···
Log in / Register

What causes a sudden significant increase in fuel consumption for the Venucia R50?

3 Answers
SanAlina
07/29/25 9:00pm
Venucia R50's sudden significant increase in fuel consumption could be due to dirty fuel lines or poor fuel quality, and a routine maintenance check may be necessary. To reduce fuel consumption, check the air conditioning system in summer: Air conditioning malfunctions are a major cause of high fuel consumption. Poor cooling performance may lead to increased fan speed and lower temperature settings to achieve a comfortable effect. To reduce fuel consumption, avoid running the air conditioning too aggressively in small-displacement vehicles: For vehicles exposed to direct sunlight, avoid turning on the air conditioning immediately after entering. First, open the windows and set the fan to a higher speed without activating the air conditioning to expel the hot air inside. Wait until the vehicle has cooled down moderately before turning on the air conditioning.
Was this review help?
19
4
Share
VanEmilio
08/15/25 6:57pm
I've been driving for many years. If the fuel consumption of the Venucia R50 suddenly increases by 80%, what could be the problem? A severely clogged air filter can restrict oxygen intake, causing the engine to compensate by injecting more fuel and reducing efficiency; old or weak spark plugs may fail to ignite properly, leading to incomplete combustion and wasted fuel; low tire pressure increases rolling resistance, naturally raising fuel consumption. Frequent use of the air conditioner, especially in hot weather, increases the compressor's workload. A faulty oxygen sensor can disrupt the air-fuel mixture, causing the ECU to supply excess fuel. Aggressive driving habits, like sudden acceleration and braking, also waste fuel. I recommend checking and replacing the air filter, measuring tire pressure, and visiting a professional shop for a diagnostic scan if needed. Addressing high fuel consumption early saves fuel and ensures safety.
Was this review help?
19
4
Share
Expand All
DeHolden
10/16/25 7:56am
My Venucia R50 has been consuming significantly more fuel lately, and there must be reasons for it. The air filter is clogged with dust and wasn't replaced in time, restricting airflow and making the engine work harder, thus consuming more fuel; the spark plugs are old, haven't been replaced for tens of thousands of kilometers, causing delayed ignition and poor combustion, leading to higher fuel consumption; the tires might be leaking or underinflated, increasing rolling resistance and naturally consuming more fuel; hot weather leads to more air conditioning use, and the compressor's increased load definitely raises fuel consumption; issues in the fuel system, like clogged fuel injectors or using low-quality fuel, result in inefficient combustion and higher energy consumption; sometimes, congested road conditions with frequent stops and starts also increase fuel usage. Check the air filter, inspect the spark plugs' condition, measure the tire pressure, and if necessary, send it for repair—it saves money and prevents minor issues from becoming major problems.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

When Do You Need to Replace Brake Pads?

Replacement of brake pads is required under the following circumstances: 1. Listen to the car's sound when braking: Once the owner hears the friction between iron and wire when lightly pressing the brake, the car's brake pads need to be replaced. If the brake pads are not replaced in time, it is easy to cause a traffic accident due to brake failure. 2. Check the thickness of the brake pads: Because the brake pads have a certain thickness, when we use the brakes, the thickness of the brake pads will become thinner. The thickness of new brake pads is generally 15 millimeters. If the thickness of the brake pads is only one-third, in other words, 5 millimeters, then there is no doubt that the brake pads need to be replaced. In addition, since the brake pads and brake discs are in a relative friction relationship, when the brake pads are severely worn, we should also promptly check whether the brake discs are also severely worn. 3. Rely on the feeling of your braking foot: Because after using the brake pads for a long time, the owner will feel that the car's response is very slow after stepping on the brake system, and the force of stepping on the brake is relatively light. This is because the brake pads become thinner after prolonged use. At this time, the brake pads must be replaced in time.
20
5
Share

Do Car Airbags Require Maintenance?

Airbags have a lifespan of over 10 years, and can even be said to last as long as the vehicle itself, requiring no special maintenance. Here is some information about the airbag system: 1. The airbag system is a passive safety protection system that, when used in conjunction with seat belts, provides effective collision protection for occupants. 2. In the event of a car collision, airbags can reduce head injuries by 25% and facial injuries by approximately 80%. 3. Airbags are one-time-use products; after deployment in a collision, they lose their protective capability and must be sent back to the manufacturer for replacement with a new airbag.
4
0
Share

Can National II Emission Standard Vehicles Be Driven on the Road in Beijing?

National II vehicles in Beijing are subject to traffic restrictions but can be driven during certain specific time periods. Below are the specific details regarding the traffic restrictions for National II vehicles in Beijing: 1. Starting from February 15, 2017, Beijing has implemented weekday traffic restrictions within the Fifth Ring Road for both local and non-local National I and National II emission standard light-duty gasoline vehicles. 2. For vehicles that violate the regulations by entering the restricted areas, the traffic management department will impose a fine of 100 yuan, with penalties calculated every 4 hours, in accordance with relevant laws. 3. The Beijing Environmental Protection Bureau and the Traffic Management Bureau have completed the integration of the database for local and non-local National I and National II light-duty gasoline vehicles with the traffic law enforcement system. After the implementation of the traffic restrictions, the traffic management department will enforce the regulations through a combination of on-site and non-on-site law enforcement methods.
18
2
Share

What are the car brands produced in the United States?

American-produced cars include the following brands: 1. Ford Motor Company: Ford is a multinational automobile manufacturer founded by Henry Ford in Dearborn, Michigan, USA. 2. Chevrolet: Chevrolet is an automobile brand under General Motors, founded by William Durant and Louis Chevrolet. 3. Cadillac: Cadillac is a luxury automobile brand under General Motors, born in 1902 in Detroit, known as the Motor City of America. 4. Lincoln: Lincoln is a luxury automobile brand under Ford Motor Company, founded in 1917 by Henry Leland. 5. Jeep: Jeep is an automobile brand. The world's first Jeep off-road vehicle was produced in 1941 for the U.S. military during World War II. It has an 80-year history. Chrysler Corporation, as the originator of Jeep, exclusively owns this trademark.
10
4
Share

What is the best way to repair car paint scratches?

The main methods for repairing car paint scratches are as follows: 1. Use a car paint scratch repair agent, which can quickly repair the damaged part of the paint, but it is only suitable for minor scratches. 2. Use toothpaste to repair the scratches. Toothpaste has a polishing function, which is equivalent to applying a layer of wax to the car, providing a good repair effect. However, toothpaste can only be used for minor scratches. 3. Use a touch-up pen to cover the scratches, making them less noticeable. However, the result is not as good as the original factory paint, and the durability is also inferior. It is only suitable for local touch-ups.
12
2
Share

Where is the Three-Way Catalytic Converter Located in a Sedan?

The three-way catalytic converter is located at the front end of the engine exhaust pipe, between the front and rear oxygen sensors. Below is additional information about the three-way catalytic converter: 1. The function of the three-way catalytic converter is to convert harmful gases in automobile exhaust, such as CO (carbon monoxide), HC (hydrocarbons), and NOx (nitrogen oxides), into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Because this catalytic converter can simultaneously transform the three main harmful substances in exhaust gases into harmless substances, it is called a three-way catalytic converter. 2. After prolonged use, substances like carbon deposits from the exhaust may adhere to the porous ceramic carrier of the three-way catalytic converter. Over time, this can lead to the risk of clogging. If the three-way catalytic converter becomes clogged, cleaning is the only way to restore its optimal performance.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.