What Causes Acceleration Shaking?

1 Answers
DeStella
07/24/25 7:44pm
Acceleration shaking is caused by excessive carbon buildup in the throttle body, intake tract, and valve areas, which leads to an overly rich air-fuel mixture during engine idling, resulting in unstable idle. Solutions for acceleration shaking: 1. Severe carbon buildup in the engine or idle control valve - clean the fuel system; 2. Ignition system issues - check if spark plugs have excessive carbon buildup and replace them if necessary; 3. Unstable fuel pressure - inspect fuel pressure and replace corresponding components; 4. Aging engine components - replace worn parts. Functions of the engine: 1. Fully burn the fuel introduced into the cylinders to generate power; 2. Determine the vehicle's power performance, fuel economy, stability, and environmental friendliness.
Was this review help?
9
0
Share
More Forum Discussions

What Happens When the ABS Sensor Fails?

If the ABS sensor fails, the ABS function will be lost, meaning that if the vehicle has a stability control system, it will also stop working. When the ABS is not functioning, during emergency situations or hard braking, the vehicle's wheels may lock up, causing the car to skid uncontrollably. However, under normal driving conditions, the fault may not be noticeable. The ABS system has a self-diagnostic feature that monitors its operation. If it detects any faults that affect normal operation, it will automatically shut down the ABS, illuminate the ABS warning light, and alert the driver. The most common cause of ABS failure is a faulty wheel speed sensor. These sensors are typically mounted on the wheels and can easily become covered with dirt, which interferes with the transmission of speed signals. As a result, the ABS computer cannot accurately determine the vehicle's speed. Cleaning the dirt from the tires and adjusting the gap between the sensor and the signal ring can usually resolve the issue.
2
1
Share

What Causes the Abnormal Noise When a Car Goes Over Speed Bumps?

The abnormal noise when a car goes over speed bumps is caused by aging rubber in the chassis. Replacing the rubber components can resolve the issue. The chassis refers to the combination of four systems in a vehicle: the transmission system, the running gear system, the steering system, and the braking system. It supports and mounts the engine and other components, forming the overall structure of the vehicle, bearing engine power, and ensuring normal operation. The transmission system mainly consists of the clutch, gearbox, universal joint, drive shaft, and drive axle. The running gear system is composed of the frame, axle, suspension, and wheels. The steering system includes the steering wheel, steering gear, steering knuckle, steering arm, tie rod, and drag link. The braking performance of a motor vehicle refers to its ability to come to a forced stop within a short time.
7
2
Share

Must license plates be installed on the same day they are received?

License plates must be installed on the same day they are received. According to Article 10.2 of the Public Safety Industry Standard GA36-2018 of the People's Republic of China, paper material license plates (temporary plates) become invalid on the day after the metal license plates are collected. When official license plates arrive by mail, users are required to mount the official plates on the same day. In fact, the legal purpose of temporary plates is 'for temporary use before obtaining official license plates.' If temporary plates continue to be used after receiving official license plates, it violates the 'Road Traffic Safety Law of the People's Republic of China.' This constitutes driving a motor vehicle on the road without displaying license plates. If caught, the traffic management department of the public security authorities shall impound the vehicle, notify the party to provide the corresponding plates, and impose a fine and deduct 12 points in accordance with Article 90. Laws and regulations: According to Order No. 123 of the Ministry of Public Security of the People's Republic of China, driving a motor vehicle on the road without displaying license plates, or intentionally obscuring, damaging, or failing to install them as required, will result in a 12-point deduction. According to Article 95 of the 'Road Traffic Safety Law of the People's Republic of China,' driving a motor vehicle on the road without displaying license plates may result in a warning or a fine. While waiting for the issuance of official license plates, we must pay attention to the validity period of temporary plates. According to the 'Motor Vehicle Registration Regulations': For ordinary consumers purchasing new cars for temporary use within their administrative region, temporary plates with a validity period not exceeding 15 days will be issued; for those needing to travel across administrative regions, temporary plates with a validity period not exceeding 30 days will be issued. If the vehicle owner needs to apply for temporary plates multiple times, the vehicle management office may issue temporary plates no more than three times. Generally, consumers can obtain three temporary plates. Owners driving locally can theoretically use temporary plates for up to 45 days, while those with cross-regional requirements can use them for up to 90 days. Vehicle owners should complete vehicle registration as soon as possible after purchase to allow time for installing official license plates.
3
1
Share

Where is the Monpac air conditioning filter located?

