What Causes a Strong Gasoline Smell?

1 Answers
FinleyAnn
07/29/25 4:36pm
When a car emits a strong gasoline smell upon starting, it is mainly due to the following reasons: 1. Incomplete combustion of gasoline: A heavy gasoline smell after starting the car, which disappears after the engine warms up, is a normal phenomenon. This occurs because the combustion efficiency is poor when the car first starts. During a cold start, the water temperature and exhaust pipe temperature are low, leading to a richer air-fuel mixture. As a result, some of the mixture does not burn completely and is expelled through the exhaust pipe, causing a noticeable gasoline smell. 2. Aging rubber hoses: Rubber hoses in the engine compartment can deteriorate over time, especially in older vehicles. Once they age, gasoline may leak into the engine compartment, and the air conditioning system can draw the smell into the cabin. Therefore, aged rubber hoses should be replaced promptly. 3. Leaking gasoline pipe connections: If the connections in the gasoline pipes develop leaks, gasoline fumes can enter the cabin through the air conditioning system. If you detect a gasoline smell inside the car, it is advisable to inspect the connections in the gasoline lines.
Was this review help?
16
0
Share
More Forum Discussions

In which state does a car emit the most carbon monoxide?

When a car is idling with the engine running, it emits the most carbon monoxide. This is because the car's engine combustion chamber operates at high temperatures, which makes it more prone to producing carbon monoxide. When the engine is left running while the car is stationary, the combustion process continues without performing work, causing the combustion chamber temperature to rise even higher and resulting in increased carbon monoxide emissions. Car emissions have a significant impact on the environment. To reduce car emissions, it is advisable to turn off electrical appliances such as the radio, window heating, and air conditioning after exiting the vehicle. Otherwise, these devices will automatically turn on when the car is restarted. Vehicle emission standards refer to regulations that limit the amount of harmful gases such as CO, HC plus NOx, and PM emitted from car exhaust.
11
4
Share

What is the reason for the engine malfunction yellow light always being on?

Engine malfunction yellow light always being on is because the ECU is alerting that there is a fault in the engine, which is an abnormal phenomenon. The following are the reasons for the engine yellow light being on: 1. Sensor issues. Including water temperature, crankshaft position, air flow, intake temperature, oxygen sensor, etc. When these sensors are damaged, have poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine malfunction light to come on. 2. Maintenance issues. Poor engine maintenance is the most common cause of the engine malfunction light coming on. Vehicles have a certain maintenance cycle. If the owner does not perform maintenance on time, coupled with poor driving habits, it will increase the burden on the engine operation, and eventually, it can only be reminded by the yellow light. 3. Oil quality issues. Including fuel and engine oil. The fuel filled in the car generally has a grade, and the engine oil is also divided into semi-synthetic and full synthetic. The manufacturer usually recommends which grade of fuel and which type of engine oil the owner should use. If the owner does not add as required, it will cause engine wear in the long run. 4. Poor combustion of the mixture. Engine spark plug failure, ignition coil failure, fuel pump failure, fuel line blockage, etc. will all cause poor combustion of the engine mixture.
19
2
Share

What are the differences between the Volkswagen Passat 280 and 330?

Volkswagen Passat 280 and 330 have the following differences: 1. Different power: The Volkswagen Passat 280 is equipped with a 1.4T turbocharged engine with a maximum power of 110KW; the 330 is equipped with a 2.0T turbocharged engine with a maximum power of 137KW. 2. Different engine models: The Volkswagen Passat 280 engine model is EA211DJS; the 330 engine model is EA888DPL. The body dimensions of the Volkswagen Passat 280 and 330 are the same: length 4933mm, width 1836mm, height 1469mm, wheelbase 2871mm, and fuel tank capacity 68.5 liters.
20
5
Share

How to Distinguish Emission Standards for Sedans?

You can check the vehicle emission standards through the following methods: 1. Look at the label sticker behind the vehicle's environmental protection qualification mark to easily view the emission standard; 2. The vehicle certification mark starts with this page, which includes an emission standard description, but it is not directly written as National Standard X. Instead, it is a string of characters. You can then search online for the meaning of this string; 3. You can estimate the vehicle's emission standard based on its model year or verify it by bringing the vehicle registration certificate to the local vehicle management office. Here is additional information: According to the new regulations issued by the Ministry of Environmental Protection, starting from July 1, 2020, all newly sold and registered vehicles must comply with the China 6a standard; from July 1, 2023, all newly sold and registered vehicles must comply with the China 6b standard.
17
3
Share

How to Adjust Unequal Left and Right Kingpin Inclination Angles?

Different suspension designs have varying definition points for the kingpin inclination angle. For MacPherson suspensions, the caster angle is defined by the suspension's top mount (hard point) and the steering knuckle, while for double-wishbone suspensions, it is defined by the spherical universal joints at the upper and lower ends of the steering knuckle. The kingpin inclination angle is the central rotation axis when the tire rotates. Additional information: 1. When viewed from the side of the vehicle, if the kingpin is tilted backward, it is a positive caster angle (positive-caster); if tilted forward, it is a negative caster angle (negative-caster). 2. The kingpin inclination angle primarily affects handling in two ways: first, its impact on the camber angle, and second, steering feedback and straight-line stability. Regarding the camber effect, assuming a positive caster angle, during steering, the inner half-shaft moves downward relative to the road surface, while the outer half-shaft moves upward. Thus, the kingpin can be considered the rotation center of the wheel hub. 3. Different suspension designs require different methods to adjust the kingpin angle. For MacPherson suspensions, adjustments are made by altering the hard point (top mount), whereas for double-wishbone suspensions, shims are added to the upper control arm for adjustment.
12
4
Share

What is the best way to start a car with push-button start?

The following are the best steps to start a car with push-button start: 1. First, after the driver sits in the driver's seat, press the start button once to turn on the ACC light, then press it again to initiate the vehicle's self-check; 2. Second, press the brake pedal and push the start button to ignite the engine; 3. Third, release the foot brake and choose to warm up the car (the warm-up time depends on the vehicle model and ambient temperature, but avoid sudden acceleration and braking in low-temperature conditions); 4. Fourth, press the brake pedal again, shift to D gear, and release the handbrake (for electronic handbrakes, simply press the button briefly); 5. Fifth, slowly release the foot brake, gently press the accelerator, and complete the start.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.