What causes a motorcycle to start and then stall after a few noises?

1 Answers
LeWalter
07/30/25 9:14am
The reasons why a car starts and then stalls can be attributed to the following 4 points: Stalling caused by excessive carbon deposits: Carbon deposits usually accumulate in the throttle, spark plugs, cylinders, fuel lines, intake ducts, etc. They are a coking-like substance produced when fuel is exposed to high temperatures. General physical methods are difficult to remove them, and specialized cleaning agents are required for cleaning. Poor fuel quality and clogged fuel injectors: Using low-quality fuel not only produces more carbon deposits but may also clog the fuel injectors, resulting in poor atomization. Additionally, low-quality fuel directly affects combustion efficiency, increasing fuel consumption. The carbon monoxide formed from incomplete combustion can accumulate inside the vehicle and may even lead to poisoning. Spark plug carbon deposits and insufficient ignition voltage: Carbon deposits on spark plugs can be removed using a combination of physical and chemical methods. Insufficient ignition voltage can be resolved by replacing the spark plugs to address the voltage deficiency.
Was this review help?
15
0
Share
More Forum Discussions

Is it necessary to transfer the file for taking the fourth subject exam in another location?

It is necessary to transfer the file for taking the fourth subject exam in another location. If you encounter any issues, you can file a complaint with the transportation management bureau, the governing body of the original driving school. The fourth subject exam, also known as the theoretical exam for drivers, is part of the motor vehicle driver's license assessment. The test consists of 50 questions, primarily in the form of case studies, images, animations, etc., with a full score of 100 and a passing score of 90. You need to bring your ID card to the vehicle management office in the city you are transferring to. Make sure it is an office that handles inter-city transfers, as some cities have multiple branch offices, and not all of them accept inter-city transfer applications. It is advisable to call ahead and confirm whether the office can process inter-city transfers. To apply for taking the fourth subject exam in another location, simply bring your ID card to the vehicle management office in your current residence to complete the exam location change procedure. There is no need to return to the original exam location, nor is it necessary to submit additional documents such as a residence permit or temporary residence permit. Additionally, you only have one chance to change the exam location. After the change, all remaining subject exams and the license collection must be completed in the new city.
20
2
Share

What are the effects of exhaust pipe leakage?

The effects of exhaust pipe leakage include: 1. If the leakage occurs in the front section, it will reduce the exhaust backpressure, leading to a weaker engine performance, difficulty in starting, and increased fuel consumption; 2. If the leakage is in the middle section, the water produced by the exhaust pipe will corrode it over time, causing rust and, in severe cases, even breakage. The exhaust pipe is a device designed to reduce vibration and noise, facilitate installation, and extend the lifespan of the exhaust muffler system. It is installed between the engine exhaust manifold and the muffler, providing a flexible connection for the entire exhaust system. The exhaust pipe is mainly used in light vehicles, compact cars, buses, motorcycles, etc.
6
3
Share

How to Adjust the Seat Height of Hongqi HS5?

Hongqi HS5 seat height adjustment method: There are adjustment buttons on the side of the seat. The round button is for lumbar support adjustment, the middle button is for adjusting the seat's forward/backward position and height, and the right button can be pushed forward or backward to adjust the backrest vertically or flatten it. The Hongqi HS5 is an SUV model with body dimensions of 4760mm in length, 1907mm in width, and 1700mm in height, with a wheelbase of 2870mm. In terms of power, the Hongqi HS5 is equipped with a 2.0T turbocharged engine, which enables it to achieve a faster 0-100 km/h acceleration time compared to BBA models. The car can accelerate from 0 to 100 km/h in 8.2 seconds.
13
4
Share

How Often Should a Car's Timing Belt Be Replaced?

The timing belt of a car should be replaced every 60,000 kilometers. Damage to the timing drive system components can cause the vehicle to break down while driving, and in severe cases, it may lead to engine damage. The timing belt is a crucial part of the engine's valve train system, ensuring the accuracy of intake and exhaust timing by connecting to the crankshaft and maintaining a specific transmission ratio. As a wear-and-tear component, if the timing belt breaks, the camshaft will not operate in sync, potentially causing the valves to collide with the pistons and resulting in severe damage. Therefore, it is essential to replace the timing belt according to the mileage or time interval specified by the manufacturer. The maintenance intervals prescribed by different car manufacturers vary by model, so the specific replacement cycle should adhere to the manufacturer's recommendations.
18
1
Share

How to Reset the Tire Pressure Light on Volkswagen Lavida?

The method to reset the tire pressure light on Volkswagen Lavida is as follows: 1. Locate and press the instrument information switch button on the multifunction steering wheel; 2. The car's tire pressure information will appear on the dashboard. If the tire pressure is abnormal, a tire pressure warning will also be displayed here. Then, press the RES plus button on the multifunction steering wheel; 3. Switch to the tire pressure monitoring setup interface and click the reset button to complete the tire pressure monitoring reset. The Lavida is a compact sedan produced by SAIC Volkswagen. It features a MacPherson strut front suspension and a torsion beam semi-independent rear suspension. The vehicle dimensions are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm.
2
3
Share

How Many Kilometers Should a Car's Oil Filter Be Replaced?

Car oil filters generally need to be replaced every 5,000 kilometers or so. The specific replacement intervals are as follows: engine oil and oil filters should be replaced approximately every 5,000 kilometers, while air filters and fuel filters require replacement every 10,000 kilometers. The gasoline filter, also known as the fuel filter, is part of the engine's lubrication system. Its main function is to filter out water and impurities from the gasoline. There are two types: carburetor-style and fuel injection-style. Oil filters typically have three stages: the oil strainer, the oil coarse filter, and the oil fine filter. The strainer is installed in the oil pan before the oil pump and usually employs a metal mesh design. The coarse filter is installed after the oil pump and is connected in series with the main oil passage. The fine filter is installed after the oil pump and is connected in parallel with the main oil passage. It mainly includes two types: microporous filter paper and rotor-style filters.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.