What Causes a BMW 5 Series to Shake When the Air Conditioning is Turned On?

1 Answers
CassandraMarie
07/25/25 2:18pm
When the air conditioning is turned on in a BMW 5 Series, the shaking occurs because the air conditioning compressor consumes engine power, increasing the engine load and reducing the engine speed, which leads to engine vibration. Below is some relevant information about the BMW 5 Series: 1. Introduction: The domestic 5 Series is a high-end sedan. The current generation of the 5 Series was introduced in 2004. The BMW 5 Series is undoubtedly one of the most outstanding series in automotive history, with its peak era beginning with the third generation, the E34. The current 5 Series is the third-generation product of the E34. 2. Development History: In 1972, BMW introduced the first-generation BMW 5 Series sedan, codenamed E12, at the IAA Motor Show. In 1973, BMW launched the 525, a six-cylinder engine model with 145 horsepower.
Was this review help?
19
4
Share
More Forum Discussions

What to Do When the Left Reverse Parking is Too Close to the Left Side?

Turn the steering wheel one full turn plus 90 degrees to the left when there is still some distance to the parking line in the left rearview mirror. Predict whether the car body will cross the line; if you continue reversing in the current direction and the distance between the car body and the corner of the parking space is too narrow, turn the steering wheel back half a turn to widen the distance.
20
3
Share

What to Do When the Car Dashboard Water Temperature Reaches C?

When noticing the car's water temperature enters the warning zone, if the vehicle is driving at low speed, this usually indicates a cooling system issue. Find a safe location that doesn't obstruct others. While driving at high speed, if you notice the car's water temperature entering the warning zone, don't turn off the engine immediately after pulling over. Instead, let the engine idle for a while.
14
1
Share

What to Do When There Are White Particles on the Car Body Surface That Can't Be Wiped Off?

Spray and scrub vigorously at the same time. These small particles are very fine, and they may appear shiny if not noticed carefully, but you can feel them when touched or examined closely. Use clay to remove the white particles. If the issue persists for a while, you can use BOTNY sand wax to polish the paint surface.
9
4
Share

What to Do When There Is Fuel Overflow at the Fuel Tank Opening?

When refueling, reduce the flow rate as the tank nears full capacity. Wait for the bubbles to dissipate slowly before continuing to add fuel. The tank will not spray fuel if it is not filled to the brim. If fuel overflows onto the painted surface, it can corrode the vehicle's paint, leading to peeling. Fuel vapor will also be generated inside the fuel tank.
7
3
Share

What to Do When the Annual Inspection Stamps on the Driving License Are Full?

If the annual inspection stamps on the driving license are full, you can apply for a new driving license at the local vehicle management office. If the owner cannot be present due to special circumstances, an agent can handle the procedure on their behalf. The replacement of the motor vehicle driving license must be processed at the branch office of the vehicle management office where the vehicle is registered.
19
4
Share

What to Do When the Magotan Cannot Access the Navigation System After Replacing with RNS315?

Insert the disc when the RNS315 is turned on. There will be no display on the screen during the installation process, and a dialog box will pop up once the installation is complete. Turn on the head unit, insert the prepared upgrade disc, and follow the prompts to install. The installation process does not affect the use of any functions. After installation, you must use the 5053 software to unlock the coding and enable the function to activate the navigation. Remove the disc and restart the system.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.