What Causes Abnormal Noises from the Supercharger?

2 Answers
KiaraFitz
08/28/25 2:04am
The reasons for abnormal noises from the supercharger are: 1. Damage to the turbocharger, causing abnormal noises due to metal friction; 2. Air leaks in the intake or exhaust pipes, or cracks in the intercooler, leading to pressurized gas leakage; 3. Rupture of the bypass valve diaphragm, resulting in gas leakage; 4. Burrs or protrusions on the inner wall of the housing, causing abnormal noises when high-speed airflow passes through; 5. Accumulation of dirt in the diffuser section of the turbocharger; 6. Dirt buildup on the impeller surface, obstructing smooth airflow. A supercharger is an air compressor that increases air intake by compressing air. It utilizes the inertial force of exhaust gases from the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller then pressurizes the air delivered through the air filter pipe, forcing it into the cylinders.
Was this review help?
3
1
Share
Clyde
09/09/25 7:32am
I've noticed that superchargers making abnormal noises is quite a common issue, mainly caused by bearing wear or insufficient lubrication. My own car had a similar problem before, producing sounds like grinding or squealing, especially more noticeable during acceleration. At that time, I checked the oil level and found it was a bit low. After topping it up, the situation improved. However, if the noise persists, more attention is needed. For instance, foreign objects might be stuck in the turbine blades, or there could be a leak in the exhaust system, both of which can generate noise. Additionally, if the oil pump isn't functioning properly, it can also put a strain on the supercharger. I suggest not pushing the car too hard; instead, stop to check the oil condition and promptly visit a professional shop for inspection. Regular maintenance is crucial, such as changing the oil and air filter every 5,000 kilometers, which can effectively prevent such issues. If the turbocharger fails, it affects the engine's power, and replacing it can be costly. Addressing the problem early saves money and ensures safety.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

What is the maintenance and calibration process for Honda's millimeter-wave radar?

Honda's millimeter-wave radar maintenance and calibration can adopt the internal calibration method. The internal calibration method refers to measuring the amplitude and phase errors of components such as transceiver modules, frequency conversion modules, and intermediate frequency receivers within the radar system through calibration networks, monitoring networks, or instrument equipment, and then performing calibration based on the measurement results. The following is an introduction to the internal calibration method: 1. The internal calibration method can be further divided into static methods and real-time methods. The static method refers to calibrating the system when the radar system is not in normal operation or before it starts working, with common methods such as network analyzer testing. 2. When using the static method for measurement, the system cannot operate normally. For radar systems, their characteristic parameters during normal operation differ significantly from those in static conditions. Moreover, with changes in operating time and environment, especially variations in operating temperature, the amplitude and phase characteristics of the transceiver channels will change. Therefore, the measurement accuracy of the static method is limited. Developing a calibration network with real-time measurement and calibration capabilities is of great significance for ensuring the long-term reliability and stability of W-band radar systems.
13
2
Share

How to Check How Many Cars Are Registered Under Your Name?

To check the vehicles registered under your name, you need to bring your ID card to the local vehicle management office. Below are the methods for checking different types of vehicles: 1. For different types of vehicles: For private vehicles, provide the original and a copy of the vehicle owner's ID card; for company vehicles, provide the original and a copy of the organization code certificate, a power of attorney from the legal representative, and the original and a copy of the handler's ID card. 2. For administrative authorities: Law enforcement agencies such as inspection and legal departments can check vehicle information with an official letter of introduction, the original and a copy of the handler's work certificate. Only specific authorities, specific individuals, and through specific strict procedures can access this information. The vehicle registration information network of the transportation department is only open internally and cannot be publicly queried online.
17
1
Share

Where is the Nissan Livina's cabin air filter located?

The cabin air filter of the Livina is located under the dashboard, inside the trim panel in front of the passenger seat. The Livina is a compact car designed by Nissan, with competitors mainly including the Polo, Fit, and similar models. Poor maintenance of the cabin air filter can lead to the accumulation of dust and dirt on the filter plate, radiator, evaporator, and fin surfaces, causing airflow blockage. Additionally, your air conditioning system may experience reduced cooling and heating efficiency, increased power consumption, noise, and a shortened lifespan. Here is some additional information: Cabin Air Filter: Generally, the car's cabin air filter should be replaced every 10,000-15,000 kilometers or once a year. It is often replaced after the Spring Festival because the cabin air filter is used more frequently during winter and summer. Replacing it at this time helps address pollen dispersal in spring, as some people are sensitive to pollen or willow catkins. High-quality cabin air filters can effectively filter pollen, allowing you to use the air conditioning in the car without worrying about pollen or willow catkins entering the cabin.
3
0
Share

How many points will be deducted for riding a motorcycle without a vehicle license?

Riding a motorcycle without a vehicle license will result in a 12-point deduction from the C1 driver's license. Required documents for motorcycle inspection exemption: Application form, owner's ID card (if handled by an agent, a power of attorney and the agent's original ID card are required); original copy of the compulsory traffic accident liability insurance (retained by the public security department); original vehicle license; proof of vehicle and vessel tax payment or tax exemption. Required documents for motorcycle annual inspection: Copy of compulsory traffic insurance, ID card of the owner or agent; vehicle documents (driver's license, vehicle license, insurance, road transport permit, professional qualification certificate) and road and bridge card; clearance of traffic violations, etc.
15
4
Share

Symptoms of a Bad Valve Stem Seal?

Symptoms of a bad valve stem seal are as follows: 1. The engine burns oil, emitting blue smoke. 2. Severe carbon buildup on the spark plugs, resulting in decreased engine power. 3. Reduced sealing leads to insufficient cylinder pressure, causing a drop in engine power. 4. Accelerated oil consumption, and in severe cases, directly causing engine seizure due to lubrication and cooling failure. Reasons for valve stem seal damage are as follows: 1. Incorrect alignment of threads or splines during assembly, where misaligned parts may leak oil due to poor sealing. 2. The tightness of the spring does not meet the technical requirements. Too tight can cause improper fit between the seal and the rotating shaft, leading to abnormal wear; too loose can result in insufficient pressure to maintain a tight seal, failing to achieve the desired sealing effect.
12
3
Share

What should be paid attention to during the break-in period of CFMOTO 250nk?

During the break-in period of CFMOTO 250nk, it is necessary to pay attention to controlling the engine speed, avoiding climbing hills, and performing reasonable maintenance. Motorcycle riding tips: Before riding, check the condition of the motorcycle, including whether the headlights, turn signals, horn, and handlebars are normal; helmets are legally required protective gear, choose brightly colored clothing, and strictly prohibit drunk driving and unlicensed driving. Driving precautions: Drive on the right side and not on the sidewalk. Do not follow too closely, but follow at the right rear corner of the vehicle in front and maintain an appropriate distance; when overtaking, pass from the left side of the vehicle in front, and avoid overtaking on the right side or between two parallel vehicles.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.