What category does the yellow dashed line belong to?

1 Answers
CooperMarie
07/30/25 8:36am
Road center yellow dashed lines are used to separate opposing traffic flows and are classified as indicative markings. Below is relevant information about traffic markings: Definition: Traffic markings refer to identifiers on road surfaces that convey guidance, restrictions, warnings, and other traffic information to road users through lines, arrows, text, vertical markings, raised pavement markers, and delineators. Function: To regulate and guide traffic, which can be used in conjunction with signs or independently. Generally, highways, Class I/II roads, urban expressways, and arterial roads should be equipped with reflective traffic markings as per standards, while other roads may set traffic markings according to needs and standards.
Was this review help?
11
4
Share
More Forum Discussions

What is the wheelbase of the Crown?

The wheelbase of the Crown is 2925mm. Here are the detailed specifications of the Crown: 1. Dimensions: The Crown is positioned as a mid-to-large size sedan, with a body length of 5020mm, width of 1805mm, height of 1480mm, and wheelbase of 2925mm. 2. Powertrain: The entire lineup is equipped with a 2.0T inline 4-cylinder turbocharged engine, paired with an 8-speed automatic transmission. It delivers a maximum power of 173KW (235PS) and maximum torque of 350N·m. The fuel supply system adopts hybrid injection. All models feature rear-wheel drive.
6
5
Share

What does it mean when the EPC light on the car is on?

The EPC indicator light can illuminate in two states: during the power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle is monitoring the status of all sensors before driving. Generally, if the vehicle is not started after powering on, the light will turn off by itself after about 3 seconds. In other cases, if the EPC light remains on or does not turn off for a long time after the vehicle is started, the possible causes include faults in the engine intake system, throttle valve, fuel system, engine, ECU control unit, brake lights, or anti-theft system. Below is a detailed explanation of the reasons and solutions for the EPC light illuminating under other circumstances: Engine intake system fault: The EPC light will illuminate if the engine intake is obstructed or insufficient. Solution: Open the intake manifold switching valve cover, place a listening rod against the intake manifold switching valve, start the engine, and repeatedly press the accelerator pedal to clear the obstruction. Throttle valve fault: Carbon buildup is a common issue with the throttle valve. Additionally, dirt on the main body can affect intake and trigger the indicator light. Solution: Remove the throttle position sensor and install a new one on the throttle valve. Fuel system fault: Issues such as substandard fuel, fuel deterioration, or poor fuel atomization can occur. Solution: Use the appropriate fuel grade for the vehicle model. Engine fault: Insufficient engine pressure or problems with the intake valve or other power system components can also trigger the EPC light. Solution: Clean carbon deposits from the relevant parts. ECU control unit fault: For example, interference with the vehicle computer signal or false alarms from the vehicle computer. Solution: Reflash the ECU data. Brake light fault: Issues such as brake lights not working, brake switch failure, or brake circuit problems. Solution: Visit a repair shop or 4S store to replace the brake lights. Anti-theft system fault: If the car's electronic anti-theft system malfunctions or the anti-theft controller does not match the engine electronic controller, the EPC light will illuminate. Solution: Seek professional assistance at a repair shop, as this cannot be fixed individually. If the EPC light illuminates, the owner can first try turning off the engine and restarting it to see if the light remains on. If it does not, there may be no issue, and the EPC light might have been affected temporarily. If the EPC light stays on or frequently illuminates, drive to the nearest repair point for professional assistance to diagnose and resolve the issue, ensuring safety. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system mainly includes controllers and sensors related to the power system. When sensor data in the system is abnormal, the EPC system will take predefined measures for the power system. Common EPC indicator lights are usually displayed in two colors: yellow and red. If the EPC fault light is yellow and the car can still drive normally, proceed slowly to a repair point for inspection. If the EPC fault light is red, the situation is more serious. Pull over immediately and contact a professional for repairs. Continuing to drive could damage the car's core components or compromise safety.
16
2
Share

What is the depreciation period and residual value rate for sedans?

The depreciation period for sedans is ten years with a residual value rate of 5%. Here are the specific calculation methods: 1. First three years: The value decreases by 15% annually for the first three years; 2. Middle four years: The value decreases by 10% annually for the middle four years; 3. Last three years: The value decreases by 5% annually for the last three years. Note: Considering factors such as changes in new car prices, depreciation rates, and vehicle condition patterns, selling the car in the third year or the sixth year is actually the most cost-effective. The residual value rate for vehicles that are one to two years old and considered '80% new' is the lowest because new car prices are immediately discounted by 20% once sold by 4S dealerships.
14
3
Share

Unable to Print After Several Days of Fatigued Driving?

Fatigued driving for four hours results in inability to print. Here is expanded information about fatigued driving: According to relevant Chinese laws, fatigued driving constitutes a traffic violation that easily leads to accidents, making it extremely dangerous. Generally, fatigued driving records check whether the immediate continuous driving time exceeds 4 hours, with earlier periods typically not being reviewed. Definition of fatigued driving: Continuously operating a motor vehicle for over four hours without stopping to rest or with a rest period of less than 20 minutes. Penalties for fatigued driving: For excessively fatigued driving, the "Road Traffic Safety Law" authorizes provinces, municipalities, and autonomous regions to independently establish fine ranges. For drivers of highway passenger vehicles or hazardous materials transport vehicles exhibiting excessively fatigued driving behavior, the Ministry of Public Security uniformly stipulates a 6-point deduction, while new regulations impose a 12-point penalty for fatigued driving.
10
2
Share

Should I Use 30 or 40 Weight Oil for Oil Burning?

If your car is experiencing oil burning, it is recommended to use oil with a higher viscosity. If your car originally requires 30-weight oil, you can switch to 40-weight oil. If your car originally requires 20-weight oil, you can switch to 30-weight oil. Oil burning is generally caused by excessive clearance between the piston rings and cylinder walls, and it is common in cars with high mileage. Here is some additional information about oil: Oil burning is usually caused by excessive clearance between the piston rings and cylinder walls, and it often occurs in cars with high mileage. In some cases, oil burning in car engines is caused by a faulty oil separator. If the oil is not changed for a long time, oil burning may occur in the engine. Prolonged failure to change the oil can reduce the sealing performance of certain rubber seals inside the engine, leading to increased oil consumption.
7
2
Share

Can I change from C2 to C1 after registration?

C2 can be changed to C1, but a re-examination is required. The examination subjects include four items: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving common sense. Passing standards: Traffic regulations and related knowledge (Subject 1) - Written test, full score is 100, 90 or above is passing. Field driving (Subject 2) - On-site, actual vehicle. The minimum requirement is 80 points, below 80 is failing. Road driving (Subject 3) - Highway or simulated field, actual vehicle. Full score is 100, must achieve 90 or above to pass. Safe and civilized driving common sense - Written test, questions mainly in the form of cases, pictures, animations, etc., question types include true/false, single-choice, and multiple-choice, totaling 50 questions, full score is 100, 90 is passing.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.