What causes a Volkswagen Magotan to fail to start?

1 Answers
EverlyAnn
07/30/25 2:38am
Failure to start a Volkswagen Magotan can be caused by issues in the engine's fuel system, electrical system, or mechanical faults. Timely resolution is necessary depending on the specific situation. Taking the Magotan 2020 330TSI DSG Leading model as an example: This vehicle is classified as a mid-size car, equipped with a 7-speed dual-clutch transmission, and features a 4-door, 5-seat sedan body type with a top speed of 210 km/h. The car adopts a front-engine, front-wheel-drive layout, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. It comes with electric power steering, an electronic parking brake, and a unibody structure.
Was this review help?
14
1
Share
More Forum Discussions

What are the tire specifications for the Odyssey?

The Odyssey comes with two tire size specifications: 225/50R18 and 215/60R17. In 225/50R18, the first number 225 indicates the tire width is 225MM, 50 represents the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, 18 denotes the rim diameter is 18 inches, and the letter "R" in the middle stands for radial tire. In 215/60R17, the first number 215 indicates the tire width is 215MM, 60 represents the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, 17 denotes the rim diameter is 17 inches, and the letter "R" in the middle stands for radial tire. The Odyssey tires are from brands Bridgestone and Yokohama, featuring a five-spoke wheel design, with the spare tire being non-full size. If you want to replace the tires yourself, follow these steps: Take out the spare tire and jack, place the jack under the vehicle frame near the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, making sure the jack is positioned under the vehicle and at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise, but do not fully unscrew them—just enough to reduce resistance. Keeping the tire on the ground when first loosening the nuts ensures that the nuts turn, not the tire; Turn the nuts counterclockwise until they are loose, repeat this for all lug nuts, then remove them completely; Place the new tire on the hub, carefully aligning the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are snug. The tire replacement is now complete. Besides the model, tires also display the following common data: Tire cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim size compatible with the tire, for practical use, such as "Standard Rim 5.00F".
12
0
Share

What kind of engine oil should be used for Golf 1.6?

Volkswagen Golf 1.6 is recommended to use original semi-synthetic engine oil with a specification of 5W-40. This type of engine oil is beneficial for the car's engine. The importance of engine oil: Currently, many engines use engine oil because it allows the engine to operate better and also helps extend the engine's service life. The engine is like the heart of a car. Whenever there is a problem with the engine, it can be very frustrating for the owner as it usually affects normal driving. Engine oil requirements for Golf 1.6: For naturally aspirated engines like the Golf 1.6, the requirements for engine oil are not high. Mineral oil or semi-synthetic oil can be used. If the consumer's budget allows, fully synthetic oil can also be used. Compared to naturally aspirated engines, turbocharged engines have more precise internal components and operate in more complex conditions. They require higher-grade lubricants with better fluidity, preferably fully synthetic oil.
5
1
Share

Where is the Defogger Switch in the Tiida?

The Nissan Tiida's center console features mechanical buttons, and the defogger switch is located on the center control panel. The air conditioning defogger and warm air can be directly activated via these buttons. Method to activate defogging: The defogger buttons include controls for both the front and rear windshields. Simply press the corresponding button to effectively defog the windows. Method to activate warm air: To turn on the warm air, simply increase the temperature setting. Additionally, turning off the car's A/C button can help save energy. The compressor does not need to engage during warm air delivery, as the heat is directly supplied by the coolant system and the glass heating wires. Alternatively, pressing the AUTO button will allow the air conditioning system to automatically maintain a stable interior temperature without the need for manual adjustments.
4
3
Share

Is a tire pressure of 210 normal for the Sylphy?

A tire pressure of 210 is not normal for the Sylphy. The recommended tire pressure for the Nissan Sylphy is between 2.3-2.5 bar. The driving wheels can have slightly higher pressure than the driven wheels, and winter tire pressure can be slightly higher than summer tire pressure, but it is recommended not to exceed 2.8 bar. New car tire pressure is generally around 3.0 bar. Optimal tire pressure for the Sylphy: The optimal tire pressure for the new Nissan Sylphy is between 2.3-2.5 bar. The most standard pressure should be based on the manufacturer's specifications, which are indicated on the tire placard located on the driver's side center pillar, showing the cold tire inflation pressure. Regularly check the tire pressure, including the spare tire. Improper tire pressure can adversely affect tire lifespan and vehicle handling. Tire pressure check conditions: Tire pressure should be checked when the tires are cold. Tires are considered cold when the vehicle has been parked for more than 3 hours or driven less than 1.6 km (1 mile). Do not use tires that are more than 6 years old, regardless of whether they have been used before. Tire performance deteriorates over time and with usage.
12
4
Share

What is the fuel consumption of the Sail?

The 1.3L model of the Sail has a fuel consumption of 5.2-7.2L per 100 kilometers, while the 1.5L model consumes 5.4-7.8L per 100 kilometers. How to calculate car fuel consumption: Fill up the car's fuel tank completely and reset the trip meter to zero. After driving for a period of time, refill the tank and note the amount of fuel added. Divide the amount of fuel added by the distance traveled to get the fuel consumption per kilometer. Reasons for high fuel consumption: The driver's skill level, improper gear shifting and excessive braking during driving can artificially increase engine power loss. Additionally, frequent braking leads to more starts, and starting consumes a high rate of fuel. Driving at low temperatures: cars require the engine to operate at normal temperatures. If the car is driven without preheating after starting, the engine remains at a low temperature, resulting in poor fuel atomization and incomplete combustion.
19
1
Share

What does the anti-theft authentication failure of Haval H6 mean?

Haval H6 anti-theft authentication failure means that the car battery is low on power. Reasons for engine anti-theft authentication failure: First, it could be due to a mismatch between the remote key and the engine computer. There are many specific reasons for this: for example, electromagnetic interference nearby, large power equipment nearby, or being in a very open area, etc. Second, the front windshield film may have gotten wet (a very common reason), and water can flow into the central control unit along the glass. When applying the film, it is essential to remind the technician to be careful, and it is best to place a towel on the dashboard. The function of the engine immobilizer system: For cars equipped with an engine immobilizer system, even if a thief can open the door, they cannot drive the car away. A typical engine immobilizer system works as follows: the car ignition key contains an electronic chip, and each chip has a fixed ID (equivalent to an identification number). The car can only start if the ID of the key chip matches the ID on the engine side. Conversely, if they do not match, the car will immediately cut off the circuit automatically, preventing the engine from starting.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.