What Causes a Thermostat to Fail?

1 Answers
VanSara
07/29/25 4:21pm
The reasons for thermostat failure are: 1. Prolonged warm-up time causes the engine to operate at low coolant temperature, allowing combustion gases and condensed water on cylinder walls to form acidic substances that corrode the cylinders; 2. Liquid fuel and water wash away the lubricating oil film on cylinder walls and flow into the oil pan, diluting the engine oil in the lubrication system, leading to wear of cylinder liners and piston components; 3. If the cylinder block has defects repaired with adhesive, excessive temperature fluctuations between cold and hot states cause frequent contraction and expansion of the cylinder block, which may cause the adhesive to detach and result in diesel engine malfunctions. The impacts of thermostat failure are: 1. The engine cannot reach optimal operating temperature; 2. Increased engine wear, shortening its service life; 3. Engine oil fails to achieve optimal viscosity, increasing engine operation resistance; 4. Prevents the engine from operating at normal temperature.
Was this review help?
20
4
Share
More Forum Discussions

What does optional license plate prefix mean?

Optional license plate prefix refers to the ability of motor vehicle owners to choose their own license plate numbers. There are two forms of self-composed license plate numbers for cars: one is online selection, and the other is selection at the vehicle management office. Online selection is divided into random selection and self-composed selection. In online selection, only combinations of numbers plus letters plus numbers can be chosen. Owners can opt for random selection or self-composed selection. The number segments available for self-composed selection have been released for more than 7 days. Each self-composed attempt allows up to five numbers to be entered, with a total of 20 attempts. Once a self-composed license plate is selected, it cannot be changed. It is important to note that after selecting a number online, the owner must complete the registration process at the local vehicle management office within three days. If this period is exceeded, the selected number will automatically become invalid. After purchasing a car, the owner must register the vehicle within 15 to 30 days, with a maximum limit of 30 days. If special circumstances prevent the vehicle from being registered within 30 days, the owner must obtain a temporary license plate from the vehicle management office, and temporary license plates can be applied for a maximum of three times.
2
5
Share

Why Won't My Automatic Transmission Car Start?

Reasons why an automatic transmission car won't start: 1. Check the car battery, as it might be dead; 2. There could be an issue with the spark plugs; 3. Verify if the car is out of fuel, and also check if the gear is not properly set. Unlike manual transmission vehicles, automatic cars won't start if the gear is in R (Reverse) or D (Drive) instead of P (Park) or N (Neutral). If the throttle body is dirty, cold starts may fail because carbon deposits block sufficient air intake needed to start the engine. Pressing the accelerator slightly can increase the throttle opening and allow the engine to start. It's also recommended to clean the throttle body. Another possible cause is the absence of antifreeze. Some car owners use water or low-quality antifreeze, which can freeze in extremely cold winter conditions, blocking the entire cooling system and even cracking the engine. This prevents the water pump from functioning, making the car unable to start and potentially damaging other engine components.
16
2
Share

What Insurance Should You Buy When Paying in Full for a Car?

When paying in full for a car, the following types of insurance are necessary: 1. Compulsory Traffic Accident Liability Insurance (CTPL): CTPL is a mandatory insurance in China, and all vehicles must purchase this coverage. In the event of a traffic accident, the insurance company can only compensate the party that was hit, meaning the conditions for compensation are limited. Additionally, without CTPL, the vehicle will lose its eligibility for annual inspection. Therefore, CTPL is essential. 2. Third-Party Liability Insurance: Most car owners opt for both CTPL and third-party liability insurance. Since the compensation amount from CTPL is limited, third-party liability insurance covers the excess amount that CTPL cannot compensate. Even in the event of an accident, you can receive a more reasonable amount of compensation. 3. No-Deductible Insurance: Unlike the first two types of insurance, which are basic and independent, no-deductible insurance is an additional coverage for cars. Its role is that if you incur a claim of 1,000 yuan, the insurance company would normally cover 80% (800 yuan) of the loss. With no-deductible insurance, the remaining 20% you would have to pay is also transferred to the insurance company, meaning you receive 100% compensation. Hence, no-deductible insurance is worth purchasing. 4. Vehicle Damage Insurance: Vehicle damage insurance undoubtedly offers the broadest coverage among necessary insurances. Whether your car suffers from collisions, scratches, water damage, or other harm, you can receive compensation from the insurance company. The final compensation amount depends on various factors such as the cause of the incident and the extent of the damage.
16
2
Share

Where is the rearview mirror heating switch for the Buick Excelle?

The rearview mirror heating switch for the Buick Excelle is located on the vehicle's air conditioning control panel. The icon is rectangular in shape, featuring three curved lines with arrows from the bottom to the top. When the vehicle is powered on or started, simply press the button to activate the rearview mirror heating function, which simultaneously turns on the rear window defroster. The rearview mirror heating function is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rain or fog from the mirror, eliminating the need for frequent manual wiping by the driver and reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is needed, as the driver's side has a control button. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. Heat will dissipate from both left and right rearview mirrors. At the same time, as the temperature rises and evaporation occurs, water droplets on the mirror surface will gradually shrink, and fog will slowly disappear, effectively defrosting and de-fogging the mirror. However, if the rain is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves adding electric heating wires to the mirror. These wires consume a significant amount of electricity. When using the rearview mirror heating function, ensure the vehicle is running. Avoid activating the function while the car is stationary to prevent draining the battery, which could leave insufficient power to start the vehicle. Other methods for defogging rearview mirrors include: Opening windows for air circulation: Crack open both side windows slightly to allow air exchange between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting can also help by blowing warm air to defog the mirrors.
1
2
Share

How to Troubleshoot Incomplete Clutch Disengagement

Clutch disengagement troubleshooting method: Place the vehicle's transmission in neutral position, depress the clutch pedal, and use a screwdriver to pry the clutch mechanism to achieve complete disengagement. The clutch primarily functions through friction and is a composite material with specific structural performance requirements. The friction materials used are mainly for manufacturing brake pads and clutch plates. These materials are critical components in automotive braking and transmission systems, requiring stable friction coefficients and excellent wear resistance. The clutch plate serves as the medium transferring engine power to the gearbox.
14
3
Share

How to Check for Engine Misfire?

Engine misfire can be checked by: 1. Inspecting the electrical circuits within the car's engine for any short circuits or open circuits; 2. If the engine's electrical circuits are functioning properly, then the condition of various components should be examined. An engine is a machine that converts other forms of energy into mechanical energy, originating in the UK. It can refer to both the power generation device and the entire machine including the power unit (such as gasoline engines, aircraft engines). Types of engines include internal combustion engines (e.g., gasoline engines), external combustion engines (e.g., Stirling engines, steam engines), and electric motors.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.