What Causes a Mazda 6 to Suddenly Stall While Driving?

2 Answers
EstherLee
07/25/25 12:50am
The situation where a Mazda 6 stalls while driving is mostly caused by the following reasons: 1. Reason one: Due to issues with the ECU control logic. This requires the manufacturer to perform corresponding software upgrades. 2. Reason two: Malfunction in the fuel supply system. For example, a faulty fuel injection pump leading to inability to inject fuel, or a faulty fuel injection line causing delayed fuel supply. Below is relevant information about the Mazda 6: 1. Body dimensions: The Mazda 6 has a body length of 4670 mm, body width of 1780 mm, body height of 1435 mm, wheelbase of 2675 mm, front track of 1540 mm, rear track of 1540 mm, minimum ground clearance of 150 mm. The vehicle is a four-door, five-seater sedan with a fuel tank capacity of 64 liters and a trunk capacity of 500 liters. 2. Powertrain: The Mazda 6 is a midsize sedan equipped with a 2.0-liter naturally aspirated engine. The engine delivers a maximum horsepower of 147, maximum power of 108, and maximum torque of 183. It uses 92-octane gasoline with multi-point fuel injection. Both the engine block and cylinder head are made of aluminum alloy, paired with either a manual transmission or an automatic transmission.
Was this review help?
11
1
Share
DelMadelyn
08/10/25 3:55pm
My old Mazda6 stalled several times while driving, which was really frustrating. The most common causes were: 1) fuel pump failure - prolonged use leads to aging and insufficient fuel supply; 2) faulty electronic sensors - like when the crankshaft position sensor fails, it cuts off the ignition system; and 3) poor electrical connections - loose battery terminals or relay issues. That time it stalled on the highway due to a clogged fuel filter causing fuel interruption, luckily I managed to pull over in time. Regular maintenance is key - inspect the fuel system and sensors every 20,000 km. In emergencies, immediately turn on hazard lights and stop in a safe spot, don't force a restart. This car is sensitive to fuel quality, so I always use reputable gas stations, which has reduced such issues.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

How to Turn Off the Car Air Conditioning?

Methods to turn off the car air conditioning: Turn the knob all the way to the left to turn off the air conditioning, or press the menu button below the AUTO button on the air conditioning panel. The air conditioning control interface will appear on the central display screen, and there is an OFF button in the lower left corner. Click it to turn off the air conditioning. The AC in the car air conditioning system is the switch for the compressor. The car air conditioning system includes not only the compressor but also the condenser, evaporator, and expansion valve. To quickly lower the temperature inside the car during summer, you can adjust the position of the air vents. According to the principle of air convection, hot air rises while cold air sinks. Drivers should aim the air vents slightly upward, utilizing the principle that hot air rises and cold air sinks. As the cold air descends, it can rapidly cool the interior of the car. Additionally, avoid placing decorations in front of the air vents, as this can affect the cooling efficiency of the air conditioning.
9
2
Share

What are the main faults of a car clutch?

The main faults of a car clutch: 1. Clutch slipping: When the clutch slips, the main symptom is that the vehicle speed does not increase with the engine speed during acceleration, resulting in insufficient power and difficulty climbing slopes; 2. Clutch not disengaging or incomplete disengagement: The symptom of a clutch not disengaging is that the clutch disc and pressure plate do not separate, making gear shifting difficult and causing gear collision noises; 3. Clutch shuddering: The symptom of clutch shuddering is shaking during startup, leading to instability and causing the entire vehicle to shake; 4. Clutch abnormal noise: The symptom of clutch abnormal noise is unusual sounds when the clutch engages or disengages.
3
0
Share

What is the function of a car air conditioning filter?

The function of a car air conditioning filter is to separate solid impurities such as dust, pollen, and grinding particles from the air, as well as to adsorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, and other substances in the air, providing strong and long-lasting adsorption. There are two types of air conditioning filters: one without activated carbon and another with activated carbon. The activated carbon air conditioning filter can absorb particulate matter, alleviate respiratory discomfort, reduce irritation for allergy sufferers, enhance driving comfort, and protect the air conditioning cooling system. Generally, the air conditioning filter should be replaced every 10,000 to 15,000 kilometers, but the actual usage conditions should be considered. If the filter appears excessively dirty, it should be replaced promptly.
5
4
Share

What are the symptoms of a clogged automotive expansion valve?

Automotive expansion valve clogging symptoms include: poor cooling performance, frost formation behind the valve, and abnormal compressor operation noise. The expansion valve is a crucial component in the refrigeration system, typically installed between the liquid receiver and the evaporator. It converts medium-temperature, high-pressure liquid refrigerant into low-temperature, low-pressure wet steam through throttling, enabling the refrigerant to absorb heat in the evaporator for cooling effect. The expansion valve consists of three main parts: valve body, temperature sensing bulb, and balance tube. Its features include: 1. Advanced dual-flow balanced port design; 2. Reduced system components by eliminating the need for separate check valves and solenoid valves; 3. Dynamic static superheat adjustment based on condensing pressure or pressure drop across the valve; 4. Stable superheat characteristics ensuring system operational stability.
19
5
Share

How often should tires be replaced on a new car?

For new car tires, manufacturers generally recommend replacement every 3 to 5 years for safety reasons. Tires are circular elastic rubber products mounted on various vehicles or machinery that roll on the ground. They are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high/low temperature effects during driving. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning properties. Any brand of tire will have wear indicators at the bottom of the tread grooves. For ordinary car tires, the wear indicator height is 1.6 millimeters, which is also the legally mandated minimum tread groove depth. For truck tires, the wear indicator height is 2.4 millimeters.
6
5
Share

Where is the VIN number of Dongfeng Nissan?

Dongfeng Nissan's VIN number is located at the lower left corner of the driver's side windshield, starting with English letters. The 17-digit alphanumeric code is the VIN. The first 3 digits of the VIN represent the World Manufacturer Identifier, digits 4 to 9 are the vehicle descriptor section, and digits 10 to 17 are the vehicle identifier section. The Dongfeng Nissan Kicks is positioned as a compact SUV, with body dimensions of 4295mm in length, 1760mm in width, and 1588mm in height, and a wheelbase of 2620mm. The Dongfeng Nissan Kicks is equipped with the newly upgraded third-generation HR15 all-aluminum engine.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.