What Causes a Trunk to Not Stay Locked?

1 Answers
OBrynlee
07/29/25 1:31pm
The reasons why a trunk cannot stay locked are: 1. The rear hatch automatically rises after pressing the open switch due to the use of overly stiff spring rods; 2. Mismatch between the closing limit rubber block and the locking mechanism; 3. Faulty trunk adjustment wiring; 4. Malfunction of the trunk hydraulic support rods. Methods for maintaining the trunk include: 1. Use a brush to clean dirt during washing, including the edges and troughs of the trunk, followed by odor treatment after cleaning; 2. Use separate cargo bags to organize items systematically; 3. Lay a trunk mat to prevent dirt or liquids from entering and eroding the trunk surface, while also preventing items inside the trunk from sliding, reducing the possibility of contamination or damage.
Was this review help?
6
0
Share
More Forum Discussions

Can You Pull the Handbrake in First Gear?

You cannot pull the handbrake in first gear; you must shift to neutral before pulling the handbrake. Below are some precautions regarding vehicle operation: 1. Pre-departure inspection: Conduct a comprehensive check of your vehicle before setting off each day, including checking for oil or water leaks, measuring tire pressure to ensure it is appropriate, inspecting the engine oil condition to verify its color is normal and the oil level is correct. 2. Safe driving: Always use seat belts correctly. In the event of a severe collision, seat belts provide protection no less effective than airbags. Avoid driving while fatigued; take a break every 2 hours. 3. Follow traffic rules: Especially on highways, do not speed. Speeding not only risks fines from traffic police but, more importantly, is unsafe.
16
1
Share

Which Mercedes-Benz E-Class model started featuring a large screen?

New generation Mercedes-Benz E-Class. Here is the relevant introduction about the Mercedes-Benz E-Class sedan: 1. Introduction: The Mercedes-Benz E-Class sedan is a mid-to-large-sized high-end business sedan, sports car, and station wagon developed by Mercedes-Benz, positioned between the C-Class and S-Class. 2. Features: A relaxed and comfortable atmosphere is standard in the E-Class sedan, thanks to the automatic climate control system, which allows passengers to choose their preferred temperature. 3. Seat Configuration: The standard seat upholstery is fabric (for the Classic and Elegance model series) or a combination of fabric and ARTICO artificial leather (for the Avantgarde model series). Luxury genuine leather upholstery is also available as an option, with Nappa leather upholstery being even more luxurious, durable, and breathable.
1
3
Share

Where are the drainage holes on the Mercedes-Benz E-Class?

Normally, the drainage holes on car doors are usually located on both sides at the bottom of the door. Here is some relevant information about the Mercedes-Benz E-Class sedan: 1. Introduction: The Mercedes-Benz E-Class sedan is a mid-to-large-sized high-end business sedan, coupe, and station wagon developed by Mercedes-Benz, positioned between the C-Class and S-Class. 2. Features: A relaxed and comfortable atmosphere is standard in the E-Class sedan, thanks to the automatic climate control system, which allows passengers to select their preferred temperature. 3. Seat Configuration: Standard seat upholstery is fabric (for the Classic and Elegance model lines) or a combination of fabric and ARTICO artificial leather (for the Avantgarde model line). Luxury genuine leather upholstery is also available as an option, with Nappa leather upholstery offering a more luxurious, durable, and breathable option.
16
4
Share

What is the net worth of people suitable for driving a Mercedes-Benz G65?

Generally, they are either wealthy or noble. Below is an introduction to the Mercedes-Benz G-Class: 1. Exterior Design: The flat surfaces and simple straight lines give the G-Class its unique style. This is the highest level of architectural design—optimal practicality. The resulting clear, concise visual effect and strong visual impact make the G-Class design impeccable. The functional-oriented design of the G-Class follows the Bauhaus architectural principle of "form follows function." It is this practicality-oriented approach that showcases the classic body lines and balanced proportions of the G-Class, exuding a strong sense of dignified beauty. 2. Interior Design: Upon entering the car, those who have driven a Mercedes-Benz will find it familiar. The interior of this car clearly draws inspiration from the previous generation of Mercedes-Benz sedans (especially resembling the W202 C-Class). The dark-colored cabin adheres to the practical principles of an off-road vehicle. As the core of the interior, the dashboard maintains a neat and generous styling overall, unified with the simple and resolute exterior—neither overly rugged and exaggerated nor emphasizing curvaceous elegance.
19
3
Share

Can the Trunk Vent Be Blocked?

