause inconsistent mixture concentration, resulting not only in shaking but also unstable idle. First, consider replacing the fuel filter, as prolonged use may clog the filter element. Then, check the fuel pressure bypassing the fuel filter; if abnormal, the issue might be with the fuel pump. 3. Worn engine mounts: This is a very common cause of shaking. If the engine shaking worsens over time but the power output does not weaken accordingly, it may be due to faulty engine mounts. 4. Misfiring cylinders: This is the most common cause of engine shaking, if not the only one. The problem lies with the engine ignition coils or spark plugs. If the ignition coils malfunction or the spark plugs fail to fire for some reason, the car will experience shaking.
Was this review help?
9
0
Share
More Forum Discussions

How to Read the Fuel Gauge on a Motorcycle to Check Fuel Level?

The F on a motorcycle's fuel gauge represents a full tank, while the E in the red zone indicates low fuel. However, when the needle points to the red zone near E, there is still approximately one-third to one-quarter of the total fuel capacity remaining in the tank. Motorcycles are powered by gasoline engines and are two- or three-wheeled vehicles steered by handlebars, known for their agility, speed, and widespread use in patrols, passenger and cargo transport, as well as sports equipment. All scooters and underbone motorcycles come equipped with fuel gauges, while some standard (or "cross" type) motorcycles may not have them. To address this, standard motorcycles feature a fuel tank switch with main and reserve positions. When fuel is abundant, the switch is set to the main tank position. When fuel runs low in the main position and stops flowing, the switch can be turned to the reserve position, which provides about 2 liters of fuel—enough to travel over 50 kilometers.
20
4
Share

How to replace the wiper blades on a Skoda Octavia?

Skoda Octavia wiper blade replacement method is as follows: 1. First, use a flat-head screwdriver to open the plastic cover at the connection between the wiper arm and the wiper blade, and hold the wiper blade with your hand. 2. Pull firmly along the direction of the wiper arm (the part where the base of the arm connects to the wiper pivot), and the wiper blade will come off. 3. For installation, reverse the removal process: insert the new wiper blade into the groove of the wiper arm, cover it with the plastic cap, and the replacement is complete. Wiper systems generally include vacuum wipers, electric wipers, and wipers with electronic control units. The drawback of vacuum wipers is that the movement speed of the wiper blade is unstable; when the engine's vacuum decreases (such as when the car is climbing a hill), the wiper blade may stop, obscuring the driver's vision. Vacuum wipers were phased out in 1972 and replaced by electric wipers.
15
1
Share

What is the difference between lfb12 and lfb11?

lfb12 and lfb11 differ in battery capacity. lfb11 and lfb12 are two engines from the same series of Honda, utilizing the working principle of the i-MMD system. In the i-MMD system, both motors are placed inside the transmission housing, and the generator does not participate in driving operations. It is only connected to the engine output shaft via gears. As soon as the gasoline engine starts, it begins generating electricity to charge the battery. Honda's i-MMD motor operates in complete synchronization with the output shaft, with a rigid connection, but the connection between the motor and the engine is controlled solely by a clutch. When the motor and engine need to operate in a hybrid output mode, the clutch engages, and a certain speed ratio must be maintained between the motor and the engine. This torque coupling method combines the torque of both for acceleration.
5
2
Share

Is Differential Oil the Same as Transmission Oil?

Differential oil and transmission oil are both types of gear oil. Differential oil is specifically designed for lubricating the rear differential of rear-wheel-drive vehicles, providing effective protection for the differential. Transmission oil, on the other hand, is used to maintain the cleanliness of the gear system, ensuring the proper functioning of the transmission and extending the lifespan of the drivetrain. The car differential is a mechanism that allows the left and right or front and rear drive wheels to rotate at different speeds. Its function is to enable the left and right wheels to roll at different speeds when the car is turning or driving on uneven roads, ensuring that both drive wheels perform pure rolling motion. The transmission is a device that changes the speed ratio and direction of motion, adjusting the torque, speed, and direction of motion transmitted from the drive shaft to the driven shaft under different working conditions. A gear-driven transmission typically consists of a housing and several gear pairs.
17
3
Share

What causes the squeaking noise in the Mercedes-Benz GLC suspension?

Reasons for the squeaking noise in the Mercedes-Benz GLC suspension: 1. The shock absorber itself is leaking oil or bent, and it can be directly replaced; 2. The shock absorber pressure bearing is aged or abnormally worn, and it can be directly replaced or lubricated; 3. The shock absorber spring is deformed, and it can be directly replaced; 4. It could also be due to abnormal noise from the wheel bearing, which can be directly replaced. The Mercedes-Benz GLC is a mid-size SUV under Beijing Benz. Taking the Mercedes-Benz GLC 2021 GLC 260 L 4MATIC Dynamic model as an example, its powertrain is equipped with a 2.0L inline four-cylinder turbocharged engine, with an aluminum alloy structure, a maximum power of 145kW, a maximum torque of 320Nm, and matched with a 9-speed automatic transmission.
11
0
Share

What is the reason for the ABS and skid control lights illuminating in the X-Trail?

The illumination of the ABS and skid control lights in the X-Trail is likely due to a sensor malfunction. When these warning lights are on, the ABS anti-lock braking system becomes ineffective, significantly reducing the vehicle's braking performance. It is recommended to promptly take the vehicle to a 4S dealership for inspection and repair to ensure driving safety. Additional information about the X-Trail is as follows: 1. The X-Trail inherits Nissan's consistent SUV styling, featuring bold and angular lines that give the entire vehicle a handsome appearance. Paired with 215/65R16 tires, it is particularly favored by male drivers. 2. The most notable difference in the 2004 X-Trail model is the addition of a front bumper, which creates a distinct contrast with the overall lightweight body design. The most striking feature of its exterior is the large 0.56-square-meter sunroof. The A, B, and C-pillars of the X-Trail appear robust, showcasing strong craftsmanship.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.