What Causes a Car to Stall Automatically?

1 Answers
MacBenjamin
07/25/25 12:12pm
The reasons for a car stalling automatically are: 1. Misoperation; 2. Dirty throttle idle motor; 3. Fuel system failure; 4. Ignition system failure; 5. Use of substandard fuel causing carbon deposits in the engine; 6. Generator or battery power supply system failure. The throttle is a controllable valve that regulates air intake into the engine. After entering the intake pipe, the air mixes with gasoline to form a combustible mixture, which then burns to perform work. The generator's role is to supply power to all electrical equipment except the starter while the engine is running normally, and simultaneously charge the battery to compensate for the power consumed during startup, ensuring the battery has sufficient charge for the next engine start.
Was this review help?
1
3
Share
More Forum Discussions

Where is the MG ZS engine from?

The MG ZS engine is independently developed by SAIC as part of their Blue Core powertrain series. Key technical features of this engine include centrally-mounted direct fuel injection system, dual variable valve timing, variable oil pump, water-cooled exhaust manifold, and all-aluminum cylinder block. The MG ZS represents MG Motor's first internet-connected SUV model, with body dimensions measuring 4313mm in length, 1809mm in width, and 1648mm in height, featuring a 2580mm wheelbase. The vehicle is equipped with a 6-speed automatic transmission. In terms of exterior design, its large front grille exhibits sculptural three-dimensionality, seamlessly integrated into the sharply sloping hood that tightly connects with upper and lower body surfaces.
4
5
Share

What is the maximum speed of the Cadillac CT5?

The maximum speed of the Cadillac CT5 can reach 180 km/h. Below is relevant information about vehicle speed: 1. Definition of vehicle speed: Vehicle speed refers to the distance a vehicle travels per unit of time, commonly measured in kilometers per hour (km/h) or meters per second (m/s). 2. Speed regulations for vehicles: Motor vehicles must not exceed the speed limit indicated by road signs. On roads without a centerline, the speed limit is 30 km/h in urban areas and 40 km/h on highways. On roads with only one lane in the same direction, the speed limit is 50 km/h in urban areas and 70 km/h on highways. When making turns, the maximum speed for motor vehicles must not exceed 30 km/h.
14
1
Share

Why does the Sonata 8 consume so much fuel?

Sonata 8's high fuel consumption can be attributed to the following specific reasons: 1. Excessive vehicle load: The high fuel consumption of the Sonata 8 may be caused by carrying too many items in the vehicle. Reduce the vehicle's load and avoid keeping unnecessary items in the car. 2. Poor driving habits: Bad driving habits can also easily lead to high fuel consumption. Try to avoid sudden acceleration and braking, especially when starting the car, as sudden acceleration can significantly increase fuel consumption. 3. Poor control of road conditions and speed: Frequently driving on mountain roads or congested areas where speed is hard to control can also lead to increased fuel consumption. Try to maintain the vehicle within the economical speed range, which is approximately 70~90 KM/h.
14
1
Share

What are the length, width, and height of the Lingpai?

The length, width, and height of the Lingpai are 4756mm, 1804mm, and 1509mm respectively, with a front track of 1500mm, rear track of 1485mm, and a wheelbase of 2730mm. The Lingpai is a compact mid-size sedan under GAC Honda, equipped with a 1.0T three-cylinder turbocharged engine that delivers a maximum power of 90kW and a maximum torque of 173Nm. In terms of the transmission system, the car is paired with a CVT continuously variable transmission and a 6-speed manual transmission. The front suspension features a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension.
1
5
Share

What is the Function of a Central Differential Lock?

The function of a central differential lock: It can enhance the vehicle's off-road capability on poor road surfaces. When one of the vehicle's drive axles spins freely, it can quickly lock the differential, turning the two drive axles into a rigid connection. This allows most of the torque to be transferred to the non-slipping drive axle, fully utilizing the traction to generate sufficient driving force, enabling the vehicle to continue moving. The central differential lock, also known as the central differential locker, is a locking mechanism installed on the central differential, used in four-wheel-drive vehicles. Different differentials employ various locking methods. Common differential locks include the following types: forced locking, high-friction self-locking, jaw coupling, Torsen, and viscous coupling.
10
0
Share

What is the working principle of the intake pressure sensor?

The working principle of the intake pressure sensor: It detects the changes in the absolute pressure in the intake manifold based on the engine speed and load, then converts it into a signal voltage and sends it to the engine control unit. The engine control unit uses this signal voltage to determine the basic fuel injection quantity. There are various types of intake pressure sensors, including piezoresistive and capacitive types. Due to its fast response time, high detection accuracy, small size, and flexible installation, the piezoresistive type is widely used in D-type injection systems. The pressure sensor measures pressure using a pressure chip, which is the core component of the sensor.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.