What causes abnormal noise at low speeds that disappears after acceleration?

2 Answers
ElijahRose
07/29/25 8:43am
Reasons for abnormal noise at low speeds that disappears after acceleration: deformed exhaust pipe; engine abnormality. The following details the causes: Deformed exhaust pipe: In most front-engine vehicle models, the exhaust pipe runs from the bottom of the car to the rear. Driving on rough roads or hitting the undercarriage can easily cause the exhaust pipe to dent or deform. A deformed exhaust pipe increases exhaust resistance, leading to abnormal noises. Engine abnormality: This is mainly caused by excessive wear of certain parts or improper assembly and adjustment. Some abnormal noises can serve as warnings, while engine noises may indicate potential serious damage. Therefore, when engine noises occur, they should be promptly repaired to prevent further damage.
Was this review help?
11
5
Share
MacKimberly
08/11/25 6:18pm
As an ordinary person who drives frequently, it's quite common to encounter strange noises at low speeds that disappear when accelerating. I remember that time I went on an outing, my car always made a squeaking sound below 30km/h, but it became quiet once I accelerated past 40. Later, a check-up revealed it was a tire balance issue. The mechanic said that uneven wear on the tire tread at low speeds caused the friction noise, and the vibration stabilized after speeding up, so the noise disappeared. It could also be due to loose suspension ball joints or worn brake pads, which cause strange noises from greater shaking at low speeds. If not addressed in time, it might seriously affect steering wheel stability, so it's recommended to take some time to visit a repair shop for a four-wheel alignment and suspension check. Usually, pay more attention to the condition of the tires before driving to avoid long-distance bumps exacerbating the problem.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

How to Apply for Traffic Violation Elimination?

Methods for applying for traffic violation elimination: 1. Download and install the Traffic Management 12123 app, and register with your mobile phone number; 2. Click the motor vehicle button in the upper left corner of the main interface; 3. Click the process button under pending violations; 4. Click the traffic violation elimination application; 6. Fill in the reason for the application and photo evidence, then submit and wait for review. Traffic violations refer to the behavior of vehicle drivers, pedestrians, passengers, and units and individuals related to road traffic activities that violate the Road Traffic Safety Law and related laws, regulations, and traffic management rules. The hazards include: 1. Leading to traffic disorder; 2. Causing accidents; 3. Affecting the city's appearance and creating public hazards.
5
1
Share

Which model of the 2020 RAV4 experienced engine oil emulsification?

2020 RAV4 model that experienced engine oil emulsification is the Toyota RAV4, which is the basic model in Toyota's compact multi-purpose off-road vehicle family. The vehicle dimensions are 4630mm in length, 1855mm in width, and 1685mm in height, with a wheelbase of 2660mm. Engine oil emulsification occurs when coolant mixes with the engine oil, mainly due to the following reasons: 1. Coolant leakage into the oil from the heat exchanger (cracked water chamber); 2. Water from the combustion chamber entering the oil, water from the cylinder head entering the oil (poor sealing or cracked water chamber), or improper sealing of the cylinder water jacket (wet cylinder liner), cylinder liner cavitation.
12
3
Share

What faults may occur with the Edge?

The faults that may occur with the Edge include: 1. Steering system malfunction; 2. Tire pressure monitoring system malfunction; 3. Cooling system malfunction; 4. Anti-lock braking system malfunction; 5. Abnormal noise from brake pads; 6. Electric parking brake malfunction. When any of the above faults occur, the source should be identified and addressed as soon as possible. The Edge is a compact SUV under Changan Ford, with body dimensions of 4585mm in length, 1882mm in width, and 1688mm in height, and a wheelbase of 2710mm. The Edge is equipped with a 2.0T four-cylinder engine and features such as a 12.3-inch full LCD instrument panel, multifunction steering wheel, road speed limit recognition, lane keeping assist, automatic parking, adaptive cruise control, pre-collision braking system, and panoramic imaging.
11
4
Share

What happens if a traffic violation is not handled for more than 30 days?

There are two types of penalties for traffic violations not handled for more than 30 days: Administrative penalties: 1. If the fine is not paid by the due date, an additional 3% of the fine amount will be added per day; 2. The court may be petitioned for compulsory enforcement. Suspension or revocation of motor vehicle driving license penalties: 1. Road traffic violations should be handled at the traffic management department of the public security authority within 15 days; 2. If the violation is not handled without justifiable reasons within the time limit, the motor vehicle driving license will be revoked. Traffic violations usually refer to violations of road traffic safety laws and regulations, traffic management, and behaviors that affect road conditions by motor vehicle drivers, non-motor vehicle drivers, or pedestrians. It can also refer to handling matters in violation of conventional rules and regulations.
9
0
Share

What are the new regulations on the restricted hours for bus lanes in Jinan?

Jinan bus lane restricted hours new regulations: On regular bus lanes, from 7:00 to 9:00 and 17:00 to 19:00 on weekdays, only buses, school buses, and medium-sized or larger passenger vehicles are permitted to pass; during other time periods, social vehicles may use the lane. On BRT dedicated lanes, only buses, school buses, and medium-sized or larger passenger vehicles are allowed to pass. Bus lanes are a type of dedicated right-of-way, specifically designated for bus traffic, similar to small vehicle lanes, large vehicle lanes, and motorcycle lanes on urban arterial roads. Their primary function is to facilitate the bus network in addressing road congestion issues caused by various peak hours and unexpected situations.
14
3
Share

Is it generally not penalized to cross a single white line on the highway?

Crossing a single white line on the highway is penalized, just like on regular roads, as it constitutes a violation of prohibited marking instructions. If caught by electronic surveillance or traffic police, it will result in a 3-point deduction and a fine. The purpose of white solid lines is to separate lanes in the same direction, typically used at intersections before traffic lights, highway ramps, bridge entrances, tunnels, etc. White solid lines are also present in white guiding lines, and vehicles are strictly prohibited from suddenly changing lanes and crossing them when approaching. Introduction to highway white lines: 1. Rumble strips: Raised white markings on the road that alert drivers to curves, downhill sections, etc.; 2. Optical illusion markings: These create an optical illusion for drivers, making the road appear to narrow or dip, prompting them to slow down before entering tunnels; 3. Deceleration markings: These create a visual narrowing of the lane, inducing a sense of pressure to remind drivers to slow down when navigating curves or slopes; 4. Guiding lines: Used at irregular, overly wide, or complex intersections and other special locations.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.