What Causes Abnormal Noise in Car Steering?

What Causes the Clunking Noise in the Chassis When Accelerating or Decelerating?

When accelerating or decelerating, the clunking noise in the chassis can be caused by the following reasons: Suspension System: The noise heard when starting the vehicle is usually due to a fault in the suspension system, which may be caused by loose or damaged engine mounts. Steering and Suspension Systems: The noise heard when turning the vehicle may be due to faults in the steering and suspension systems, as the vehicle tilts during turning, causing the suspension system to deform and participate in the movement. Braking System Components: The noise heard when driving on good road conditions may be due to faults in the braking system components, such as loose or worn parts, out-of-round brake drums, or uneven brake discs. Bearing System: It could also be an issue with the bearings that connect moving and stationary parts of the vehicle. If it's a bearing problem, the driver can identify it by applying slight brakes. If the noise remains unchanged when braking at a constant speed, then the issue is with the bearings.

1

2

Share

What Are the Reasons Why a Car Key Cannot Open the Door?

Reasons why a car key cannot open the door are as follows: 1. The remote key may not open the door due to a dead battery: Remote keys use button batteries, which may not be available at convenience stores. If there are auto parts stores or 4S shops nearby, they will definitely sell them. Owners can usually buy more online for emergency use. 2. The remote key is being interfered with by signals: Signal interference with the key is relatively rare. If the key battery is confirmed to have power, signal interference can be considered. 3. Fault in the connection device between the door handle and the door lock itself: This type of fault causing the door to not open is a malfunction, and the possibility of the owner fixing it themselves is very small. The door connection mechanism may have come loose due to driving vibrations, preventing the door lock from sensing the action of pulling the door handle. 4. The door is frozen and cannot be opened in winter: If the door lock, door handle, or door frame is frozen in winter, the key will definitely not open the door. Note: If the door is frozen, do not pull it forcefully, as this can easily damage the door.

2

0

Share

Why should you not attempt a second ignition if water enters the engine?

To prevent water from entering the engine and causing serious consequences. Here are the relevant explanations: 1. The engine will inevitably stall after water enters: Since the water entering the cylinders lacks lubricating properties, blindly attempting to restart the engine after stalling may lead to severe damage or complete failure due to cylinder scuffing. 2. Check the condition of all vehicle system fluids: This is to prevent issues such as foaming or cloudiness after water ingress, which can cause oil deterioration and loss of lubrication. Additionally, water may carry sand particles that could lead to excessive engine wear. In such cases, immediate cleaning and replacement are necessary. After inspection, it's essential to clean the electrical connection components inside the engine compartment to prevent corrosion and sand residue caused by accumulated moisture in these areas.

6

0

Share

Why Does Antifreeze Change Color?

Antifreeze changes color due to deterioration, which not only reduces its antifreeze effectiveness but also diminishes its cooling performance for the engine. When the engine operates at high temperatures without adequate cooling, the viscosity of the engine oil decreases, leading to prolonged wear on engine components and, in severe cases, potential engine failure. Antifreeze is designed to prevent the coolant from freezing in cold winter conditions, which could otherwise crack the radiator or damage the engine block. It is primarily used in liquid-cooled engine cooling systems, offering protection against freezing in winter, boiling in summer, scale formation, and corrosion.

15

2

Share

Where is Dongfeng Citroën manufactured?

Citroën originates from France. In May 1919, Citroën's Type A began production in Quai de Javel, France, marking the commencement of Citroën's automobile manufacturing. The Type A pioneered several firsts for France: it was the first mass-produced, low-cost, fully-equipped production line introduced in Europe, and the first left-hand drive vehicle. The Type A's performance was remarkably advanced for its time: its powertrain featured a 1327cc four-cylinder engine with a fuel consumption of only 7.5 liters per 100 kilometers. Equipped with a three-speed transmission, it could reach a top speed of 65 km/h. Its three-box, four-seater structure was highly popular. By the end of that year, Citroën introduced a commercial vehicle based on the Type A: a small trailer truck with a 300kg payload. From May 1919 to January 1921, total production of the Citroën Type A reached 24,000 units. Dongfeng Citroën is a major joint venture brand in China between Dongfeng Motor Corporation, one of China's largest automotive companies, and France's PSA Group. Established in 1969, Dongfeng Motor Corporation is a cornerstone of China's automotive industry. Over the years, it has developed major production bases in Shiyan (focusing on medium and heavy commercial vehicles, components, and automotive equipment), Xiangyang (light commercial vehicles and passenger vehicles), Wuhan (passenger vehicles), and Guangzhou (passenger vehicles).

20

4

Share

How to Tell if a Car's Oxygen Sensor is Faulty?

To determine whether a car's oxygen sensor is faulty, observe the color of the sensor's tip: a white tip indicates that the oxygen sensor has been contaminated by silicon to a certain extent and needs immediate replacement; a brown tip suggests lead contamination, which also requires replacement; a black tip is mainly caused by carbon deposits, in which case cleaning it thoroughly is sufficient. The ceramic part of the oxygen sensor is hard and brittle, so striking it with a hard object or washing it with strong airflow may cause it to break, preventing the oxygen sensor from maintaining normal working conditions.

1

2

Share

What Causes Abnormal Noise in Car Steering?

What Causes the Clunking Noise in the Chassis When Accelerating or Decelerating?

What Are the Reasons Why a Car Key Cannot Open the Door?

Why should you not attempt a second ignition if water enters the engine?

Why Does Antifreeze Change Color?

Where is Dongfeng Citroën manufactured?

How to Tell if a Car's Oxygen Sensor is Faulty?

How to Deal with Grooves on the Surface of Brake Discs?

What Causes the Noise Under the Steering Wheel When Driving on Rough Roads?

What to Do When the Anti-Theft System Locks and the Engine Won't Start?

What are the penalties for making phone calls while driving?