What Cars Do 4S Stores Sell?

1 Answers
JaydenRose
07/25/25 1:42pm
4S stores only sell the car brands under their brand. Different 4S stores sell different brands of cars. The following is an introduction to 4S stores: 1. Introduction: 4S stores, fully known as Automobile Sales Service 4S Stores, are sales outlets that integrate car sales, maintenance, parts, and information services. They entered China from Europe after 1998. 2. Features: 4S stores are invested and built by dealers according to the standards set by car manufacturers. The stores have unified designs inside and out, with huge investments often exceeding tens of millions, featuring luxury and comfort. They can only sell single-brand cars specially authorized by the manufacturers. 3. Business Scope: The 4S store model has developed extremely rapidly in China in recent years. The 4S stores in the automotive industry are a business model introduced by car manufacturers to meet customers' service needs. The core meaning of 4S stores is 'Automobile Lifetime Service Solution'.
Was this review help?
12
0
Share
More Forum Discussions

Can tires still be used after five years?

Five-year-old tires should not be used. Generally, tires need to be replaced every 5 years or after driving 60,000 to 80,000 kilometers. Below are the specific details regarding car tire replacement: Tire replacement cycle: For drivers with good driving habits, tires typically need to be replaced every 3-5 years or after covering 60,000 to 80,000 kilometers. If the vehicle is frequently driven under harsh conditions, such as on gravel roads or in situations involving frequent traffic jams, sudden braking, or sharp turns, the replacement interval will be shorter. Tire aging period: The primary material of tires is rubber, which undergoes natural aging. This aging manifests as hardening of the tire and the appearance of small cracks on the sidewalls. The natural aging period is usually 4-5 years. Tires that have been in use for five years should be replaced promptly to prevent the risk of blowouts.
4
3
Share

What to do if the wheel hub is severely scratched?

The treatment methods for severely scratched wheel hubs are as follows: 1. First, clean the wheel hub: Thoroughly clean the wheel hub (I removed the wheel hub for easier handling, but it's also fine to leave it on). After cleaning, dry it with a towel, making sure to wipe off any grease on the surface, as this can affect the painting later! Removing the wheel hub also allows you to clean off the considerable amount of metal shavings and stone debris on the wheel. 2. Smooth the scratched area of the wheel hub: Since the scratched areas are rough, they must be smoothed with sandpaper, using 150# sandpaper for this step. After smoothing (check by hand to ensure it's even), apply putty (wheel hub filler) evenly to the scratched area (ensure the grooves are filled), and wait for the putty to dry! Then continue smoothing with 320# and 800# sandpaper, making sure it's very smooth. 3. Apply paint and clear coat: After the above steps are completed, you can proceed to paint. Before spraying, cover the tire and any parts that don't need painting. Then spray evenly (note: spray in multiple thin layers, waiting for each layer to dry before applying the next, to avoid runs or sagging. After the wheel hub paint dries, finally apply a clear gloss coat.
13
1
Share

What do the icons in the car represent?

Icons inside the car are categorized by function, including indicators, warning lights, and fault icons. A red fault light indicates the severity of a car problem, which is critically related to driving. If warning lights such as the handbrake warning light, seatbelt warning light, engine temperature warning light, brake system warning light, or engine oil level warning light illuminate, it means the car has a fault and should not be driven further. Commonly seen and frequently used icons include door alerts, handbrake alerts, seatbelt alerts, and engine self-checks. Common indicators and warning symbols on the dashboard are as follows: 1. The engine oil warning light is symbolized by an oil can. If this warning light appears, it indicates insufficient oil pressure to meet the engine's lubrication needs, so immediate inspection and repair are required. 2. The coolant temperature warning light is symbolized by a thermometer. When this light illuminates, it means the engine coolant temperature is too high. You should immediately stop and turn off the engine, waiting until it cools down to normal temperature before continuing to drive. 3. The ABS indicator light turns on when the ignition is activated and should go off after about 3-4 seconds, indicating the system is functioning normally. If it doesn't light up or stays on, it means there is a system fault. In this case, you can continue driving at low speed but should avoid sudden braking. 4. The brake system fault light turns yellow when the parking brake is engaged. If this light turns red while driving, it indicates the brake fluid level in the reservoir is too low or there is a fault in the braking system. Immediate inspection is necessary. 5. The tire pressure warning light resembles a stove with an exclamation mark in the middle. When this light illuminates, you should immediately check the car's tire pressure. For most cars, a tire pressure of 2.5 bar is ideal.
16
1
Share

Should You Shift to Neutral at Red Lights with an Automatic Transmission?

When waiting at a red light with an automatic transmission car, you can shift to neutral (N), and if the wait is prolonged, you can also engage the handbrake. Below is an introduction to gear selection while waiting at red lights: Duration for shifting to N gear at red lights: When waiting at a red light, briefly shifting to N gear is generally fine, but leaving it in N gear for extended periods can harm the vehicle, especially the transmission. Keeping the car in D gear while braking at a red light is akin to pressing both the accelerator and brake simultaneously in a manual transmission car. In this scenario, fuel consumption increases, and over time, the torque converter remains under stress for prolonged periods, accelerating wear on components like the torque converter. Avoid shifting to P gear at red lights: You should not shift to P gear while waiting at a red light because engaging P gear without the handbrake can damage certain components; starting from P gear involves cumbersome steps; frequently shifting to P gear can cause gear grinding in the automatic transmission, damaging its bearings. The correct approach is to shift to N gear while braking; when the light turns green, shift to D gear and proceed.
1
3
Share

What is the passing score for the four subjects of the driver's license test?

The full score for each of the four subjects is 100 points. A score of 80 points for subjects two and three, and 90 points for subjects one and four is considered passing. The test selects 50 questions proportionally from the corresponding question bank based on the type of driver's license being tested. For small vehicle licenses, questions are selected from 800 questions, while for large vehicle licenses, questions are selected from 1023 questions. The test questions include animation questions, picture questions, scenario recognition questions, and text-based questions. The test duration is 30 minutes, and answering 6 questions incorrectly will terminate the test and result in a failing grade. For multiple-choice questions in subject four, points will be deducted for both over-selecting and under-selecting answers, and these will be treated as incorrect answers. For multiple-choice questions, all correct answers must be selected; over-selecting or under-selecting will result in no points being awarded.
19
4
Share

How to Activate Electronic ETC?

ETC Activation: Insert and remove the ETC card twice consecutively until the electronic tag screen displays 'Bluetooth On'. If 'Tag Invalid' appears when inserting and removing twice without the electronic tag attached, this is normal and does not affect activation. Alternatively, you can directly press the button on the top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth, open the corresponding mobile app (usually with a download QR code on the electronic tag), and enter the device activation interface. Click 'Device Connection' and wait patiently for the 'Connection Successful' prompt. Once connected, upload a photo of the vehicle's front to complete activation. Installation is not mandatory. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by allowing vehicles to pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Cost-saving: Reduces expenses by minimizing vehicle start-up and braking frequency, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase vehicle passing efficiency by 2-3 times, making traditional ETC systems more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. How ETC Works: Through dedicated short-range communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at toll stations, computer networking technology is used for backend settlement processing with banks. This enables vehicles to pass through highway or bridge toll stations without stopping while paying the required fees.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.