···
Log in / Register

What Causes Abnormal Noise in the Car Air Conditioner Blower?

3 Answers
Perez
08/30/25 8:41am
Abnormal noise in the blower is caused by insufficient lubrication or rusting of the bearings. If the blower exhibits abnormal noise, it is recommended to apply some grease to the blower bearings. Continuing to use the blower when it is making abnormal noise may likely damage the blower bearings. Below is some relevant information about the blower: 1. The blower is an important component of the car air conditioning system. Without the blower, no air would be blown out from the air conditioning vents. The blower is located inside the glove compartment on the passenger side of the car. 2. The car air conditioner is a very important comfort feature in a car, capable of both cooling and heating. The working principle of the car air conditioner is quite simple.
Was this review help?
11
4
Share
DonovanFitz
09/12/25 5:33am
Once when I started the car's air conditioning, the blower suddenly made a squeaking noise, which was particularly annoying. It turned out that a lot of dust and small leaves were stuck on the fan blades, causing friction and noise when rotating. This situation is quite common, especially when the car is parked under trees where debris can easily enter. Another possible reason is that the blades are deformed or rusted, leading to unbalanced rotation and producing a rattling sound. If the bearings of the fan motor are worn out, it can also cause a humming noise, and prolonged neglect may even lead to motor burnout. During the rainy season, increased humidity can exacerbate dust friction, making the noise more likely to occur. I usually clean the air conditioning filter regularly to prevent the accumulation of foreign objects. If using a vacuum cleaner to clean the inlet doesn’t help, it’s best to quickly visit a repair shop to disassemble and inspect the blades and motor. Don’t wait until the noise becomes louder to address the issue, as it could affect the efficiency of the air conditioning system.
Was this review help?
13
0
Share
Expand All
DiAdriana
10/26/25 6:22am
Experience shows that blower noises are mostly caused by minor issues, such as debris like insects or twigs stuck in the fan blades, creating a clicking sound when rotating. Deformed or loose blades rubbing against the housing can also cause noise, often more noticeable at high speeds. Aging fan motors, especially with damaged bearings, may produce continuous humming or screeching sounds. Another angle is an unstable blower housing installation causing resonance noises on bumpy roads, while unstable circuit voltage can amplify the noise. I've encountered increased noise during rainy days due to heavier wet dust. It's recommended to first check if the filter is dirty and replace it promptly to prevent dust buildup. Sometimes, simply cleaning the blade area with compressed air to remove debris can solve the problem. Persistent noises require professional inspection to determine if the motor needs replacement.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

What is the solution for having your driver's license deducted 12 points twice within a year?

After your driver's license has been deducted 12 points, the handling method is as follows: 1. Deduction: If your driver's license is deducted 12 points within a year or at one time, the driver involved must go to the traffic police team to accept the handling within 15 days. If you do not go to accept the handling after 15 days, the traffic police team will announce it online and revoke your driver's license directly. 2. Within 15 days: The driver involved needs to take the study voucher issued by the traffic police team to the local vehicle management office to go through the study procedures. After paying the fee, you need to study continuously for 7 days, and then take the theoretical exam for Subject 1 at the driving school designated by the vehicle management office. 3. Exam: After passing the exam, you can take this pass notice to the traffic police team to retrieve your driver's license. The points deducted from the driver's license will be cleared, and you can continue to drive on the road. If you are deducted 12 points twice within a year, that is, more than 24 points, the second time you will need to take Subject 1 and Subject 3 exams after completing the study, and you can retrieve your driver's license only after passing the exams.
16
4
Share

What are the symptoms of a leaking cylinder wire?

