What Causes Automatic Car Door Unlocking?

1 Answers
DiClaire
07/30/25 5:27am
Possible reasons include one of the four doors not being properly closed when locking the car, or the trunk not being fully shut. For most vehicle models, if any door isn't properly closed, the car won't fully lock. Other reasons are as follows: 1. When locking, the doors appear closed and locked but aren't fully secured. In this case, even if the lock button is pressed, the doors won't lock. 2. After locking, other objects in your pocket within the remote's range might accidentally press the unlock button. Many people bundle car keys with other keys, making this scenario quite common. 3. Smart key settings. Some vehicle keys have separate functions for locking only the driver's door or all doors, so it's important to check which function is activated when locking. 4. Due to smart key configuration, which uses advanced RFID technology to automatically lock/unlock doors based on the proximity of the key's smart chip. When the owner approaches within a certain distance, doors automatically unlock; when moving away, they automatically lock.
Was this review help?
8
1
Share
More Forum Discussions

Which Gear Should Be Used for Climbing Hills in a Car?

For manual transmission cars, you can use 2nd or 3rd gear when climbing hills. For automatic transmission cars, you can use the S (Sport) or L (Low) gear, or simply the D (Drive) gear. Climbing hills requires greater torque, so it's necessary to keep the transmission in a lower gear to increase the wheel torque. There are three common types of automatic transmissions in cars: dual-clutch transmission (DCT), continuously variable transmission (CVT), and automatic transmission (AT). 1. The dual-clutch transmission is a product developed based on manual transmission, with a structure similar to manual transmission. The dual-clutch transmission simply adds an extra set of clutches and a shift control mechanism compared to manual transmission. One clutch in the dual-clutch transmission controls the odd-numbered gears, while the other controls the even-numbered gears. 2. The AT transmission is the most mature and widely used automatic transmission. Inside the AT transmission, there are many planetary gears, which are responsible for changing speed and torque. The AT transmission is connected to the engine via a torque converter. 3. The CVT transmission is a relatively simple automatic transmission in structure, consisting of only two cone pulleys and a steel belt. The steel belt in the CVT transmission can move along the cone pulleys, allowing the transmission to change speed and torque.
2
4
Share

What are the characteristics of German cars?

Here are the advantages of German cars: 1. The appearance is stable and elegant. Suitable for both family and commercial use. 2. Excellent NVH performance, giving the car a high-quality feel. 3. German cars have a long history of development, with ample experience and advantages in traditional engine technology. The three major luxury brands often mentioned by Chinese people—BB (Mercedes-Benz, BMW, Audi)—are all German cars. 4. Technologically very advanced. For example, turbocharging technology and dual-clutch transmission technology were popularized by German cars. 5. The design is relatively rigorous and scientific, with reliable quality. 6. Good performance and handling.
10
3
Share

What is the difference between Continental MC5 and TC6?

The differences between Continental MC5 and TC6 include their main performance focus, tread patterns, and advantages. Below are the detailed comparisons between Continental MC5 and TC6: 1. Different Main Performance Focus: Continental TC6 emphasizes quiet performance and grip capability, designed for uneven road conditions; Continental MC5 focuses on tire handling and stability performance. 2. Different Tread Patterns: Continental TC6 adopts a diamond chamfer tread pattern; Continental MC5 uses an asymmetric tread pattern. 3. Different Advantages: Continental TC6 delivers excellent handling performance at high speeds, ensuring even force distribution on the tire contact surface during turns for high-speed stability; Continental MC5 allows the vehicle to maintain closer contact with the ground during driving, enhancing tire grip. The inner fine tread blocks have lower rigidity, effectively reducing noise generated when the tread blocks collide with road surfaces.
1
3
Share

How to Determine if a Car's Charcoal Canister is Damaged?

Fuel pump nozzle tripping during refueling, or gas spraying out when opening the fuel tank cap; weak acceleration, jerking, unstable idle speed fluctuating between high and low are all symptoms indicating a damaged charcoal canister. Below is relevant information about the charcoal canister: 1. The gasoline vehicle fuel vapor adsorption and desorption device, commonly known as the "charcoal canister", is a device that reduces the emission of gasoline vapors from the car's fuel tank and carburetor. The charcoal canister is usually installed between the fuel tank and the engine. Since gasoline is a highly volatile liquid, the fuel tank is often filled with fuel vapor at normal temperatures. The fuel evaporation emission control system's function is to direct these vapors into the combustion process and prevent them from evaporating into the atmosphere. 2. Modern vehicles' fuel tanks are designed to work with the charcoal canister in a fully sealed fuel tank system. However, gasoline has a high coefficient of thermal expansion and strong volatility. Therefore, based on the breathing effect in coordination with the charcoal canister, when the vehicle is stationary, the fuel in the tank volatilizes, and the vapor enters the charcoal canister's evaporation zone through piping. It is immediately adsorbed by activated carbon, condensed, and reduced back into fuel. Any excess gas is expelled through the breathing port. In practical use, as long as the charcoal canister is not flooded, this cycle can continue indefinitely. The most crucial point is not to overfill the fuel tank.
13
1
Share

Where is the cabin air filter located in the Beidou x5?

The cabin air filter in the Beidou x5 is located beneath the interior air conditioning panel, at the air intake grille position. To access it, lift the engine hood, remove the fixed scupper clips and the scupper, and you will see the cabin air filter. Below is additional information about the cabin air filter: 1. Functions of the cabin air filter: Adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air; provides strong and long-lasting moisture absorption; ensures clean cabin air free from bacterial growth, creating a healthy environment; effectively separates solid impurities like dust, powder, and abrasive particles from the air; and efficiently blocks pollen to prevent allergic reactions in drivers and passengers that could affect driving safety. 2. The cabin air filter helps prevent dust and particulate matter from entering. Activated carbon series cabin air filters utilize the physical properties of granular activated carbon to adsorb other microscopic particles and more harmful substances from the air in the short time the air passes through. Therefore, activated carbon series cabin air filters perform significantly better than standard filters. The recommended replacement interval for cabin air filters is generally every 8,000-10,000 kilometers driven, but this can vary based on the external driving environment. If the environment has significant humidity variations, is consistently dry, or has high levels of windblown sand, the filter should be replaced earlier.
8
4
Share

What are the reasons for the non-illumination of the Changan CS55 air conditioning screen?

Here are the specific reasons why the air conditioning display screen of the Changan CS55 does not light up: 1. Power supply abnormality: Check whether the power supply of the display screen is normal. If the power supply is abnormal, replace the power supply module. 2. Poor contact: Check whether the cable connection is good. If the line connection is poor, it is necessary to promptly check whether there is a loose connection in the line, which causes the central control screen to go black. Simply reconnect the loose part properly. 3. Display screen damage: Check whether the display screen is damaged. Replace the display screen for testing. If it returns to normal, the display screen is damaged. If the power supply is normal and the cable connection is good, check the video output signal of the motherboard and replace the motherboard for testing.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.