What car is the Toyota Sequoia?

1 Answers
McBlakely
07/29/25 4:14pm
Sequoia is the Toyota Sequoia. Below is the relevant introduction: Rear seat design: The Sequoia adds an optional DVD video entertainment system for rear-seat passengers, which includes a sturdy display screen that can be lowered from the roof with a light touch of a finger. Chassis design: The Sequoia adopts a newly designed chassis with improved load capacity and rigidity, while also ensuring the necessary comfort for daily use. It is equipped with a 5.7-liter DOHC-V8 engine from the Lexus LX570, featuring Toyota's proud VVT-i variable valve timing system, delivering a maximum horsepower of 381. Additionally, further tuning has advanced the peak torque point for easier daily use.
Was this review help?
10
5
Share
More Forum Discussions

How many kilometers can a Mercedes-Benz G63 travel on a full tank of fuel?

The G63 can travel approximately 500 kilometers on a full tank of fuel. Below is some relevant information about this vehicle: 1. Introduction: The Mercedes-Benz G63 is an off-road vehicle launched by Mercedes-Benz. The design of this car is very distinctive, with a highly recognizable appearance. This model can be considered one of the world's most powerful all-terrain off-road vehicles, demonstrating strong off-road performance on any type of road. 2. Performance: In terms of performance, this vehicle is equipped with a 5.5L V8 engine, which delivers a maximum power output of 544 horsepower and a maximum torque of 760 Newton-meters. According to official information, the car accelerates from 0 to 100 km/h in 5.4 seconds, with a top speed of 210 km/h.
4
0
Share

What is the maximum ground clearance of the Audi A4?

The minimum ground clearance of the Audi A4 is 175mm. The minimum ground clearance of the Audi A4 refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the Audi A4, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds will decrease. The Audi A4 (Audi A4) is a B-segment model manufactured by FAW-Volkswagen and launched in April 2003. The Audi A4 measures 4763 cm in length, 1826 cm in width, 1426 cm in height, and has a wheelbase of 2903 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the Audi A4 is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Audi A4's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For well-paved urban roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferred to avoid underbody scraping or damage, considering its off-road performance.
12
0
Share

Is the Porsche Cayenne's Engine Made by Volkswagen?

Porsche Cayenne's engine is indeed part of the Volkswagen Group and is manufactured at Porsche's factory in Stuttgart. The Porsche Cayenne 3.0T engine model is CTM, with a maximum power output of 250kW and a maximum torque of 450Nm. The 2.9T engine model is EA839, delivering a maximum power of 324kW and a maximum torque of 550Nm. The 4.0T engine model is DCU, boasting a maximum power of 471kW and a maximum torque of 850Nm. For daily maintenance of the Porsche Cayenne's engine, the following methods can be employed: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, ensuring the selection standard meets or exceeds the manufacturer's requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will degrade over time. After a certain mileage, its performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an adequate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication points, accelerating engine wear and increasing internal contamination. Periodically clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger quantities precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates smoothly but also extends the lifespan of both the radiator and the engine.
15
1
Share

Can the wheel rims of the Haval F7x be enlarged?

Haval F7x wheel rims can be enlarged, here is the relevant information: 1. Advantages: After enlarging and widening the wheels, the contact area between the car and the ground increases. While gaining greater traction and enhancing driving stability, it may slightly reduce the handling performance during emergency lane changes or turns. 2. Introduction: The first generation consists of double-row angular contact bearings. The second generation has a flange on the outer race for fixing the bearing, allowing the bearing to be simply slipped onto the wheel axle and secured with a nut. The third-generation wheel hub bearing unit integrates the bearing unit with the anti-lock braking system. The wheel hub unit is designed with inner and outer flanges, where the inner flange is bolted to the drive shaft, and the outer flange holds the entire bearing assembly together.
15
2
Share

What is the normal tire pressure for the Nissan Sylphy Classic?

The normal tire pressure range for the Nissan Sylphy Classic is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data is based on the international standard GBT2978-2008. To check the current tire pressure of the Sylphy during daily driving, you can activate the tire pressure monitoring system. The tire pressure monitoring icon is located on the instrument display screen, which directly shows the specific values of all four tires. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates uneven wear on the central tread of the tire, shortening its lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire components, causing abnormal heating due to excessive rolling; degrades the function of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure: Usually triggers an alarm when pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the system will still record the previous data, causing the indicator light to come on. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. For sensor damage, replacement with a new part is the only solution.
20
3
Share

What Does the Exclamation Mark in a Passat Mean?

When an exclamation mark appears on the car dashboard, there are five possible scenarios: general fault, automatic transmission fault, braking system fault, abnormal tire pressure, and lighting fault. Below is a detailed analysis of these five situations: General Fault: A triangle with an exclamation mark inside indicates a general performance or component malfunction. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is recommended to visit a 4S shop for diagnosis and repair to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission issue or low transmission fluid level. The transmission fluid should be replaced promptly. Braking System Fault: An exclamation mark inside a circle with parentheses represents a braking system warning, typically indicating a braking system malfunction or low brake fluid level. Immediate inspection and repair of the braking system are necessary to avoid accidents. Abnormal Tire Pressure: An exclamation mark with a horizontal line below parentheses is the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lighting system. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.