Cylinder wire leakage can cause symptoms such as engine shaking, unstable idle, and weak acceleration in the engine. There are many reasons that can lead to weak acceleration, shaking, and unstable idle in the engine, and cylinder wire leakage is just one of them. Excessive carbon buildup in areas such as the throttle body, idle motor, intake valve, intake pipe, combustion chamber, spark plugs, and fuel injectors can also cause such faults. The cylinder wire and its quantity are as follows: 1. Cylinder wire, also known as high-voltage wire: As the name suggests, the high-voltage wire is responsible for transmitting the high-voltage current generated by the high-voltage coil to the spark plug. A set of high-quality high-voltage wires must have minimal current loss and avoid electromagnetic interference generated during the high-voltage transmission process. 2. The number of cylinder wires is the same as the number of engine cylinders: With technological advancements, many cars now no longer have cylinder wires. The cylinder wire and ignition coil are integrated into one, with one ignition coil per cylinder, greatly reducing the size and providing more convenient conditions for independent ignition per cylinder.
20
3
Share

Can a Repaired Tire Be Used on Highways?

A repaired tire can be used on highways, as it performs similarly to its original state and meets the driving conditions for highways. The maintenance methods for tires include: 1. Regularly checking tire pressure; 2. Periodically inspecting tires for bulges, cracks, cuts, punctures, or abnormal wear; 3. Removing foreign objects such as stones, metal pieces, or nails from the tire treads; 4. Performing wheel alignment or tire balancing. The hazards of unstable tire pressure include: 1. Reduced friction and adhesion of the tire, affecting braking performance; 2. Causing steering wheel vibration or deviation, reducing driving comfort; 3. Accelerating localized wear of the tread pattern in the center of the tire.
4
1
Share

How to Use the Seat Memory Function in Mazda Atenza?

To use the seat memory function in Mazda Atenza, follow these steps: 1. Power on the vehicle and adjust the seat to your preferred comfortable position; 2. Press the 'M' button to activate the seat memory function, then press any of the number keys (1, 2, or 3) to memorize the seat position; 3. A beep sound and relevant display on the instrument panel indicate successful memorization; 4. To recall the setting, long-press the assigned number key, and the seat will automatically adjust to the memorized position. Taking the 2020 Mazda Atenza as an example, it is a mid-size sedan with body dimensions of 4870mm in length, 1840mm in width, and 1445mm in height, a wheelbase of 2830mm, a fuel tank capacity of 56.2 liters, and a curb weight of 1518kg.
1
3
Share

Does pressing the accelerator deeper make the car go faster?

Pressing the accelerator deeper does make the car go faster. Relevant information is as follows: 1. Introduction: The deeper the accelerator is pressed, the higher the engine speed (how many revolutions the engine makes per minute) becomes. However, engine speed is related to multiple factors. Automotive design engineers specify the rated speed (i.e., normal operating speed) and maximum speed (the fastest speed the engine can achieve at full capacity) during the design phase. 2. Notes: At the same engine speed and gear, if the car is empty (with a lower total weight), the speed will be higher; if the car is fully loaded (with a higher total weight), the speed will be lower. At the same engine speed, higher gears (e.g., 4th gear) result in higher speeds, while lower gears (e.g., 1st gear) result in lower speeds. Therefore, under normal circumstances, pressing the accelerator to the floor will maximize the engine speed (without exceeding the designed maximum speed), and the car speed will also increase, potentially reaching the maximum speed. However, whether the maximum speed is achieved depends on factors such as the gear, vehicle load (total weight of the car), and road conditions (uphill, flat, or downhill).
6
5
Share

What transmission does the Mazda 8 use?

Mazda 8 uses different transmissions depending on the situation: 1. The 2.3L naturally aspirated engine is paired with a 4AT transmission; 2. The 2.5L naturally aspirated engine is paired with a 5AT transmission. Taking the 2015 Mazda 8 as an example, it belongs to the MPV category, with body dimensions of: length 4860mm, width 1852mm, height 1685mm, a wheelbase of 2950mm, a fuel tank capacity of 69L, and a curb weight of 1766kg. The 2015 Mazda 8 features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum horsepower of 163PS, a maximum power of 120kW, and a maximum torque of 226Nm, paired with a 5-speed automatic transmission.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.