What Causes Abnormal Noise in the Exhaust Pipe?

2 Answers
LeAaliyah
07/28/25 8:56pm
The causes of abnormal noise in the exhaust pipe are: 1. The mixture concentration is too high, and the unignited mixture enters the exhaust pipe and encounters fresh air, causing backfire; 2. Poor valve sealing, resulting in incomplete combustion; 3. Some exhaust valves are eroded or have poor sealing; 4. Carbon deposits at the contact surfaces between some intake and exhaust valves and their seats; 5. Some valve lifters have no clearance, or the two idle holes of the dual-barrel carburetor are unevenly adjusted or clogged; 6. The exhaust pipe is damaged, unable to muffle noise or purify exhaust. The maintenance methods for the exhaust pipe are: 1. Avoid water entering the muffler when driving in the rain or washing the car; 2. Regularly clean the dirt inside the exhaust pipe.
Was this review help?
6
2
Share
MacDaniella
08/12/25 1:38am
I often help people repair cars, and most exhaust pipe noises are caused by loose connections or cracks leading to air leaks. Over time, the exhaust pipe material can corrode due to heat and develop holes, especially at joints or bends. Another common issue is loose mounting brackets, which cause excessive vibration and rattling noises when driving. Additionally, internal rust or foreign objects stuck in the muffler can create a whooshing sound. If the exhaust pipe leaks, engine exhaust gases escape, not only creating annoying noise but also potentially affecting power output and fuel consumption. To diagnose, first listen for the source of the noise: open the hood while idling and lightly press the accelerator while someone helps locate the sound. Simple fixes include tightening bolts or replacing gaskets, but it's best to visit a professional shop to check for leaks that could harm the car. For regular maintenance, remember to rinse the undercarriage to reduce corrosion risks, especially when driving in rainy areas.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

What is the A2 parallel parking mnemonic?

A2 parallel parking mnemonic is: 1) Press clutch, 2) Engage reverse gear, 3) Turn on signal, 4) Honk horn. Release handbrake. When pole 1 aligns with the center vertical line of the rear window, turn steering wheel fully right. When pole 4 coincides with the center of the triangular window in the rear, turn steering wheel fully left. Straighten the vehicle. Engage forward gear, turn on signal light, turn steering wheel fully left. When the side mirror passes pole 1, turn steering wheel fully right, then execute and straighten. Engage R gear, slowly release clutch: Vehicle speed must be slow. When the small rear window or pole 1 (left front pole of garage) reaches the rear wheel, press clutch firmly (do not brake or pause too long). After stabilizing, turn steering wheel right 1.5 turns, slowly release clutch to reverse while watching interior rearview mirror. When pole 4 (right rear pole of garage) aligns with vehicle center, press clutch firmly (remember not to brake). Precautions: Adjust side mirrors - left mirror should be lowered to see left rear wheel; right mirror should show vehicle body. Adjust interior rearview mirror to see center of rear windshield when looking up.
2
1
Share

Can I Schedule the Subject Four Test Immediately After Passing Subject Three?

You may not necessarily be able to schedule the Subject Four test immediately after passing Subject Three. Generally, you can schedule the Subject Four test about ten days after completing Subject Three. The specific timing depends on the test arrangement. In some regions, you can take the test without any waiting period. How to schedule the test: After logging in, select 'Local Test Scheduling' under the driver's license services, then click to enter the local test scheduling system. Choose the test date and location, click 'Next', select the session, click 'Next', verify your personal information, click 'Get Verification Code'. The system will send a verification code to your phone. Enter the verification code and click 'Submit Application'. Then wait for the DMV's notification. Successful scheduling scenarios: The first scenario refers to completing the scheduling operation on the website and successfully entering the scheduling queue, waiting for approval. The second scenario refers to actually securing a test slot and receiving a confirmation SMS from the DMV. In this case, you can only cancel by bringing your ID to the DMV, and it must be done at least one day before the test. Otherwise, it will be considered a no-show. Each person has three chances to cancel scheduling for each subject. Once these are used up, you must take the test regardless of the reason.
8
4
Share

Does a Crankshaft Oil Seal Leak Need Repair?

Crankshaft oil seal leaks should be taken seriously and addressed promptly. Causes of crankshaft oil seal leaks: It may be found that the crankshaft oil seal is misaligned within the sealing seat, causing the oil seal to tilt relative to the crankshaft outer circumference; during installation, if the chamfer angle of the bore is too large, it can cause biting or scratching damage to the crankshaft oil seal, leading to deformation of the oil seal outer diameter and its metal frame. These issues can result in early-stage oil seepage or leakage after the oil seal is installed. Introduction to oil seals: Oil seal is a common term for general sealing components, simply put, it refers to the sealing of lubricating oil. It is a mechanical element used to contain grease (oil being the most common liquid in transmission systems, also broadly referring to general liquid substances), isolating components that require lubrication from output components to prevent oil leakage. Sealing components used for static sealing and dynamic sealing (typically reciprocating motion) are called oil seals. The representative form is the TC oil seal, which is a double-lipped rubber-encased seal with a self-tightening spring. The term 'oil seal' commonly refers to this TC skeleton oil seal.
3
2
Share

Can a Three-Wheeled Motorcycle License Drive a Two-Wheeled Motorcycle?

A three-wheeled motorcycle license can be used to drive a two-wheeled motorcycle. The three-wheeled motorcycle license is a Class D license, and the Class D license includes the vehicle types covered by Class E and Class F licenses. A two-wheeled motorcycle falls under the Class E license, so a Class D license holder can drive ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles. Steps and Required Documents for Application: You must have held the three-wheeled motorcycle license for at least one year and should not have accumulated 12 penalty points in the current scoring cycle or the most recent scoring cycle before the application. You need to apply for the Class C license upgrade at the vehicle management office where the three-wheeled motorcycle license was issued; other locations cannot process this application. Requirements for Applying for a Motorcycle License Test: Applicants for ordinary three-wheeled motorcycles and ordinary two-wheeled motorcycles should be between 18 and 60 years old, while applicants for light motorcycles should be between 18 and 70 years old. First-time applicants for a motor vehicle driver's license need to bring their ID card and a copy, a medical examination certificate issued by a county-level or higher medical institution or a military hospital at the regiment level or above (the examination mainly checks for color blindness, disabilities, poor eyesight, etc.), and several one-inch bareheaded photos with a white background.
4
1
Share

Which company produces Nailike tires?

Nailike tires are produced by Xuzhou Fengxian Nailike Tire Co., Ltd. Here is some extended information: Brand Introduction: Nailike brand tires are of excellent quality, with a century-long history of tire manufacturing. It is also a global tire manufacturer and leader, serving as the dedicated tire for many supercars on the racetrack, earning the title of 'King of Racing Tires.' They use soft rubber, making them softer, more comfortable, and quieter. Main Advantages: The tire products are widely used in various car brands worldwide, accounting for 1/4 of global sales. The performance is well-balanced in all aspects, and it is the most wear-resistant among high-end brands. In the domestic market, many domestic car manufacturers such as Honda, Toyota, and Nissan use these tires, and sales are very high.
1
0
Share

Can the original license plate be retained when transferring ownership of a sedan?

The original license plate can be retained by the original owner for 6 months after the vehicle ownership transfer. When applying for new vehicle registration after completing the transfer or cancellation of the motor vehicle registration, the original owner can apply to the vehicle management office to use the original license plate number. The application to use the original license plate number must meet the following conditions: 1. The application must be submitted within six months after completing the transfer or cancellation registration; 2. The original owner must have owned the vehicle for more than three years; 3. All traffic violations and accident records related to the original vehicle must be resolved.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.