It is best not to block the trunk vent. Here are the specific functions of the trunk vent: 1. Pressure relief: When forcefully and quickly closing the door or trunk, air is forced into the car. If the interior space is completely sealed, this closing action will increase the air pressure inside, making it difficult to close the door or even preventing it from sealing properly. With a vent, when the interior pressure rises, the vent opens to release the pressure. 2. Air circulation: When driving with the windows closed and the air conditioning on, if the air conditioning is set to external circulation, outside air is continuously drawn into the car. Without this vent, the air pressure inside the car would keep increasing, eventually preventing outside air from entering the car.
15
5
Share

Where are the accelerator and brake pedals located in an automatic transmission car?

In an automatic transmission car, the brake is on the left, and the accelerator is on the right. This is because an automatic transmission car has two pedals in the driver's compartment, whereas a manual transmission car has three. Below is a detailed introduction to the car pedals: The accelerator pedal is a car accessory that allows the driver to control the pedal more freely, enhancing driving safety. Most accelerator pedals are made of aluminum alloy. Adding an accelerator pedal can significantly increase the vertical contact area of the pedal. The brake pedal is the pedal that limits power, also known as the foot brake. It is used to slow down or stop the car and is one of the five major controls in car driving, used very frequently. How the driver controls it directly affects driving safety. How to press the accelerator in a manual transmission car: Pressing the accelerator in a manual transmission car requires a gentle and gradual approach. This means the pedal should be pressed down slowly, allowing the speed to increase gradually and smoothly, reducing the strong sensation of being pushed back. If the accelerator is continuously pressed, the speed will slowly increase even without further pressure, at which point the pedal should be slowly released. Because the accelerator is sensitive, releasing it suddenly can cause the car to jerk. Special tips for novice drivers: When changing lanes or turning, always signal in advance: Lights and horns are the language of driving. Your driving intentions must be communicated to others, especially for novice drivers. Always signal early—the sooner you communicate, the safer it is. When changing lanes or turning, make it a habit to use your turn signals and avoid the bad habit of changing lanes or turning immediately after signaling. Instead, turn on the signal in advance to prevent accidents. Don’t rush when overtaking; follow the procedure: When overtaking, you should first turn on the left turn signal and alternate between high and low beams or honk the horn. On roads without a centerline or with only one lane in the same direction, the vehicle ahead should slow down and move to the right to give way when it receives an overtaking signal from the vehicle behind, provided it is safe to do so. The overtaking vehicle should ensure there is enough safe distance before passing on the left side of the vehicle ahead. After creating sufficient distance, the overtaking vehicle should turn on the right turn signal and return to the original lane. Check surroundings before reversing: When reversing, always check the surroundings first. Do not rely solely on rearview mirrors, parking sensors, or backup cameras. If someone is guiding you, they should stand beside the vehicle, not behind it, to avoid being hit. Slow down and observe at intersections: Intersections have vehicles, pedestrians, and cyclists coming from all directions, making them complex. Therefore, always develop the habit of looking around (while slowing down) when approaching an intersection, regardless of traffic lights or whether your lane has a green light. Observe the situation on the crosswalk and ensure no vehicles are rushing through before accelerating. Check for tailgaters before emergency braking: When braking suddenly, be aware of vehicles behind you. It’s best to maintain a safe distance from the vehicle ahead and avoid emergency braking to prevent rear-end collisions. Maintain a safe distance from the vehicle ahead: Road conditions can be unpredictable. The vehicle ahead might stop suddenly, or a pedestrian might dart out. Therefore, always control your speed and avoid speeding. Additionally, maintain a safe distance from the vehicle ahead to allow enough time to react and prevent accidents. Some vehicles may change lanes without signaling; having enough distance gives you time to respond calmly. Slow down and check surroundings when turning: Always slow down when turning. In some areas, pedestrians and cyclists may use the vehicle lane. When turning, use the rearview mirror to check for pedestrians or cyclists behind or beside you. If you spot any, actively avoid them to prevent collisions. Drive in the middle lane when possible: When driving, it’s best to stay in the middle lane. On roads without a central divider, the middle lane gives you time to react if an oncoming vehicle has an accident, avoiding head-on collisions. On roads with dividers, it provides time to react if someone or a vehicle suddenly emerges from the divider. At night, driving in the middle lane prevents being blinded by oncoming headlights, reducing the risk of missing pedestrians or vehicles in the road. Slow down and honk in poor visibility: In areas or weather conditions with poor visibility, driving can be challenging. Always honk and slow down in advance to ensure safe passage. Slow down when approaching large parked vehicles: If there is a large vehicle parked ahead, be extra cautious. Large vehicles can block your view, and if a vehicle, pedestrian, or cyclist suddenly emerges from beside it, an accident could occur. Therefore, slow down and proceed only when it’s safe.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.