What Causes Body Shaking When Speed Reaches 100?

2 Answers
StFernando
07/29/25 3:56am
Here are the reasons for body shaking: 1. If the steering wheel shakes, it indicates a problem with the front wheel balance; if the body shakes, it indicates a problem with the rear wheel balance. 2. Loose fasteners in various parts of the chassis causing mechanical resonance. 3. Severe engine carbon buildup might be the cause. Here are the solutions for body shaking: 1. Perform a four-wheel alignment and balance check. 2. It could be an issue with the ignition system; inspect the condition of the spark plugs, high-voltage wires, and ignition coils. 3. Replacing the wheel rims may be necessary to completely resolve the issue.
Was this review help?
11
2
Share
DakotaMarie
08/12/25 7:43am
I've also encountered this issue when driving on the highway myself. The car body shakes violently when the speed reaches around 100 km/h. After inspection, I found that the front wheel dynamic balance wasn't properly done. Going to a repair shop to rebalance it solved the problem. Uneven tire wear or unstable tire pressure can also exacerbate the shaking. Another common cause is worn wheel hub bearings, which create significant friction vibration at high speeds. Loose suspension links or aging shock absorbers can also make the car unstable. I recommend doing some simple self-checks first: after parking, check if there's any abnormal tire wear and measure whether the tire pressure is normal. If you can't solve it yourself, quickly seek professional diagnosis at a repair shop - don't compromise driving safety. Shaking while driving not only affects comfort but may also cause accidents. Regular maintenance and checking tires and suspension can prevent many problems.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

What Causes the Noise When Raising and Lowering the Car Window?

The possible reasons for noise when raising and lowering the car window include: 1. Aging of the window seal: Aging window seals can increase friction, leading to noise during window operation. Older cars are particularly prone to this issue. 2. Dirt in the gap between the window glass and the seal: You can raise the window and rinse the gap with water, then dry it before lowering the window. Use a chopstick or an old card wrapped in a towel or cloth to clean the gap. After cleaning, dry it thoroughly and apply a small amount of lubricant. 3. Dirty window glass tracks or faulty lift motor: Cleaning the glass tracks can be done by the owner if they have some mechanical skills, as it involves removing the door panel and using cleaner and lubricant on the tracks. Alternatively, a repair shop can handle this. However, issues like seal aging or lift motor failure can only be addressed by a professional repair shop.
11
5
Share

What Does SAE Mean?

SAE is the abbreviation for the Society of Automotive Engineers in the United States, referring to the viscosity grade classification of gear oil. Below are relevant introductions about SAE: 1. Gear oil can be divided into single-grade viscosity type and multi-grade viscosity all-weather type. The single-grade viscosity type can be further categorized into high-temperature type and low-temperature type. 2. High-temperature type labels are similar to SAE90 and SAE140. The number following SAE indicates the oil viscosity at 100℃. The larger the number, the higher the oil viscosity. 3. Low-temperature type labels are similar to SAE75W. The 'W' stands for winter (low-temperature type), and 75 represents viscosity. The smaller the number, the better the low-temperature performance. 4. Multi-grade viscosity all-weather type labels are similar to SAE80W/90. The number before the slash indicates the low-temperature viscosity performance in winter—the smaller the number, the lower the low-temperature viscosity, resulting in better fluidity and enhanced low-temperature resistance. The number after the slash represents the high-temperature viscosity performance—the larger the number, the higher the high-temperature viscosity, providing better high-temperature resistance.
13
0
Share

How to Maintain Electric Vehicle Batteries?

Maintenance measures and precautions for automotive batteries are as follows: 1. Keep the battery clean and dry at all times, ensuring the vent holes are unobstructed. If oxides appear on the plates or terminals, clean them off and apply a small amount of grease to prevent corrosion. 2. Avoid continuous use of the starter motor. Each use should not exceed 5 seconds, with a rest period of 10-15 seconds between two starts. In severe winter, the battery discharge level should not exceed 25%, and in summer, it should not exceed 50%. 3. Batteries filled with electrolyte should not be left unused for long periods without sufficient charging. Regular charging is necessary; otherwise, it may lead to battery failure. 4. When charging the battery, ensure the voltage is neither too low nor too high. Generally, the standard charging voltage for a 12V battery is within the range of (13.5~14.5)V, and for a 24V battery, it is within (28~29.9)V. 5. The electrolyte level should be (10~15)mm above the plates. If the level is too low, promptly replenish it with distilled water—do not add more electrolyte. If distilled water is unavailable, rainwater or snowmelt can be used as a substitute. Avoid using river water or tap water.
6
4
Share

How Often Should a Major Car Maintenance Be Performed?

Major car maintenance is typically performed every three years or 60,000 kilometers. Additional information about major car maintenance is as follows: 1. Major maintenance primarily involves replacing more parts and fluids. The required inspections include checking all vehicle fluids, such as brake fluid, coolant, power steering fluid, and transmission oil. Additionally, tasks like carbon deposit removal, battery replacement, spark plug replacement, and timing belt replacement are also addressed. For turbocharged engine vehicles, the primary focus is on carbon deposit removal. Excessive carbon deposits can lead to reduced engine power, difficulty starting, increased fuel consumption, and even engine stalling, making it a critical aspect of major maintenance. Battery maintenance is also important, as modern cars are equipped with numerous electronic devices that consume significant battery power. Forgetting to turn off the air conditioning after shutting off the engine can drain the battery, so regular battery checks are essential. 2. Car owners should also develop daily maintenance habits. Daily maintenance includes pre-drive, during-drive, and post-drive checks, summarized as: cleaning, tightening, inspecting, and replenishing. Regular daily maintenance helps keep the vehicle in optimal condition while allowing owners to monitor the technical status of various components, preventing mechanical failures and accidents.
15
3
Share

How to Switch Between D and S Gears in a Car?

In an automatic transmission car, you can directly switch between D (Drive) gear and S (Sport) gear. When overtaking, shift directly from D gear to S gear and accelerate to overtake. After completing the overtaking, shift back directly from S gear to D gear. 1. P stands for Parking gear. When the car is parked and not in use, the gear is in this position, where the wheels are mechanically locked to prevent rolling. 2. R stands for Reverse gear, used when backing up the car. 3. N stands for Neutral gear, used for temporary stops (e.g., at a red light). 4. D stands for Drive gear, also known as the forward gear, used when moving forward. 5. L stands for Low gear, used when driving downhill. 6. S stands for Sport mode, used for high-speed driving.
15
1
Share

Which region does the license plate prefix 'Ji' belong to?

There is no license plate number starting with 'Yi'. It should be 'Ji', which is the license plate prefix for Hebei Province. The abbreviation for Hebei Province is 'Ji', and all vehicle license plates in Hebei Province start with the character 'Ji'. The license plate codes range from JiA to JiT. Here is an introduction to license plate numbers: 1. The Chinese character at the beginning of a license plate number represents the province. 2. The following letter represents different cities. Here is an introduction to Hebei license plate numbers: Hebei license plate numbers are distinguished as follows: Hebei Province (Ji) JiA Shijiazhuang, JiB Tangshan, JiC Qinhuangdao, JiD Handan, JiE Xingtai, JiF Baoding, JiG Zhangjiakou, JiH Chengde, JiJ Cangzhou, JiR Langfang, JiT Hengshui.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.