What Causes a Motorcycle to Pull to One Side When Braking?

What is the correct way to use automatic headlights?

Automatic headlights are used correctly as follows: The headlight switch is located on the light control lever. Turn the switch to the AUTO position to activate the automatic headlight function. When driving at night or entering a tunnel, the headlights will automatically turn on or off based on the situation. Automatic headlights are a convenience feature installed by some manufacturers, which include a light-sensing control system on the front headlights. When the light-sensing control system detects that the external light intensity is above or below a certain threshold, it sends an electronic signal to the ECU to control the headlights' activation or deactivation. After enabling the automatic headlight function, the light sensor detects the intensity of ambient light and automatically turns the car's headlights on or off based on the surrounding brightness, allowing the driver to focus more on driving and enhancing road safety.

12

2

Share

How to reset the maintenance light on the Ford Escort?

The method to reset the maintenance light on the Ford Escort: 1. Enter the dial panel of the vehicle's infotainment system; 2. Input the password 75315908 into the dial panel of the vehicle's infotainment system; 3. The vehicle will then display a message indicating that the current maintenance has been reset. Finally, click the confirm button to complete the maintenance light reset. The Ford Escort has body dimensions of 4587mm in length, 1825mm in width, and 1490mm in height, with a wheelbase of 2687mm. The 2017 Changan Ford Escort is equipped with a 1.5L four-cylinder naturally aspirated engine, which has a maximum power output of 83 kilowatts and a maximum torque of 142 Newton-meters. In terms of transmission, it is matched with a 6-speed automatic manual transmission.

11

0

Share

What to Do About Brake Noise in the New Elysee?

The solution to brake noise in the new Elysee: The braking system of the Dongfeng Citroen Elysee uses rear drum brakes. This design can cause noise from the rear wheels when the brakes are applied if there is insufficient lubricant. Therefore, adding lubricant to the braking system can resolve the issue. Additionally, brake pads that are too hard in material can also cause noise during braking. New cars, in particular, require a break-in period to reduce such noises. The dimensions of the new Elysee are 4427mm in length, 1748mm in width, and 1476mm in height, with a wheelbase of 2652mm.

11

1

Share

How to Determine the Condition of a Condenser?

Methods to determine the condition of a condenser: First, check the cleanliness of the condenser pipes and cooling fins. Then, inspect the condenser joints or conduits for any damage to prevent refrigerant leakage. Additionally, examine the condenser housing and cooling fin housing for any deformation or breakage. Finally, if oil stains appear on the condenser, there is definitely a leak. The condenser is a component of the refrigeration system and a type of heat exchanger that converts gas or vapor into liquid, transferring heat from the tubes to the surrounding air quickly. The working process of the condenser is an exothermic process, so the temperature of the condenser is generally high.

12

5

Share

What Causes the Electric Power Steering Wheel to Become Heavy?

The reasons why the electric power steering wheel becomes heavy: 1. If it is hydraulic power steering, the common reason is that the power steering fluid is dirty, which can cause the steering wheel to become increasingly heavy. Additionally, insufficient power steering fluid can also make the steering wheel feel heavy, so the power steering fluid should be replenished or replaced promptly; 2. If it is electric power steering, check whether the fuse is blown, or if there is an open circuit or a short to ground in the wiring; 3. If it is electric power steering, repeatedly turning the steering wheel while stationary or at low speeds places an extremely high load on the power steering system, which can easily cause the steering gear to overheat and enter a protective mode, resulting in heavy steering. It will return to normal after cooling down, which is a normal phenomenon; 4. If the electric power steering feels heavy, it is recommended to check whether the plain bearing above the shock absorber is functioning properly, or if the alignment data deviation is too large, which can also cause the steering wheel to become heavy; 5. Insufficient tire pressure can also make the driver feel that the steering wheel has become noticeably heavier. Simply inflating the tires to the standard pressure will restore normal operation.

17

1

Share

How to Turn Off BMW's Auto Start-Stop Function?

BMW's auto start-stop function button is located below the engine start button. You need to manually press the 'A off' button to turn the auto start-stop function on or off. After the car is started, the auto start-stop function will automatically activate by default. If you do not wish to use this function, you can manually turn it off before driving. The button light on indicates that the start-stop function is off, while the light off means the function is active. The engine start-stop function is primarily designed to save fuel and reduce fuel consumption. The BMW 5 Series has body dimensions of 5047mm in length, 1860mm in width, and 1491mm in height, with a wheelbase of 3108mm.

4

0

Share

What Causes a Motorcycle to Pull to One Side When Braking?

What is the correct way to use automatic headlights?

How to reset the maintenance light on the Ford Escort?

What to Do About Brake Noise in the New Elysee?

How to Determine the Condition of a Condenser?

What Causes the Electric Power Steering Wheel to Become Heavy?

How to Turn Off BMW's Auto Start-Stop Function?

What does DTE mean on a car?

How to Determine if a Car Water Pump is Faulty?

Where is the sunroof fuse located in the Chrysler 300c?

How many seats does the Baojun 510 have?