What Causes a Car Refrigerator to Stop Cooling?

1 Answers
DelAustin
07/24/25 1:09pm
Reasons for a car refrigerator not cooling include the power socket not being properly plugged in, voltage below 187 volts, the refrigerator's low-temperature switch not being turned on, etc. Solutions include checking if the power connection is normal, opening the door to observe if the interior light is on, or testing with an electric pen; if the power connection is normal, listen to see if the compressor is working; determine if there is refrigerant in the cooling system; if the refrigerator is of the indirect cooling type, check if the fan is working. A car refrigerator refers to a portable cooler that can be carried in a car, a smart item that has become popular in the international automotive market in recent years. The fan blows cold air into the freezer and refrigerator compartments to achieve cooling. Car refrigerators are an extension of household refrigerators, utilizing semiconductor electronic cooling technology or compressor cooling, generally producing little noise and pollution. While driving, simply plug the power plug into the cigarette lighter socket to cool the refrigerator. Currently, there are mainly two types of car refrigerators on the market: semiconductor car refrigerators and compressor car refrigerators, with the compressor being the traditional technology of conventional refrigerators. Precautions for using a car refrigerator: To use a car refrigerator in a vehicle, plug the power plug into the cigarette lighter socket. When switching from heating to cooling function, it is recommended to turn off the power and restart the car refrigerator after 5 minutes. Always ensure that the car refrigerator's ventilation and heat dissipation holes are unobstructed. Do not place items into the refrigerator's heat dissipation or air intake holes, and keep the refrigerator away from heat sources when in use. When cleaning the car refrigerator, turn off all power and avoid using strong cleaning agents. Do not place magnetic objects inside the car refrigerator as they may affect the internal cooling chip.
Was this review help?
5
2
Share
More Forum Discussions

Does the Toyota Corolla Have a Timing Belt?

Toyota Corolla does not have a timing belt; it uses a timing chain instead. The timing chain serves the same purpose as a timing belt, driving the engine's valve train to ensure the intake and exhaust valves open and close at the appropriate times, allowing the engine cylinders to properly intake and exhaust air. The Corolla is one of Toyota's brands, equipped with 215/45R17 tires, TRD Sportivo high-performance shock absorbers, TRD TF4 17-inch sport rims, reinforced clutch, and high-performance brake pads, ensuring excellent sporty performance. In terms of body dimensions, the Corolla measures 4630mm in length, 1775mm in width, and 1480mm in height.
16
1
Share

How to Set the Electric Seat Memory in Passat?

First, adjust the seat position by pushing the horizontal switch forward to move the seat forward. Press and hold the end of the seat adjustment horizontal switch and lift it upward to raise the seat. Push or pull the top of the vertical switch back and forth to adjust the tilt angle of the seatback. The seat adjustment knob switch is the lumbar support adjustment switch. After adjusting the seat position, press the SET button on the left side of the seat. Then press one of the numbered buttons to save the seat position to the corresponding memory slot. After hearing a beep, the seat memory setting is complete. To use the seat memory function later, locate your memory button and press and hold it.
6
5
Share

How to Reset the Maintenance Light on a 2020 Accord?

Set the power mode to ON and press the HOME button to reset. Below is relevant information: 1. Maintenance Light: The Guangzhou Honda Accord dashboard is equipped with a maintenance light. When the odometer reaches 9600-12000km, the maintenance light will illuminate for 2 seconds upon turning the ignition on. If the owner fails to perform maintenance after exceeding 12000km, the maintenance light will flash continuously to remind the owner to service the vehicle promptly. 2. Types of Maintenance Lights: The appearance of maintenance lights varies by vehicle model. Common types include three: a yellow oil can icon, a yellow wrench icon, or direct text in Chinese stating 'Please change the oil soon.'
5
4
Share

Can Hong Kong cars drive into mainland China?

Hong Kong cars can drive into mainland China, but they need to apply for a cross-border license plate. Here are the relevant details: 1. Regulations: Generally, Hong Kong vehicles entering mainland China require a black Guangdong-Hong Kong (Yue Z) license plate. It's important to note that Yue Z license plates are only valid for driving in Hong Kong and Guangdong Province. Driving beyond Guangdong Province will be penalized by traffic police as "driving without a valid vehicle license plate." 2. Vehicle License Plate: The vehicle license plate is the legal permit allowing a car to drive on the road. It serves as a means for traffic management authorities, public security departments, and the general public to monitor vehicle movement, as well as to identify, remember, and track vehicles.
10
0
Share

How to Remove Plastic Clips?

Removing clips requires specialized tools, which can be borrowed from an auto repair shop. If you don't want to borrow one, you can simply pry them off. If you only need to remove them and won't reuse them later, you can just poke and break the clips with an object, as these clips cannot be reused once removed. Usually, there is a screw mounting point near the interior door handle. Start by removing this screw first. Insert a tool into the gap between the door panel and the door sheet metal, move it to where the clip is located, and gently pry it up to release the clip.
5
3
Share

How to Turn on Cadillac Seat Ventilation?

First, remove the seat from the vehicle and disassemble the upholstery of the removed seat. Seat ventilation involves designers using fans to inject air into the seat. Punch holes in the removed heating pad, create blower holes in the foam, and install the blower. Air flows out through small holes on the seat surface to achieve the ventilation function. Install the ventilation diversion layer and the pressure sensor. When a passenger sits on the seat, the rear part of the body is in close contact with the seat surface, preventing air circulation in the contact area. Organize the wiring harness and complete the installation. The ventilation function effectively improves the air circulation environment between the body and the seat surface, even during prolonged sitting.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.