What causes a Buick Excelle automatic transmission to suddenly stall while driving?

1 Answers
LeSilas
07/30/25 2:11am
Common causes of sudden engine stalling in vehicles include: 1. Vacuum leaks in the intake manifold; 2. Unstable idle due to improper idle adjustment, dirty throttle body, or malfunctioning idle control system; 3. Unstable fuel pressure caused by excessive wear or poor contact of the electric fuel pump brushes, or clogged fuel pump filter; 4. Blocked or leaking EGR valve; 5. Malfunctioning fuel pump relay, EFI relay, or ignition relay; 6. Poor contact in the fuel pump drive circuit or fuel injector drive circuit; 7. Ignition system issues such as weak or no spark due to worn spark plugs, incorrect ignition timing, poor contact in the ignition coil, or inter-turn short circuits when hot, as well as poor contact in low-voltage circuits, damaged insulation causing intermittent grounding, or poor grounding.
Was this review help?
11
0
Share
More Forum Discussions

What is the reason for the Nissan Sylphy remote control not responding when pressed?

Nissan Sylphy remote key failure is usually caused by the battery running low. You can split the remote key along the middle seam and replace it with a new battery. If that doesn't work, try re-matching the remote. Since smart keys use low-intensity radio waves, they may not function properly in the presence of magnetic interference. Frequently placing the smart car key and mobile phone together will inevitably cause the smart car key to malfunction. The basic components of a remote key are as follows: 1. Transmitter: Composed of a transmission switch, transmission antenna, integrated circuit, etc., containing an identification code storage circuit and an amplitude modulation circuit, with a button-type lithium battery on the opposite side of the circuit. The transmission frequency uses radio waves, and pressing the transmission switch button once sends a signal. 2. Receiver: After the transmitter sends the identification code using shortwave modulation, it is received by the car's shortwave antenna and enters the shortwave high-frequency amplification processor of the receiver's electronic control unit through a distributor for demodulation, where it is compared with the demodulator's identification code.
2
1
Share

What are the harmful gases emitted by vehicles?

Mainly include: carbon monoxide, hydrocarbons, nitrogen oxides, sulfur dioxide, smoke particles, and foul odors. Smoke particles contain certain heavy metal compounds, lead compounds, black smoke, and oil mist. The hazards of harmful gases emitted by vehicles are as follows: 1. Excessive emission of harmful gases from vehicles can cause a sharp increase in urban temperatures. Since the harmful gases emitted by vehicles include carbon dioxide, excessive carbon dioxide can lead to the greenhouse effect and damage the ozone layer. After the ozone layer is destroyed, the sun will directly irradiate the Earth's surface, causing temperatures to rise. 2. It can harm human health. After inhaling vehicle exhaust, the human respiratory system can be damaged. 3. It can disrupt the Earth's ecology and climate. In recent years, the emission of harmful gases from vehicles has increased, often leading to phenomena such as acid rain and black rain, which can affect the extinction of organisms.
5
0
Share

What does the bulb exclamation mark warning mean in Volkswagen?

Volkswagen's bulb exclamation mark warning is the bulb failure indicator, indicating that a bulb has burned out. A vehicle has various lights such as headlights, parking lights, turn signals, license plate lights, fog lights, brake lights, etc. If any of these bulbs are not functioning, the bulb failure warning light will illuminate. Below are introductions to other related warning icons with exclamation marks: 1. On the left is an icon resembling a steering wheel, and on the right is an exclamation mark, with the entire icon in red. This is the steering system warning light, indicating an issue with the steering system. 2. A triangle with an exclamation mark in the middle is the general fault indicator. This light indicates that certain components of the vehicle have issues, such as overheating of the dry dual-clutch transmission clutch, parking sensor problems, engine oil pressure sensor issues, external light problems, etc. 3. The entire symbol is yellow, featuring an irregular arc that is not closed at the top, with four small protrusions at the bottom and an exclamation mark in the middle. This symbol is the tire pressure monitoring indicator, also known as the TPMS warning light, indicating abnormal tire pressure.
12
4
Share

What Are the Reasons for Fast Power Consumption in Cars?

Reasons for fast power consumption in cars: 1. Battery drain caused by leaving electrical switches on while parked; 2. Battery drain due to self-discharge caused by short circuits or oxidation and shedding of battery plates; 3. Leakage caused by grounding of electronic components and circuits such as car electrical appliances, wiring harnesses, sensors, and controllers. Methods to save fuel in vehicles are as follows: 1. Drive at a constant speed: Control the vehicle speed while driving and avoid sudden braking; 2. Do not open windows when driving at high speeds: Opening windows at high speeds increases fuel consumption; 3. Regularly check tire pressure to ensure it is correct: Both under-inflation and over-inflation can increase fuel consumption, so it is necessary to check tire pressure regularly; 4. Pay attention to transmission maintenance: Be sure to replace the transmission oil that matches the vehicle. Transmission oil not only lubricates but also transmits torque, so it should be replaced regularly.
8
3
Share

What is the reason for the Roewe RX5 dashboard lights all on and the car not starting?

Possible reasons for all dashboard indicator lights being on and the car not starting include: 1. Insufficient fuel pressure; 2. Incorrect throttle position sensor signal; 3. Poor fuel pump performance; 4. Poor spark plug performance. 5. Starter motor failure, or issues with fuel pump supply, fuel injectors, sensor malfunctions, etc. Additional information: 1. Location of the fault indicator in the car: The fault indicator is generally installed inside the dashboard of the driver's compartment. 2. Function of the fault indicator: The fault indicator's role is to light up when a system malfunction occurs during normal vehicle operation, alerting the driver to pay attention and proceed to a designated service station for repairs. 3. Types of fault indicators: Engine fault light, airbag system fault light, ABS system fault light, and transmission control system fault light. 4. Structural principle of the fault indicator: Composed of a bulb, self-diagnostic system, fault circuits, etc., it can promptly diagnose the location of a fault when the system malfunctions, and the fault indicator will also illuminate.
9
1
Share

Does an upward-facing exhaust pipe have any impact during rainy weather?

The upward-facing exhaust pipe of a car does not significantly affect the vehicle during rainy weather. Here is more information about the exhaust pipe: 1. Exhaust Pipe: The exhaust pipe is part of the engine's exhaust system, which mainly includes the exhaust manifold, exhaust pipe, and muffler. The three-way catalytic converter, which controls engine pollutant emissions, is generally installed in the exhaust system. The exhaust pipe usually consists of the front exhaust pipe and the rear exhaust pipe. 2. Precautions: If the exhaust pipe leaks, the cause of the leak should be identified promptly, and the vehicle should be taken to a repair shop for immediate repairs. 3. Material Selection: Choose materials with a small thermal expansion coefficient, high thermal conductivity, and good resistance to high-temperature oxidation under repeated heating and cooling conditions, such as ferritic stainless steel, which also has excellent corrosion resistance.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.