What Causes a 48V Motor Failure?

1 Answers
DeJayla
07/30/25 1:27am
For motor failures, it is recommended to visit a 4S shop for inspection and repair as soon as possible. Below is a detailed introduction: 1. Mercedes-Benz 48V Motor: The primary function of the Mercedes-Benz 48V motor is to start the vehicle and recover kinetic energy. It can also directly drive the vehicle during low-speed stop-and-go situations without starting the engine, and it can work in tandem with the engine to provide additional power during acceleration. 2. Core Components: The core components include the 48V battery, 48V starter motor/generator, a 48V/12V (DC/DC) voltage inverter, and the corresponding control modules. When seeking after-sales service, ensure that the service center issues a formal repair order. Formal repair orders are entered into the manufacturer's system, allowing for tracking and tracing. Avoid accepting handwritten notes, as they are not recorded in the manufacturer's system.
Was this review help?
17
0
Share
More Forum Discussions

What causes the sudden increase in RPM while driving a Haval H6?

Haval H6 experiencing a sudden increase in RPM while driving is due to clutch slippage. It is recommended to visit a repair shop for inspection. Detailed introduction of the Haval H6: The Haval H6 is the flagship model of the Haval brand. Since its launch in 2011, it has topped sales for 78 consecutive months, with nearly 3 million owners (as of November 2019). The all-new Haval H6, as the flagship product in the H6 lineup, is positioned as a "100,000-level national favorite car with stronger power and better fuel efficiency." It comes with two powertrain options: 1.5GDIT/2.0GDIT + wet 7DCT. Powertrain of the Haval H6: The all-new Haval H6 is equipped with a 1.5GDIT/2.0GDIT + wet 7DCT powertrain. The 1.5GDIT engine features world-leading CVVL (Continuous Variable Valve Lift) technology, an integrated exhaust manifold in the cylinder head, and other advanced technologies. It delivers a maximum power of 124kW and achieves a peak torque of 285N•m at just 1400rpm. This engine was awarded the title of "China's Heart" Top 10 Engines in 2017.
5
1
Share

What is the top speed of the Monkey motorcycle?

The top speed of the Monkey motorcycle can reach 100 kilometers per hour. Model features: The Monkey motorcycle is a mini two-wheeled motorcycle produced by HONDA. This model has a small displacement, low seat height, simple operation, high safety factor, fuel consumption of about 1.5 liters per 100 kilometers, and foldable handlebars for easy portability. Power specifications: The engine is 49cc, single-cylinder air-cooled four-stroke, with three forward gears and a semi-automatic transmission. It uses 5-inch rims and fat tires. This model comes in various configurations, including a disc front brake, hydraulic spring upright front fork, 12V system voltage, and electric start type.
14
3
Share

What is the difference between 1.5L and 1.5T cars?

1.5L and 1.5T cars differ in the following aspects: 1. Different working principles: (1) A 1.5L naturally aspirated car relies on negative pressure in the cylinder to intake air, and the concentration of air drawn into the cylinder is normal. (2) A 1.5T car derives the kinetic energy of its turbocharger from the exhaust gases, hence the turbo is also known as an exhaust gas turbo. The exhaust gases expelled by the engine impact the turbine, driving the impeller on the other side to compress air, which is then sent into the engine. This results in more complete combustion of the fuel in the engine, delivering stronger power. 2. Different fuel consumption: (1) The 1.5T consumes more fuel because the turbocharger compresses more air into the cylinder, and the engine's electronic fuel injection system adjusts the fuel injection volume based on the air intake, increasing fuel injection as air intake rises. (2) The 1.5L consumes less fuel. 3. Different prices: Due to the additional turbocharger in the 1.5T engine, 1.5T cars are more expensive. 4. Different levels of development maturity: Naturally aspirated engines are the earliest type of engines, while turbocharging adds a turbocharger to the naturally aspirated engine. Naturally aspirated cars have more mature technology, and naturally aspirated engines offer greater reliability.
5
2
Share

How to Solve Car Resonance?

Solutions for car resonance: 1. Replace the engine mounts; 2. Adjust the connection points of the chassis crossmember; 3. Perform overall maintenance on the engine to reduce resonance caused by operating conditions; 4. Apply sound insulation and vibration damping treatment to the engine front axle. Every car has a resonance point, and the speed at which resonance occurs varies. Generally, it is believed that the higher the speed at which resonance occurs, the better the quality of the car. If the car shakes when the air conditioning is turned on, this is not resonance but rather insufficient engine power. Resonance refers to a physical system vibrating with greater amplitude at specific frequencies compared to others, and these specific frequencies are called resonance frequencies.
14
4
Share

Does Parking on a Slope Have Any Impact?

Parking on a slope does have an impact. Prolonged parking on a slope can easily cause damage or even complete failure to the vehicle's braking system and suspension system. The car's braking system, also known as the automobile brake system, enables the car to decelerate and stop as required by the driver. It ensures that a stationary vehicle remains stable under various road conditions and helps maintain a steady speed when driving downhill. The car's braking system only functions when the engine is running. Currently, most vehicles use a front disc and rear drum brake system, while some models employ a four-wheel disc brake system.
15
1
Share

What type of oil does DD250E use?

DD250E uses 10W40 grade engine oil. Application range: The number 10 indicates the minimum applicable temperature of the oil is -25°C, W stands for Winter, and 40 represents the high-temperature viscosity of the oil, with a kinematic viscosity of 14.5cst at 100°C. The preceding number denotes the oil's low-temperature fluidity - the smaller the number, the better the low-temperature fluidity. The number after W indicates the oil viscosity grade at 100°C. Importance of viscosity: Lubricating oil must have sufficient viscosity to prevent wear between moving parts and to form an oil film between moving components at various operating temperatures. However, the oil's fluidity shouldn't be so high as to affect engine startup, while generating minimal friction under continuous operation conditions. Using oil with excessive viscosity will increase component wear.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.