What Causes a Sudden Increase in Fuel Consumption for Isuzu Diesel Vehicles?

2 Answers
EdwardLynn
07/24/25 2:01am
Isuzu diesel vehicles may experience a sudden increase in fuel consumption due to oil burning. 1. Causes and consequences: If the vehicle exhibits unstable idling, weak acceleration, accompanied by increased fuel consumption and excessive exhaust emissions, it is likely experiencing "oil burning," where engine oil enters the combustion chamber and participates in combustion. This not only weakens the vehicle's performance but can also lead to insufficient engine lubrication in severe cases, causing irreversible damage. 2. Solution: If the clearance between the valve and the guide increases, the oil lubricating the valve rocker arm can be drawn into the combustion chamber through this gap and participate in combustion. Therefore, if this gap is found to be enlarged during routine maintenance, it should be replaced promptly.
Was this review help?
19
0
Share
VanGraham
08/10/25 9:40pm
My Isuzu diesel vehicle has recently experienced a sudden surge in fuel consumption, and the fuel tank seems to empty much faster than before. There could be several reasons for this: First, the air filter might be clogged—excessive dust can restrict air intake, making the engine work harder and naturally increasing fuel consumption. Second, there could be an issue with the fuel system, such as excessive carbon buildup in the fuel injectors or poor fuel spray, leading to incomplete combustion. Additionally, low tire pressure can increase rolling resistance, which also contributes to higher fuel consumption. Lastly, check if the EGR valve or sensors are malfunctioning—Isuzu diesel vehicles rely heavily on these components. I remember the issue improved significantly after I cleaned the air filter last time, but if the problem persists, it’s best to take it to a professional shop to inspect the chassis and wiring. Poor maintenance can lead to accumulated minor issues, causing a sudden spike in fuel consumption. With fuel prices so high these days, addressing the problem early can save a lot of money. Also, pay attention to driving habits—avoid frequent hard acceleration and maintain a smoother driving style to help reduce fuel consumption.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

How to Measure an Oxygen Sensor?

The measurement method for an oxygen sensor is: 1. Unplug the oxygen sensor connector and measure the resistance between pins 1 and 2 on the sensor side using the resistance setting of a multimeter; 2. Locate the oxygen sensor signal wire and insert copper wires from the cable into the corresponding pin holes; 3. Reconnect the connector and measure the voltage between the copper wire and the negative terminal using the DC voltage setting of the multimeter; 4. Start the engine and let the coolant temperature reach above 80°C, then maintain the engine speed at 2500 rpm multiple times and observe the voltage displayed on the multimeter. The oxygen sensor is a critical feedback sensor in the electronic fuel injection engine control system, serving as a key component for controlling vehicle exhaust emissions, reducing environmental pollution, and improving fuel combustion quality in the engine.
14
1
Share

What are the characteristics of front-wheel drive?

The characteristics of front-wheel drive include: 1. Eliminating the need for a driveshaft allows the combination of the transmission, clutch, and main reducer of the drive axle, reducing the number of components in the drivetrain and saving space; 2. The engine and drivetrain are located at the front of the vehicle, shifting the center of gravity forward during braking, making the front wheels less prone to locking during emergency braking; 3. The front seats offer better comfort than the rear seats; 4. The front wheels serve as both the driving and steering wheels, making it easier to control the direction during turns and reducing the likelihood of oversteering, thereby enhancing steering safety; 5. The absence of a driveshaft results in a flatter floor inside the car, creating a more spacious interior.
4
4
Share

Do front-wheel drive cars brake with the front or rear wheels?

Front-wheel drive cars brake with both the front and rear wheels, with the front wheels providing the primary braking force and the rear wheels assisting. The functions of the braking system are: 1. To forcibly decelerate or stop a moving vehicle as required by the driver; 2. To keep a parked vehicle stable under various road conditions; 3. To maintain a stable speed for a vehicle going downhill. Front-wheel drive, also known as front-engine front-wheel drive, refers to a car design where the engine drives only the front wheels. Its characteristics include: 1. Reduced vehicle weight; 2. Increased interior space; 3. Front-wheel drive cars have a transversely mounted engine; 4. Front-wheel drive cars do not have a differential on the rear axle.
4
1
Share

What is the reason for the Baojun 730 air conditioning not cooling?

The reasons for the Baojun 730 air conditioning not cooling are: 1. Lack of refrigerant; 2. Damaged air conditioning flap; 3. Dirty condenser; 4. Aged or loose belt. The Baojun 730 is a 5-door, 7-seater MPV with body dimensions of: length 4780mm, width 1780mm, height 1740mm, and a wheelbase of 2750mm. The Baojun 730 is equipped with a 1.5L turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 108 kW and a maximum torque of 250 Nm. It features front-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension using a torsion beam non-independent suspension.
18
0
Share

What does AST mean in cars?

AST in cars refers to the automatic search and storage of radio stations. When AST is used, it automatically memorizes the frequencies of stations with signals. You can select stations by pressing the button, and long-pressing this key will automatically store the radio stations. The method to set up the car radio is: 1. After starting the vehicle, find the central control screen and swipe right to locate the car radio operation interface; 2. Click the play button to turn on the car radio; 3. Click AST to activate the automatic channel search function; 4. Press the stop button at the finger position to stop the radio search. The method to adjust the car radio volume is: Rotate the knob clockwise or counterclockwise to increase or decrease the volume. Press the knob to mute, and press it again to restore the sound.
9
4
Share

What Causes Squeaking After Replacing Brake Pads?

Squeaking after replacing brake pads can be caused by: 1. The brake pads being made of harder material; 2. Improper installation of the brake system. The method for replacing brake pads is: 1. Lift the car and remove the tire; 2. Unscrew the fixing bolts on the brake caliper and remove the brake caliper; 3. Remove the old brake pads and push back the brake caliper piston; 4. Clean the brake disc mounting bracket and install the new brake pads. Ways to determine if brake pads need replacement include: 1. The brake pad thickness is reduced to one-third of the original; 2. There is abnormal noise when lightly braking; 3. The braking response is sluggish, and the braking force is weakened.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.