The Monpac air conditioning filter is located at the intake port in the right rear corner of the engine compartment. It can be cleaned or replaced separately. The air conditioning filter can absorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc. from the air, and has strong and long-lasting moisture absorption capacity. The Monpac is a high-end multi-purpose vehicle positioned as a passenger car model, featuring a sedan-style chassis that emphasizes ride comfort while maintaining the load-bearing performance required for this type of vehicle. In terms of powertrain, the vehicle offers two different engine options: diesel and gasoline, with gasoline engine displacements ranging from 2.4L to 3.0L.
5
3
Share

How to Distinguish Between Dry and Wet Dual-Clutch Transmissions?

Distinguishing between dry and wet dual-clutch transmissions can be done through the following methods: 1. Different clutch plate immersion methods: The clutch plates in a dry dual-clutch transmission are not immersed in transmission oil, whereas those in a wet dual-clutch transmission are immersed in transmission oil. 2. Different shifting speeds: Dry dual-clutch transmissions have faster shifting speeds compared to wet dual-clutch transmissions. Additionally, wet dual-clutch transmissions can withstand higher torque than dry dual-clutch transmissions. Wet dual-clutch transmissions are typically paired with more powerful engines, and vehicles equipped with such engines usually use wet dual-clutch transmissions.
6
2
Share

How many questions are there in the Subject 1 exam?

The Subject 1 exam for a driver's license consists of 100 questions. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the exam includes single-choice questions and true/false questions, with each question worth 1 point, totaling 100 points. If a candidate answers 11 questions incorrectly during the exam, the system will automatically submit the test and end the exam. Subject 1, also known as the theoretical exam or driver's theory test, is part of the motor vehicle driver's license assessment. The exam content covers driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The exam is conducted on a computer, with a time limit of 45 minutes. Subject 1 exam content: Regulations on driver's licenses and motor vehicle management; road traffic conditions and rules; road traffic safety violations and penalties; regulations on road traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 exam precautions: Candidates should dress appropriately for the exam; no slippers are allowed. Electronic devices and bags are prohibited in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the exam room. At the identity verification station, candidates will be assigned a seat. Once seated, begin the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it. Failure to sign renders the result invalid. There is no limit to the number of times you can reschedule the Subject 1 exam. Each subject can be taken once, with one retake allowed if you fail. If you do not take the retake or fail it, the exam process ends, and you must reschedule. For Subjects 2 and 3, there are only five exam attempts. Subjects 2 and 3 can be rescheduled after ten days. If you fail the Subject 3 safe driving knowledge test, your passing score for the road driving skills test remains valid. Steps to schedule the Subject 1 exam online: Open the Comprehensive Traffic Safety Service Management Platform and select your province/city. Choose "Exam Scheduling." Click "Register Now." Fill in user information: Enter your ID number and the phone number used during registration. Select user type: Choose "First-time applicant for a motor vehicle driver's license." Enter the SMS verification code. Read and agree to the terms and conditions, then click "Next." Confirm the information is correct and click "Next." Exam scheduling: Select the exam subject, test location, and scheduling period. Enter the image verification code and click "Next." Select the date and session: The system offers two scheduling modes—self-selecting exam sessions or allowing the system to arrange sessions. After selecting, click "Next" to confirm submission. Confirm submission and review the information again. If correct, click "Complete." Upon successful submission, the system generates a transaction number. The exam schedule will be announced on the result announcement date. There are three subjects in the driver's license exam: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test. Subject 2 refers to the field driving skills test. Subject 3 consists of two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (under the Ministry of Public Security's Order No. 123) does not include "Subject 4."
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.