What Causes Abnormal Noise from the Front Wheels of a Car?

2 Answers
Amy
08/28/25 2:04am
The causes of abnormal noise from the front wheels of a car are: 1. A rhythmic sharp noise, which may be caused by friction between the brake pads and the brake disc due to insufficient clearance; 2. A continuous sharp noise may indicate a damaged bearing; 3. A continuous dull noise could suggest an issue with the drive shaft; 4. A nail stuck in the tire causing friction with the ground; 5. Leaking hydraulic oil in the shock absorber, resulting in loss of damping effect; 6. Loose lower arm ball joints; 7. Loose chassis rubber bushings or bolts. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are typically installed on metal rims to support the vehicle body, absorb external shocks, ensure contact with the road surface, and maintain driving performance.
Was this review help?
4
2
Share
Pedro
09/09/25 7:32am
I've encountered the issue of abnormal noises from the front wheels of a car several times before and have summarized several possible causes. The most common one is bearing problems, producing a humming sound that becomes very noticeable while driving, especially during turns or acceleration. Loose ball joints can also cause creaking noises, particularly when going over bumps or steering. As for the brake disc area, if the brake pads are too worn or the caliper is misaligned, there will be sharp friction sounds while driving. Regarding tires, uneven tire pressure or bulges can also cause a thudding sound when starting. If the suspension system components like shock absorbers are damaged or the links are loose, you'll feel shaking and noise at high speeds. Problems with the steering tie rod usually come with steering wheel vibrations accompanying the noise. I think these are all serious issues, and getting to a repair shop early can prevent more severe damage. Remember, safety is priceless—don't delay. Regular maintenance checks on front wheel components are good habits to prevent problems before they occur.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

How many kilometers should the brake pads of a Corolla be replaced?

Corolla brake pads should be replaced every 40,000 to 60,000 kilometers. Automotive brake pads, also known as automotive brake linings, refer to the friction materials fixed on the brake drums or brake discs that rotate with the wheels. The friction linings and friction blocks within them bear external pressure, generating friction to achieve the purpose of vehicle deceleration. The Corolla has a body length, width, and height of 4630mm, 1775mm, and 1480mm respectively, with a wheelbase of 2700mm. The Corolla is equipped with Michelin 215/45R17 tires, TRD Sportivo high-performance shock absorbers, TRD TF4 17-inch sport rims, reinforced clutches, and high-performance brake pads, ensuring it has relatively ideal sports performance.
19
2
Share

Are Oil Filters Universal?

Oil filters are not universal, but oil filter elements are generally interchangeable within the same vehicle series. The oil filter element, also known as the oil filter, functions to remove impurities, gums, and moisture from the oil, delivering clean oil to various lubrication points. Due to the high viscosity of oil and the significant presence of impurities, oil filters typically consist of three stages to enhance filtration efficiency: the oil strainer, the oil coarse filter, and the oil fine filter. The oil strainer is installed in the oil pan before the oil pump and usually employs a metal mesh design. The oil coarse filter is positioned after the oil pump and is connected in series with the main oil passage. It mainly includes metal scraper types, sawdust filter element types, and microporous filter paper types.
12
5
Share

Can the ETC license plate number change be processed online?

Currently, the ETC license plate number change cannot be processed online. To change the license plate number for ETC, the vehicle owner should first go to the bank to unbind the original ETC-linked bank card, and then apply for a new binding for the new vehicle. ETC Installation Process: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; the red light will briefly turn on, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device. ETC Activation Method: Insert and remove the ETC card twice in succession until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears when inserting and removing twice without the electronic tag attached, this is normal and does not affect activation. Alternatively, press the button on the top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth and open the corresponding mobile app (usually, a download QR code is provided on the electronic tag). Enter the device activation interface. Click "Connect Device" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle's front to complete activation.
12
0
Share

How to Turn Off the Automatic Headlights on the 2019 Corolla?

The automatic headlights on the 2019 Corolla turn off automatically and do not require manual operation. The vehicle determines when to turn the lights on or off based on the surrounding environment. The front headlights are equipped with a light-sensing control system, which automatically activates the headlights when the ambient light dims and turns them off when the light brightens. The automatic headlights are particularly useful when driving through tunnels, as they activate the lighting system via the light sensor. In terms of dimensions, the 2019 Corolla measures 4635mm in length, 1780mm in width, 1455mm in height, and has a wheelbase of 2700mm. Power comes from a 2.0L engine, delivering a maximum power of 168 horsepower and a peak torque of 210 Nm, paired with either a CVT or 6AT transmission.
10
0
Share

Where is the OBD connector of BAIC Huansu S3?

The OBD interface of BAIC Huansu S3 is located under the glove box on the passenger side. Adjust the passenger seat and put your head in to see it. The OBD interface of the car is very useful. This interface can be connected to a diagnostic computer. After connecting to the diagnostic computer, the technician can read the fault codes of the car. There are many electronic devices in the car. When some electronic devices fail, the car's computer can generate fault codes, which can help technicians quickly determine the cause and location of the fault. BAIC Huansu S3 is positioned as a 7-seater small SUV, with a body length, width and height of 4320 mm, 1730 mm and 1730 mm respectively.
5
4
Share

Where is the Jetta Air Conditioning Relay Located?

Jetta air conditioning relay is located in the vehicle's wiring control box, which is positioned below the steering wheel. You can access it by removing the decorative cover. The air conditioning relay is an automatic switching component with isolation functionality, designed to control high-current operations using low current. It serves roles such as automatic regulation, safety protection, and circuit switching in electrical systems. Jetta models include the Jetta VS5, Jetta CL, Jetta CEL, Jetta CLX, and Jetta CTX, among others. The Jetta VS5 measures 4419mm in length, 1841mm in width, and 1616mm in height, with a wheelbase of 2630mm. Positioned as a compact car, the Jetta VS5 utilizes a front-engine, front-wheel-drive layout.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.