What Causes Automatic Transmission Clutch Plate Burning?

Is a Car with Water in the Engine Considered a Flood-Damaged Vehicle?

Water in the engine does indicate a flood-damaged vehicle. However, the definition of a flood-damaged vehicle does not necessarily require water in the engine. The biggest issue with flood-damaged vehicles is wiring problems. Cars are equipped with various electronic devices, and if the wiring corrodes or rusts after being submerged, all functions can be affected, making the car undrivable. Classification of Flood-Damaged Vehicles: Generally, flood-damaged vehicles can be categorized into three types based on the extent of damage: water level exceeding the wheels, causing water accumulation at the vehicle's floor mat area; water soaking the seats or rising above the dashboard; and water directly submerging the entire car body. How to Identify a Flood-Damaged Vehicle: After a flood-damaged vehicle has been cleaned, it's not easy to tell from the exterior whether it's flood-damaged. Flood-damaged vehicles mainly undergo repairs for water-affected components, rarely involving bodywork. For example, if the headlights or taillights have water inside, the solution is to replace them or drain the water. Similarly, water inside the car is removed, and wet components are either disassembled and dried or simply left to dry. In fact, flood-damaged vehicles are relatively easy to distinguish because even after thorough cleaning, they tend to emit a musty odor. Additionally, the trunk is a critical area—if there's significant rust, it's highly likely the car has been submerged in water.

5

3

Share

Will the Coach Be Present During the Subject 2 Driving Test?

During the Subject 2 driving test, the coach will not be present in the car. Nowadays, the test is generally conducted electronically, with a small computer display screen in the passenger seat, and the examinee is alone in the car during the test. The entire Subject 2 test is monitored by a computer system, with only the examinee inside the car and no examiner present. There is a monitoring camera on the right front side, and the test administrators from the vehicle management office observe the test through the monitoring system in the office. Reasons why the coach does not sit in the car during the Subject 2 test: During practice sessions, the coach sits in the car and promptly points out any mistakes, which can create a sense of dependency in the student. However, the test is conducted independently on the test field, with no coach or examiner in the passenger seat. This is to encourage the student to learn independent driving skills and reduce reliance on the coach. It helps students improve their ability to drive independently. Important notes for the Subject 2 test: After getting into the car, first adjust the seat to a comfortable position and then adjust the rearview mirrors to your preferred angle. Turn signals must be used when starting, exiting a parallel parking space, starting on a slope, and during right-angle turns according to the new standards. The turn signal must remain on for at least 3 seconds; otherwise, it will result in an immediate failure. When shifting gears or starting on a slope, properly engage the clutch and brake to prevent the car from stalling or rolling backward. During curve driving and reverse parking, coordinate reference points with the vehicle speed, constantly observe changes in the car's position, and make timely adjustments to the steering wheel. Steering should be decisive and swift, with accurate judgment. If the car is moving too fast, lightly press the clutch to control the speed and reduce errors.

13

2

Share

What does the one-pedal mode of new energy vehicles mean?

One-pedal mode means that the driver can control the acceleration and deceleration of the vehicle with a single accelerator pedal. Pressing the pedal accelerates the vehicle, while lifting the pedal applies braking, with the braking force increasing linearly as the pedal is lifted. Here are the details: The function of one-pedal mode: When the accelerator is released, the wheels drive the motor to rotate, enabling energy recovery and reducing power consumption. At the same time, the resistance applied to the wheels is much greater than that of free coasting, achieving a braking effect. Advantages of one-pedal mode: Simplifies driving by significantly reducing the frequency of right-foot operations; makes kinetic energy recovery controllable, improving energy efficiency; reduces wear on brake pads.

5

0

Share

How many factories does BMW have in China?

Currently, BMW has two joint ventures in China, with a total of four factories. Two of them are under construction, and two are already in operation. More extended information is as follows: Brilliance BMW: Brilliance BMW is no stranger to many. This joint venture was established in 2003 by German BMW and Brilliance Auto, with the two companies holding 25% and 75% of the shares, respectively. The cooperation period is 25 years, lasting until 2028. Spotlight Automotive: Spotlight Automotive is a joint venture established in 2019 by BMW (Netherlands) and Great Wall Motors, with each party holding 50% of the shares. The cooperation period is 15 years, lasting until 2034. The collaboration mainly focuses on the field of new energy vehicles.

2

4

Share

Can a car be lent to a friend?

It is not advisable to lend a car to a friend. It is illegal to lend a car to someone without a driver's license, and doing so may result in fines. The lender's motor vehicle driving license may also be revoked; even if the borrower has a valid driver's license, caution is still necessary, as the lender may bear corresponding liability in the event of a traffic accident. Regulations: Driving a motor vehicle without obtaining a motor vehicle driving license, or when the license has been revoked or temporarily suspended; handing over a motor vehicle to someone who has not obtained a motor vehicle driving license or whose license has been revoked or temporarily suspended. Driver's license suspension: If a motor vehicle driver accumulates 12 penalty points, refuses to participate in the study session notified by the traffic management department of the public security organ, and also refuses to take the required test, the traffic management department of the public security organ will announce the suspension of their motor vehicle driving license.

1

4

Share

What Causes Plastic Interior Rattling?

Plastic interior rattling reasons: It may be due to prolonged use of the vehicle, causing aging of internal components, which leads to the rattling noise. Introduction to automotive interiors: What is referred to as automotive interiors in China is actually the Interiors System in English. Since this category of automotive components possesses certain decorative qualities, the industry commonly translates it as "automotive interiors." However, from the English term "Interiors," it's clear that these components are not just decorative; they also encompass a wide range of functional, safety, and engineering attributes. Classification of automotive interiors: Automotive interiors mainly refer to the products used for internal modifications of vehicles, covering all aspects of the car's interior. Examples include steering wheel covers, seat cushions, floor mats, car perfumes, hanging accessories, interior decorations, storage boxes, etc., all of which fall under automotive interior products.

4

0

Share

What Causes Automatic Transmission Clutch Plate Burning?

Is a Car with Water in the Engine Considered a Flood-Damaged Vehicle?

Will the Coach Be Present During the Subject 2 Driving Test?

What does the one-pedal mode of new energy vehicles mean?

How many factories does BMW have in China?

Can a car be lent to a friend?

What Causes Plastic Interior Rattling?

Will the fuel in a motorcycle tank evaporate when exposed to sunlight?

How to Reset the Tire Pressure Monitoring Indicator on Volkswagen Bora?

What are the new regulations for heavy-duty diesel vehicles?

Is BMW a Joint Venture Car?