What Causes a Car Door Not to Unlock with the Key?

1 Answers
DiPaislee
07/30/25 10:30am
Reasons why the car key cannot be turned and the door won't open: It may be due to the steering wheel being locked, which is a common anti-theft feature in many vehicles. Try gently turning the key with your right hand while simultaneously turning the steering wheel slightly with your left hand—this should naturally unlock the steering wheel. Below are details about common car faults: 1. Poor Idle Operation: Symptoms may include unstable idling, engine shaking, excessively high idle speed (above the specified upper limit), excessively low idle speed (below the specified lower limit), or rough idling. These issues may be related to faulty or malfunctioning components such as fuel injectors, oxygen sensors, air flow sensors, or exhaust gas recirculation valves, as well as poor connections in control circuits or vacuum lines. 2. Excessive Fuel Consumption: Common causes include clogged filters restricting airflow, coolant temperature being too high or too low, incorrect ignition timing, valve timing, or idle adjustment, wear and failure of engine or major components, low cylinder pressure, leaks in fuel or air lines and connections, or faults in sensors, connectors, wiring, the ECU, or its connectors in the electronic control system.
Was this review help?
3
5
Share
More Forum Discussions

How Many Years Does It Generally Take for Automotive Fuel Lines to Age?

Fuel delivery lines are generally not prone to damage, and a fuel line can last about three to five years or 120,000 kilometers. The Function of Automotive Fuel Lines: The purpose of the automotive fuel return line is to allow excess fuel to flow back to the fuel tank, reducing fuel consumption. Most modern vehicles are equipped with a fuel return line. When the fuel pump supplies fuel to the engine, it creates a certain pressure. After the normal supply to the fuel injectors, any remaining fuel is sent back to the tank via the return line. Diesel engine fuel supply systems typically have three return lines, though some may only have two, omitting the return line from the fuel filter to the tank. Maintenance Methods for Automotive Fuel Lines: 1. Directly add a fuel system cleaner to the fuel tank—this is the simplest method. A qualified additive can not only reduce fuel consumption but also enhance performance, maintain the engine, and remove carbon deposits. 2. Completely remove the entire fuel line for thorough cleaning. This method is used for vehicles with severely clogged fuel lines but is the most time-consuming and requires the highest technical skill from the technician. 3. Use a no-disassembly cleaning machine. This method involves connecting the engine's fuel supply and return lines to the corresponding lines of a specialized no-disassembly cleaning machine, forming a closed loop with dedicated adapters.
7
1
Share

What are the body dimensions of the Baojun RS3?

The length, width, and height dimensions of the Baojun RS3 are 4300mm/1750mm/1600mm, which are official data. The length of the Baojun RS3 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The naturally aspirated engine of the Baojun RS3 has a maximum power of 73kW and a maximum torque of 143 Nm. This engine reaches its maximum power at 5800 rpm and its maximum torque at 3400-4400 rpm. It features multi-point fuel injection technology and uses an aluminum cylinder head and cast iron cylinder block. This engine is paired with a manual transmission (MT). There are national regulations regarding vehicle dimensions. According to the national standard 'GB1589-89', the total width of a vehicle does not include the rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
16
2
Share

Who to Claim for Vehicle Depreciation After a Car Accident?

Generally, you bear the cost yourself. When purchasing insurance, the policy terms explicitly state that the insurance company is not responsible for compensating the depreciation in the vehicle's market value caused by an accident. This portion must be covered by the policyholder. Arguments Supporting Compensation for Vehicle Depreciation Loss: The reasoning is that although a vehicle damaged in a traffic accident can be repaired, it is difficult to fully restore its original performance, specifications, and safety standards. In the automotive market, vehicles with accident histories are valued significantly lower than those without. This difference in value falls under the category of civil law losses, and the victim should be entitled to corresponding compensation. Arguments Against Compensation for Vehicle Depreciation Loss: The reasoning is that domestic laws do not explicitly stipulate compensation for vehicle depreciation caused by traffic accidents, lacking legal basis. Additionally, the assessment of vehicle depreciation loss is influenced by various factors such as the vehicle's condition, usage, and market prices, making it variable and uncertain. Moreover, the so-called vehicle depreciation loss only becomes apparent when the vehicle is sold. Whether, when, and how the vehicle is sold, and whether the buyer is informed of its accident history, are all unknown. Therefore, it is also inappropriate to support claims for vehicle depreciation loss. Adopting a Cautious and Differentiated Approach to Vehicle Depreciation Loss: In traffic accidents, vehicle losses should be limited to direct damages resulting from the accident, excluding indirect or potential losses such as depreciation. However, for vehicles intended for sale or explicitly used for trading purposes, if damaged in an accident, the difference in their trading price should be recognized, considering their special usage.
8
4
Share

Which country does Geely Group belong to?

Zhejiang Geely Holding Group Co., Ltd. (Geely Automobile) is the only private passenger car manufacturing and operating enterprise among the top ten in China's domestic automotive industry. It has been recognized as the enterprise with the 'fastest development speed and best growth in the 50-year history of China's automobile industry' and ranks among the top ten in the domestic automotive industry. Additional information: 1. Currently, Geely has filed and been granted 14,000 and 12,200 automobile patent applications respectively, including more than 2,700 and 1,400 invention patent applications and grants. It has been listed as one of the 'Top Ten Brands for Enterprise Independent Innovation in China's Intellectual Property' and is a national-level enterprise technology center and postdoctoral workstation, as well as a 'high-tech enterprise'. 2. Geely Automobile Group has established a research institute in Zhejiang and Hangzhou, forming a complete development capability for automobiles, engines, transmissions, and automotive electronics. It has set up design centers in Shanghai, Gothenburg, Spain, Sweden, Barcelona, China, and California, USA, establishing a global architectural design system. The Geely Automobile European R&D Center (CEVT) in Gothenburg lays the foundation for the global competitiveness of mid-range automobiles. 3. Geely Panda, Geely Emgrand EC7, GX7, SUV, and Geely's Pride have achieved brilliant C-NCAP five-star safety evaluations. The independently developed 1.3T turbocharged engine and 1.8TD turbocharged direct injection engine have been awarded the 'China's Top Ten Engines'.
6
1
Share

What are the detailed components of a transmission structure?

Regarding the detailed components of a transmission structure, the following points are outlined: 1. Automotive transmissions can be categorized by control method into manual transmissions and automatic transmissions. Common automatic transmissions mainly include four types: Automated Manual Transmission (AMT), Hydraulic Automatic Transmission (AT), Continuously Variable Transmission (CVT), and Dual-Clutch Transmission (DSG). 2. Functions of a transmission: Changing gear ratios to expand the range of torque and speed variations at the drive wheels, enabling the vehicle to reverse while maintaining the engine's rotation direction, and utilizing neutral gear to interrupt engine power transmission, allowing the engine to start and idle.
15
1
Share

Is it allowed to press the accelerator in Subject 2 test?

It is allowed to press the accelerator in Subject 2 test. Subject 2 test opportunities: For the motor vehicle driver's license Subject 2 test, candidates can take the test twice on the same day. If the first attempt fails, the candidate needs to drive the vehicle back to the original test location, re-verify their identity, and then begin the second test attempt. Subject 2 test time limit: The time limit is three years. The countdown starts after completing Subject 1 of the motor vehicle driver's license test. All subjects of the driver's license test must be completed within this three-year period.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.