What Causes Abnormal Noise and Inability to Increase Speed When Accelerating?

1 Answers
StJayla
07/30/25 1:02am
Abnormal noise and inability to increase speed when accelerating may be due to low engine torque or transmission slippage and wear. Below is relevant information about the accelerator: 1. Brief Introduction: The accelerator pedal, also known as the throttle pedal, is part of the vehicle's fuel supply system. By controlling the pedal's depression, it regulates the engine throttle opening, air intake, and computer-controlled fuel injection, thereby managing the engine's speed. 2. Handling Procedure: If encountering accelerator pedal issues during the break-in period of a new vehicle, remain calm. Follow professional advice (indeed, this is the only reasonable approach)—fully depress the brake pedal to bring the vehicle to a complete stop, turn off the engine, and then contact for assistance.
Was this review help?
8
0
Share
More Forum Discussions

What are the causes of high water temperature?

The causes of high water temperature are: 1. The surface of the radiator is too dirty; 2. Insufficient coolant or not replaced for a long time; 3. Damaged thermostat; 4. Blocked water passages in the engine; 5. Faulty cooling fan; 6. Faulty water circulation pump. The hazards of excessively high water temperature are: 1. Accelerated wear; 2. Piston ring scuffing; 3. Radiator bursting; 4. Deformation and damage to the cylinder head and cylinder block. Methods to handle high water temperature: 1. Stop the vehicle immediately and let it cool down naturally; 2. Add a small amount of distilled water; 3. Check if the cooling fan and thermostat are damaged, and replace them promptly if necessary.
12
0
Share

What level of car is the Qashqai?

The Qashqai is a compact SUV (C-segment). Its dimensions are: length 4401mm, width 1837mm, height 1593mm, with a wheelbase of 2646mm, minimum ground clearance of 181mm, fuel tank capacity of 57 liters, luggage capacity of 486 liters, and curb weight of 1444kg. The Qashqai features MacPherson strut front suspension and multi-link rear suspension. It is powered by a 2.0L inline 4-cylinder naturally aspirated engine producing 151 horsepower (151ps), with maximum power of 111kW and peak torque of 194Nm. The transmission is a 7-speed continuously variable transmission (CVT).
3
2
Share

What does the ECO indicator on the car dashboard mean?

When the ECO indicator appears on the car dashboard, it means the vehicle's fuel-saving mode is activated. Some cars without a dedicated eco mode may still display ECO, indicating the driver's current driving style is fuel-efficient. Most vehicles typically offer three driving modes: Eco mode (fuel-saving), Comfort mode, and Sport mode. Cars equipped with an Eco mode can activate it to optimize fuel efficiency by adjusting the vehicle's operating parameters. When Eco mode is engaged, the throttle response becomes less sensitive. For daily driving, Comfort mode is generally sufficient, and Eco mode isn't usually necessary. Most automatic transmission vehicles feature an S (Sport) mode. Engaging Sport mode enhances throttle sensitivity and delays gear shifts, allowing the engine to reach higher RPMs (near the redline) before upshifting. In Sport mode, the engine maintains higher idle speeds between 2,000-3,000 RPM even without throttle input.
17
2
Share

What is the minimum ground clearance of the tenth-generation Accord?

The minimum ground clearance of the tenth-generation Accord is 120mm. Its body dimensions are: length 4893mm, width 1862mm, height 1449mm, with a wheelbase of 2830mm. The fuel tank capacity is 56 liters, and the trunk capacity is 574 liters. The curb weight is 1495kg. The front suspension of the tenth-generation Accord is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 1.5L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 194PS, a maximum power of 143kW, and a maximum torque of 260Nm. It is paired with a continuously variable transmission (CVT).
6
2
Share

Can Ethylene Glycol Antifreeze Be Mixed?

Ethylene glycol antifreeze cannot be mixed. The antifreeze used in cars includes ethylene glycol antifreeze, propylene glycol antifreeze, diethylene glycol antifreeze, etc. These antifreeze products have different colors because their chemical compositions vary. Mixing them can lead to clogging of the radiator pipes. Therefore, antifreeze of different colors should not be mixed. When using antifreeze in a car, it is essential to stick to the same brand of antifreeze. It is important to note that even antifreeze of the same color should be added with caution. Although they may share the same primary chemical composition, they often contain various functional additives, such as rust inhibitors and anti-scale agents, which require careful consideration during addition. If the car is low on antifreeze, do not mix it blindly. Always use the same brand and model of antifreeze to top it up. If the original antifreeze model is uncertain, it is recommended to flush the system before adding new antifreeze.
16
3
Share

What is the engine model of the Kia Stonic?

The engine model of the Kia Stonic is G4LC. The vehicle is equipped with a 1.4-liter naturally aspirated engine across all variants, delivering a maximum power of 73.6 kW and a maximum torque of 132.4 Nm. The engine reaches its peak power at 6,300 rpm and its peak torque at 4,000 rpm. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. The Kia Stonic is a compact SUV under the Kia brand, with dimensions of 4,100 mm in length, 1,735 mm in width, and 1,503 mm in height, and a wheelbase of 2,570 mm. In terms of exterior design, the vehicle adopts Kia's signature tiger-nose front grille, embellished with chrome elements, paired with a large trapezoidal air intake below. The side profile of the vehicle features a two-tone body design.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.