What Causes Black Smoke from the Engine?

2 Answers
Chloe
09/05/25 4:42am
The causes of black smoke from the engine are: 1. Vehicle overload or engine overload; 2. Insufficient cylinder pressure, engine temperature too low; 3. Improper carburetor adjustment; 4. Clogged air filter element; 5. Individual cylinders not working and ignition timing too late; 6. Intake and exhaust valves not sealing tightly, poor compression of combustible gas, worsening combustion, and increased smoke levels. The solutions for black smoke from the engine are: 1. Use high-quality fuel or fuel additives; 2. Regularly clean the fuel lines; 3. Keep the air filter clean and replace it periodically; 4. If the fuel filter is damaged, replace the solenoid valve promptly.
Was this review help?
1
0
Share
LeCaroline
09/17/25 5:10am
My car also had the issue of emitting black smoke. That time, it was due to an incorrect air-fuel mixture ratio in the engine, where too much fuel was injected while insufficient air entered, possibly because the air filter was clogged or the fuel injector was faulty. Another reason could be problems with the ignition system, such as aged spark plugs failing to ignite, leading to incomplete combustion of fuel and resulting in black smoke. I also encountered issues with poor cylinder sealing, where worn piston rings allowed oil to mix into the combustion chamber. Emitting black smoke not only increases fuel consumption but may also cause more severe damage to the engine. My advice is to promptly check the air filter and fuel injection system. If you're not confident in handling it yourself, take it to a repair shop for a comprehensive inspection—don't wait until the engine is ruined, as repairs can be costly. Always pay attention to the engine sound while driving; early detection and resolution can prevent breakdowns on the road.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

Where is the oil filter of Chery Tiggo 8 located?

The oil filter of Tiggo 8 is located in front of the oil pump under the engine. The functions of the oil filter are: 1. Filter out impurities, colloids, and moisture from the engine oil; 2. Deliver clean oil to various lubrication points; 3. Extend the service life of the engine. The dimensions of the Tiggo 8 are: length 4700mm, width 1860mm, height 1746mm, with a wheelbase of 2710mm, a fuel tank capacity of 81.4 liters, and a trunk capacity of 889 liters. The Tiggo 8 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a turbocharged engine, delivering a maximum horsepower of 156ps, a maximum power of 115kw, and a maximum torque of 230nm, paired with a 6-speed manual transmission.
8
1
Share

Do Cars in Hong Kong Drive on the Left or Right?

Due to historical reasons, Hong Kong follows left-hand traffic rules, while mainland China follows right-hand traffic. Below is a detailed explanation of why Hong Kong drives on the left: 1. Historical Origins: People used to mount horses with their left foot first, stepping onto the stirrup before swinging their right leg over, naturally positioning themselves on the left side of the road. Additionally, knights often engaged in duels for honor or love, wielding weapons in their right hand and holding shields and reins in their left. To strike opponents effectively, they naturally rode on the left. 2. Historical Context: Hong Kong follows left-hand traffic rules, while mainland China follows right-hand traffic. Thus, after Hong Kong's return to China in 1997, the "one country, two systems" principle was applied to road traffic regulations. Mainland vehicles entering Hong Kong must follow left-hand driving rules, while Hong Kong vehicles entering the mainland must adapt to right-hand driving.
1
1
Share

What is the method of shifting gears without depressing the clutch?

The method of shifting gears without depressing the clutch is: 1. For upshifting, the sequence is to release the throttle, disengage the gear, wait for the engine speed to drop, and then engage the higher gear; 2. For downshifting, the sequence is to release the throttle, disengage the gear, rev the throttle to increase the engine speed, and then engage the lower gear. The working principle of the clutch is: 1. When the inner race is fixed, the outer race rotates clockwise and the wedge does not lock, allowing the outer race to rotate freely; 2. When the outer race rotates counterclockwise, the wedge locks, preventing the outer race from rotating. The functions of the clutch include: 1. Gradually increasing the driving force of the car to ensure a smooth start; 2. Temporarily separating the engine and transmission for gear shifting; 3. Preventing overload in the transmission system; 4. Reducing torsional vibration and shock from the engine, thereby extending the lifespan of the transmission gears.
7
2
Share

What primarily provides power to a car?

The car's power supply system mainly consists of the battery, generator, and voltage regulator. The generator is responsible for charging the battery, keeping it fully charged over time. Both the battery and generator supply power to all the vehicle's electrical components. Below is relevant information: 1. Battery: It can be divided into traditional lead-acid batteries and maintenance-free batteries. Since the battery uses lead-calcium alloy for the grid frame, the amount of water decomposed during charging is minimal, and water evaporation is low. 2. Generator: It is the main power source of the car. Its function is to supply power to all electrical devices (except the starter) when the engine is running normally (above idle speed), while also charging the battery. 3. Voltage regulator: Since the generator is driven by the car's engine, and the engine speed is not constant, this can cause instability in the generator's output voltage. Therefore, an electronic device is necessary to control the generator.
15
1
Share

What is the displacement of the Audi Q2?

Audi Q2 displacement is 1.4t. The following is an introduction to the body dimensions and configuration of the Audi Q2: Audi Q2 body dimensions: The length, width, and height of the body are: 4236mm, 1785mm, 1548mm, the wheelbase is 2628mm, the minimum ground clearance is 142mm, the fuel tank capacity is 50l, the luggage compartment volume is 347l, and the body weight is 1405kg. Configuration introduction: The front suspension of the Audi Q2 is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 1.4t turbocharged engine, with a maximum horsepower of 150ps, a maximum power of 110kw, a maximum torque of 250nm, and is matched with a 7-speed dual-clutch transmission.
19
5
Share

What Causes the Abnormal Noise in Subaru Compressors?

Subaru compressor abnormal noise causes are as follows: Electromagnetic clutch contamination: Since the electromagnetic clutch is positioned relatively close to the ground, years of vehicle operation can cause it to accumulate sewage or mud, leading to internal bearing damage and resulting in abnormal noise. Drive belt looseness: The car air conditioning compressor has high operational requirements for the electromagnetic clutch. A loose drive belt increases the load on the electromagnetic clutch, making it prone to damage, and in severe cases, may cause compressor burnout. Repeated engagement of electromagnetic clutch: Frequent engagement of the electromagnetic clutch leads to insufficient generator output, causing inadequate working voltage for the compressor and resulting in abnormal noise. Lack of lubricating oil: Insufficient lubricating oil inside the compressor. After prolonged use, appropriate lubricating oil should be added to avoid abnormal noise or scrapping due to friction.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.